|
| 1 | Loading, Unloading and safe cartage of the following materials from Electricity Store Centre, BALRAMPURto the work site/dump site (Distance up to 70 km) |
| 2 | ST Poles (11 mtr long) |
| 3 | PCC Poles (8.5 mtr long) |
| 4 | 100 KVA T/F |
| 5 | ABC Banch Cable size 3x95+1x70+1x35sq.mm. |
| 6 | A.C.S.R. Weasel Coductor |
| 7 | Sub-Station Base angle |
| 8 | 11 KV X-Arm |
| 9 | 11 X-Arm Holding Clamp |
| 10 | 11 KV Pin Insulator |
| 11 | 11 Pin with nut |
| 12 | 11 KV Disc Insulator |
| 13 | 11 KV Disc fitting |
| 14 | Stay complete with Stay wire & Insulator. |
| 15 | Earthing complete. |
| 16 | Guarding wire |
| 17 | Guarding channel with back clamp & I Ball |
| 18 | Fabrication & Erection of single pole support for 11 KV & L.T. (for proper hight) line on 11 Mtr. Long ST Pole with fixing of necessary clamp & other accessories like 01 no. T-off Channel, Clamp, Danger Board, Nuts & Bolt including electrode earthing, Barbed wire, I-hook clamp, I-hook, Stone pad etc. (All the materials for fabrication shall be arranged by the contractor as per RESSPO norms.) |
| 19 | Fabrication & erection of Double pole support for 11 KV & L.T. (for proper hight) line on 11 Mtr. Long ST Pole with fixing of necessary clamp & other accessories like 01 no. T-off Channel, Clamp, Danger Board, Nuts & Bolt including electrode earthing, Barbed wire, I-hook clamp, I-hook,Stone pad etc. (All the materials for fabrication shall be arranged by the contractor as per RESSPO norms.) |
| 20 | Erection of single PCC Poles (8.5 Mtr Long) for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site |
| 21 | Erection of sectional double pole sectional PCC pole (8.5 mtr long PCC Pole) alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. |
| 22 | Laying, stringing, sagging & binding of conductors of 11 KV in 3 phase, 3 wire line with jumpering (where as required) |
| 23 | Earthing complete of pole as per RESSPO norms(Alongwith fitting of all accessories.). |
| 24 | Erection and Grouting of stay sets alongwith complete fittings. Cement, Sand & Brick ballast provided by the contractor at his own cost. |
| 25 | Grouting of Poles with 1:4:8CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely.All required materials provided by the contractor at his own cost. |
| 26 | Construction of 11/0.4 KV S/S for 100 KVAT/F with mounting and fitting of T/F on plinth/double pole with proper fitting of all acessories and connecting with all circuit including earthing of T/F fitting with all accessories. |
| 27 | Laying, Stringing & Sagging of 3X95+1X70+1x35 sq.mm. ABC Cable up to proper sag. |
| 28 | Cutting of tree branches for cleaning route of 11 KV/LT line at the work site |
| 29 | Construction of masonry plinth of size 1.5x1.5x1.5 mtr. suitable for 250 to 400 KVA capacity of T/F including fixing of rail/joist on plinth. All required materials provided by the contractor at his own cost. |
| 30 | Pale Fencing of transformers by welded MS squaremesh of Size 25x25 m.m. fabricated on MS angles of Size 50x50x6 mm and 40x40x5mm and MS strip having overall dimension & 2.75 metersx2.5 metersx2.5 meters complete with 01 no. gate with provision of hinges roller & locking arrangement, property grouted and painted with one coat of red oxide Primer and two coats of Enamel Paint. |
