Tender For Construction Of Pumping Room, Installation Of Pumps And Laying Of Pipe Line Near Boundary Wall In 1X660mw Area For Dewatering Of Drainage Water From Drains Of Colony Area At Harduaganj Thermal Power Station, Kasimpur, Aligarh, Uttar Prades
Tender Value
14.83 Lakhs
Estimated cost
Bid Submission
15 Mar 2023
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kasimpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Pumping Room, Installation Of Pumps And Laying Of Pipe Line Near Boundary Wall In 1X660mw Area For Dewatering Of Drainage Water From Drains Of Colony Area At Harduaganj Thermal Power Station, Kasimpur, Aligarh, Uttar Pradesh
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning jungle, brushes including uprooting of rank vegetations, grass bush wood tree & sapling of gift up to 30 cm. removal or rubbish up to a distance of 50 cm. outside the periphery of areas cleared. |
| 2 | Earth work in excavation by mechanical means(Hydraulic excavator) /manual means over area (exceeding 30cm in depth ,1.5 m in width as well as 10 sqm on plan) including disposal of excavated earthlead up to 50m & lift up to 1.5 m, ,disposed earth to be levelled and neatly dressed. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:2:4 (1 Cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:4:8 (1 Cement : 4 coarse sand : 8 graded stoneaggregate 40 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars, piers, abutments, posts and struts, etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work inbeams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 7 | Centering and shuttering including strutting, propping etc. andremoval of form for :Foundations , Footings, bases for columns |
| 8 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses et |
| 9 | Centering and shuttering including strutting, propping etc. andremoval of form for :Suspended floors, roofs, landings, balconies and access platform. |
| 10 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Cold twisted bars |
| 11 | Brickwork with common burnt clay FPS(non-modular) bricks of class designation 7.5 in foundation and plinth: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 12 | Brickwork with common burnt clay FPS(non-modular) bricks of class designation 7.5 in super structure above plinth level up to floor v level in all shapes and size Cement mortar 1:6 (1:cement : 6coarse sand ) |
| 13 | Providing and fixing ISI marked oxidized M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm |
| 14 | Providing and fixing ISI marked oxidized M.S. pressed butt hinges with necessary screws etc. complete. 75x47x1.70 mm |
| 15 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 16 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 17 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 18 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 19 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece |
| 20 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 110 mm diameter |
| 22 | 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) |
| 23 | Neat cement punning |
| 24 | White washing on old work(one or more coat)with lime to give an even shade. |
| 25 | Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade on old work.(one or more coats) |
| 26 | Applying priming coat with ready mixed grey or pink primer of approved brand & manufacture on wood work(hard & soft wood) |
| 27 | Painting one or more coats on old work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. |
| 28 | Finishing walls with water proofing cement paint of required shade old work (one or more coats applied @2.20Kg/10Sqm.Complete |
| 29 | Demolishing cement concrete including disposal of material within 50 meters lead : 1:3:6 or richer mix |
| 30 | Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 meters lead: |
| 31 | Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar |
| 32 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work) Exposed on wall 25mm dia. nominal bore |
| 33 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end ) 25 mm nominal bore |
| 34 | Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats 15 mm nominal bore |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 36 | Providing and fixing C.I. sluice valves (with cap) complete with Flange, nuts bolts,rubber insertions etc. (the tail pieces if required will be paid separately) :150 mm diameter Class II |
| 37 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 50 mm dia |
| 38 | P/F class Ist. CI non-return valve / foot valve of KIRLOSKAR or UPADHYAYA make or any other make with ISI mark approved by Engineer-in-charge including fabrication and fixing of all fittings, gaskets flanges, nut and bolts etc. complete for proper completion of work, rate shall be inclusive of all materials T&P labour etc. complete. 150 mm diafoot valve |
| 39 | Laying & alignment of 150 to 200mm dia MS pipe over the RCC Pedestal which includes transportation of pipe and its accessoriesat erection site including cutting, grinding as well as its welding , tithtening of coupling, bolt,& nuts, rubber gasket clamp etc.includingtesting commissioning etc. required for proper complition of the work including cost of all labour material, T&P etc. (MS pipe will be issued free of cost to the contractor by the department) |
| 40 | Laying & alignment of 250 to 300mm dia MS pipe over the RCC Pedestal which includes transportation of pipe and its accessoriesat erection site including cutting, grinding as well as its welding , tithtening of coupling, bolt,& nuts, rubber gasket clamp etc.includingtesting commissioning etc. required for proper complition of the work including cost of all labour material, T&P etc. (MS pipe will be issued free of cost to the contractor by the department) |
| 41 | Febrication & erection of MS bend of 250 to 300mm dia as per required angle along T&Pincluding itstransportation , its fixing,welding , including cost of alllabour material, T&P etc. required for proper complition of work.(MS pipe will be issued free of cost to the contractor by the department) |
| 42 | Instalation & Commissioning of Pump with moter on Foundation including transportation of pump with moterincluding cost of all labour material, T&P etc. required for proper complition of work.(Pump with moter will be issued free of cost to the contractor by the department) |
AI Tender Summary
Tender Timeline
Feb 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender