Public Health Engineering Department-PHED has published Construction Of 0.25 Lac Gallons Capacity Underground R.C.C Sump Cum Pump House Stage 2Nd For Wss Jeelpora Bonichakal Under Jjm. Submission Date for this Tender is 07-03-2023. Pump Supply Tenders in Baramulla Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed |
| 3 | All Kinds of soil. |
| 4 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil : |
| 5 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 6 | Providing and laying hand packed stone soling 50 mm nominal size/ stone boulders of size range [5-20cm] in the req. thickness including filling, spreading, dressing,ramming, all leads lifts and all carriages complete. |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone (Using Quarry) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 14 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : |
| 15 | 100 mm dia. Pipe |
| 16 | 150 mm dia. Pipe |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Steel work welded in built up sections Trusses/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 20 | Foundations, footings, bases for columns |
| 21 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 22 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 23 | Suspended floors, roofs, landings, balconies and access platforms. |
| 24 | Columns, pillars, piers, abutments, posts and struts. |
| 25 | Extra for shuttering in circular work: |
| 26 | Foundations, footings, bases of columns etc. |
| 27 | Lintel beams etc., |
| 28 | Suspended Floors |
| 29 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 30 | Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 31 | 100x63x3.2 mm |
| 32 | 75x63x3.2 mm |
| 33 | Providing and fixing ISI marked oxidized M.S. pressed parliamentary hinges with necessary screws etc. complete: |
| 34 | 150x125x27x2.80 mm |
| 35 | 100x125x27x2.80 mm |
| 36 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 37 | Providing and fixing window fasteners with necessary screws etc. complete |
| 38 | Distempering with oil bound washable distemper of approved brand and manufature to give an even shade. New work (two or more coats) over and including priming coat with cement primer. |
| 39 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 40 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work. |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats on new work). |
| 42 | Brick work with F.P.S bricks of class designation 75 in foudation and plinth in cement mortor(1:4) |
| 43 | Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) |
| 44 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):KD/ Silver wood |
| 45 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : KD/ Silver wood |
| 46 | Providng and fixing panelled or panelled and glazed shutters for doors , windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finsihed of required size with necessary screws35mm thick silver wood/K.D |
| 47 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick KD/ Silver wood |
| 48 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 49 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 50 | Providing of PVC pipes for deep holes for seepage extend through the full width of stone masonry (PVC 150mm) |
| 51 | Providing and fixing of electrical points (heating and lighting) including cost of wire switches, necessary MCB"s Switches, Switch boards,Ceiling rose reputed make ISI mark Screws,casing conduit material including all sorts of carriage and labour charges req for the job. |
| 52 | Lighting points |
| 53 | Heating Points |
| 54 | MCB 32-Amp for regulate |
| 55 | Supplying and laying of 4mm service line complete |
| 56 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 57 | Providing and fixing aluminium handlesfor door stopper ISI marked anodised ( anodi coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and sahde with necessary screws etc complete |
| 58 | 125mm size |
| 59 | 100mm size |
| 60 | 200mm L-Drop |
| 61 | Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not lees than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessaryscrews etc complete |
| 62 | 250x10 mm |
| 63 | 150x10mm |
| 64 | 100x10mm |
| 65 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 66 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 67 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washerscomplete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 68 | Providing and fixing of 0.5mm color GS sheet soffit boarding including backing, supports etc., complete |
| 69 | P/F of G.S plain coloured eves boarding of 250 mm wide of standard thickness incl all carraiges upto site of work ( 0.50mm thick ) |
| 70 | Providing and incorporating during concreating G.P strip water seal 0.63 mm nominal thick at construction joint as per proper specification and instruction of Engineer Incharge complete job. |
| 71 | Fabricating/ Manufacturing, providing and fixing MS fittings as required at site for overflow system, intake main, wash out system as required at site including all carraiges as per instruction of Engineer Incharge complete job. |
| 72 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments. |
| 73 | 100 mm dia. Class 1 |
| 74 | 150 mm dia. Class 1 |
| 75 | Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job. |
| 76 | 100 mm dia. pipe |
| 77 | 150 mm dia. pipe |
| 78 | carriage of material from source to site of work by Mechnical Transport including loading unloading and stacking etc. |
| 79 | Cement /Steel max lead 15 Km |
| 80 | Sand max lead 45 Km |
| 81 | Stone aggregate 20mm nominal size max lead 25 Km |
| 82 | Stone aggregate 40mm nominal size max lead 25 Km |
| 83 | Bricks max lead 30 Km |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
