|
| 1 | Supply and fix in repair glass tube type rotameter (20- 200 LPM) (F-12000) to measure liquid flow rate or asexist at site of RO Plant 10000 per Hour complete all as specified and directed. Make : Aster/GPC/UKL. |
| 2 | Description all as per ser item No 1.00 above but 40-160 LPM (F-10000) ofor asexist at site RO Plant 10000 per Hour complete all as specified and directed. |
| 3 | Description all as per ser item No 1.00 above but 5000 LPH (F-5000 L) or as existing at site of RO Plant 10000 per Hour complete all as specified and directed. |
| 4 | Supply only the following chemicals for day to day operation and maintenance ofRO plant complete all as specified and directed (Make:Aventura or equivalent as approved.) :- |
| 5 | Sodium Meta Bisulphate. |
| 6 | Anitscalent chemical. |
| 7 | PH Correction chemical |
| 8 | Calcium Hypo chloride granuller type, Grade 1, avilable Chlorine (min) : 65-70 % chlorination of RO water, ISI marked complete all as specified and directed (Make: Aquafit) |
| 9 | Material & Labour for cleaning/ CIP (Cleaning in Proecess) of RO plant using proper authorised chemical for cleaning of membrane complete all as specified and directed Note:(i) Acid cleaning should be performed at a pH of about 2.(ii). Alkaline cleaning is performed at a pH of about 12 (iii) CIP will be done in every two month interval of time OR as per requirement of water quality.(iv) Date of cleaning and due date of cleaning/CIP register to be maintened by the contractor duly signed by contractor,JE(E/M) and AGE(E/M) and to be produced at the time of payment. |
| 10 | Supply and fix in replacement complete with \"O\" rings polypropylene filter 5 micron sediments filter (size-2.5\"X 20\" long) meeting FDA specification complete all as specified and directedMake :Water Net Delux HD 05, Fulflo, XLT, Kemflo Hydranuautic, GE. Note :- Sediment filter to be replaced regularly as & when directed by Engineer-In-charge. |
| 11 | Supply and fix in repair Ball valve/ Butterfly valve/Globe valve / Needle valve/ step control valve/auto pneumatic ball valve/staine or Non return valvemade out of UPVC material standard quality including 12mm SS nut bolts and washer and of size 4 inch all as required at site complete all as specified and dircted for following sizes:-Make : Aster, Golden or equivalent as approved :- |
| 12 | 80 mm dia bore |
| 13 | 50 mm dia bore |
| 14 | 25 mm dia bore |
| 15 | Supply and fix in repair of UPVC bends/elbow of following sizes complete all as specified and directed (Make : Aster, Golden or equivalent as approved) :- |
| 16 | 80 mm dia bore |
| 17 | 50 mm dia bore |
| 18 | 25mm dia bore |
| 19 | Supply and fix in repair of UPVC Tee including union of following sizes complete all as specified and directed (Make : Aster, Supreme) |
| 20 | 80 mm dia bore |
| 21 | 50 mm dia bore |
| 22 | 25 mm dia bore |
| 23 | Supply and fix in repair of UPVC flange inculding rubber gasket and nuts and bolts as per existing of following sizes complete all as specified and directed(Make : Aster, Supreme or equivalent as approved) :- |
| 24 | 80 mm dia bore |
| 25 | 50 mm dia bore |
| 26 | 25 mm dia bore |
| 27 | Supply and fix in repair UPVC pipe line heavy grade of following sizescomplete all as specified and directed (Make : Astral, Supreme or equivalent as approved) :- |
| 28 | 80 mm dia bore |
| 29 | 50 mm dia bore |
| 30 | 25 mm dia bore |
| 31 | Material & labour for preparation of old painted iron surfaces of RO plant by cleaning, scraping and applying two coats of synthetic enamelpaint over a coat of Primer for MS, wooden or iron surface, including necessary markings to show flow of water in RO plant complete all as specified and directed. |
| 32 | Supply and in fix in repair Pressure gauge, Range :0 - 100 Psi,SS bourdon type, 4\", bottom connection 1/4\" BSP(M) incuding necessary fittings required at site complete all as specified and directed. Make : HGURU, Shreeji, Scientific controls. |
| 33 | Supply and fix in repair Pressure gauge, Range :0 - 400 Psi(GF),SS bourdon type, 4\", bottom connection 1/4\"or 3/8\" BSP(M) inculding necessary fittings required at site complete all as specified and directed. Make : HGURU, Shreeji, Scientific controls. |
| 34 | Supply and fix in repairs Pressure switchof range 0.1 to 2 Kg/Sqcm complete all as specified and directedMake Indfos Model B424B or equivalent |
| 35 | Supply only chlorine test kit with Orthodoline solution bottle in 500ml for chlorine testing complete all as specified and directedMake : Glaxo/Aqua or its equivalent |
| 36 | Disconnecting and taking out existing vertical type high pressure motor pump set of 7.5 HP electric driven 3 phase 415 voltincluding Re-fixing in the same position after repair complete all as specified and directedNote- Rewinding of motor will be measured and paid under respective item. |
| 37 | Rewinding of 7.5 HP vertical type high pressure pump centrifugal pump (Motor) 3 phase 415 voltwith super emamelled copper rewinding wire of suitable size/gauge for standard rpm and providing insulation including taking out the existing winding, varnishing, heating, replacement of suitable bearing, seals, gaskets etc complete testing including all other required parts complete all as specified and directed |
| 38 | Servicing of 7.5 HP vertical type high pressure pump centrifugal pumpwith replacing of existing type impeller, greasing, pump bearing, gland packing / dori etc, complete testing including all other required parts such as nut bolts, coupler etc complete all as specified and directed |
| 39 | Taking out existing 5 HP feed motor pump outside incoming well at RO plant after disconnecting it from existing pipe and servicing and overhauling it by opening it on site/greasing it including replacing worn out Packing, gland packing and gland plate, nuts bolts and washers, studs, existing bearing of pump and motors etc complete making it smooth functional and testing and refixing itwith necessary fittings required for connecting it with pipe line complete all as specified and directed |
| 40 | Servicing of 5 HP vertical type high pressure pump centrifugal pumpwith replacing of existing type impeller, greasing, pump bearing, gland packing / dori etc, complete testing including all other required parts such as nut bolts, coupler etc complete all as specified and directed |
| 41 | Taking out existing 2 HP submersible motor pump from main incoming well at RO plant after disconnecting it from existing pipe and servicing it including rewinding and replacing worn out parts complete making it functional and testing and refixing it inside the sump with necessary fittings required for connecting it with pipe line complete all as specified and directed |
| 42 | M&L for repairing and servicing of leakages at flanges at various joints such as near pressure guage, motor, pipes and at various location inside RO Plant premises by means of opening from joint and replacing flanges and PVC pipes of required size and length complete with teflon tape, gasket and other accessories complete clearing of leakage all as specified and directedNote: (a) Complete clearing of leakage at various locations of plant as directed by Engineer-in-Charge will be considered as one job (b) Any spares other then flanges or teflon tape/ packings/gaskets etc will be measured and paid under respective item. |
| 43 | Supply and Fix End Pressure plates of each side of Membranes sleeve(Pressure Vessel of Size: 8\" dia x 200\" long) at RO Darjipura to avoid complete leakage of pressure vessel complete all as specified and directedMake: GE, Aventura or equivalent.Note: All the connected accessories required for replacing the end plates are deemed to be considerd as part of job and will be considered included in quoted rates. |
| 44 | M & L for opening and cleaning of Dual Media Filter and replacement of following components complete all as specified and directed (At Darjipura RO Plant).(a) 25 to 40mm Gravels- 750 Kg(b) 7 to 15 mm Gravels- 325Kg(c) 3 to 7 mm Gravels-325Kg(d) 1 to 3 mm Crushed quartz Sand-325Kg(e) Sand-325 Kg(f) Activated Carbon (900IV Carbon 4X8mm coconut shell)- 250 KgNote: Welding cutting for opening of filter media is deemed to be included with unit rate of item. |
| 45 | Supply, Installation Testing & Commissioning in repairs of solenoid valve suitable for 15 mm GI pipe for Air releasing of pump including 15 mm. gate / ball valve with necessary GI fittings with following specifications complete all as specified and directed:- Size: 15 mmMaterial: SS/ Forged BrassType: Pilot operated, diaphragm type / direct acting type.Pressure rating: 4 kg / sq. cm.Normally closedMake: AVCON/ROTEX/ASCO/JOHNSON CONTROLS. |
| 46 | M & L for Removing, cleaning, greasing to wear and tear parts, servicing and overhauling for digital level sensorsand reconnecting the same complete all as specified and directed |
| 47 | M & L for Removing, cleaning, greasing to wear and tear parts, servicing and overhauling for solenoid valve and reconnecting the same complete all as specified and directed |
| 48 | M & L for Removing, cleaning, greasing to wear and tear parts, servicing and overhauling for motorised actuator valves of size 100mm/150mm/200mm and reconnecting the same complete all as specified and directed |
| 49 | Supply and fix in repairs flat 4 Sqmm 3 Core flexible copper cable for submersible pump at RO plant ISI marked complete all as specified and directed.Make: Polycab, Havells, Finolex |
| 50 | Supply and fix UPVC heavy grade spears up to3\"336-030 SCH 40 WA1Q2/V2 complete all as specified and directed.Make: Supreme or equivalent |
| 51 | Detecting fault /defective component of existingof U/S water supply automation system installed atMain pump house darjipura,as required of all parts of systemviz. (a)PLC (Programmable Logic Controller) for master and slave communication having sufficient digital input and out put based, (b)GPRS Modem with antenna, power supply and patch cord.(c)HMI (Human Machine Interface) of 7 Inch size with 1 no. MODBUS port,serial port and LAN portcontrol panels.(d) electric motor suitable 100 mm dia butterfly valve as per existing sample/ size (e) electric motor suitable 150 mm dia. butterfly valve as per existing sample/ size (f) hooter alarm having 24 V DC power operation.(g) 100 mm and 150mm dia, single phase, Motor Actuated Butterfly valve with disc material etc and replacement of defective component of Electronics component , updated theprogramming and replacement of all U/s moving componentincluding carrying out complete overhauling ,maintenance/repairs and making serviceable of the system replacement of unserviceable parts,if anyproject completionand trouble shooting responsibility also lies with contractor including following provisions complete all as specified and directed. |
| 52 | Notes:-(i) Replacement of defective control wiring, small part such as Push button, lugs any auxilary contatct,auto selctor switch etcand necessary servicing repair by expert technician . (ii)The scope of work includes the labour charges required for removing, repairing, refixing, carrying out electrical termination, electronic components,moving component such as butterflyvalve , motors, power contactor, contol CT, MCBs/MCCB and fixing/installing/testing and commissioning the complete system.(iii) a)PLC (Programmable Logic Controller) for master and slave communication having sufficient digital input and out put based.(b)GPRS Modem with antenna, power supply and patch cord.(c)HMI (Human Machine Interface) of 7 Inch size with 1 no.MODBUS port, serial port and LAN port control panels.(d) electric motor suitable 100 mm dia butterfly valve as per existing sample/ size (e) electric motor suitable 150 mm dia. butterfly valve as per existing sample/ size (f) hooter alarm having 24 V DC power operation.(g) 100 mm and 150mm dia,single phase, Motor Actuated Butterfly valve with disc material etc shall be measured and paid saperatly |
| 53 | Supply and fixing in replacement of electric motor suitable 200 mm dia. butterfly valve as per exiting sample/ size complete all as specified and directed Make: Marsh/SD TORK/SM INSTRUEMNTATION |
| 54 | Supply and fixing in replacement of electric motor suitable 100 mm dia. butterfly valve as per exiting sample/ size complete all as specified and directed Make: Marsh/SD TORK/SM INSTRUEMNTATION |
| 55 | Supply, Installation, Testing and Commissioning in repairs of limit switch having 1 NO/NC. 230 V. 6AMP complete all as specified and directed Make: CHERRY/ L & T/ SIEMENS/C & S. |
| 56 | Supply, Installation, Testing and Commissioning in repairs of Resistor/ Capacitor suitable for 80mm/ 100mm/ 150mm/ 200mm size electrical actuator complete all as specified and directed |
| 57 | Supply Installation testing and commissioning of PLC (Programmable Logic Controller) for master and slave communication having sufficient digital input and output all as persame I/O’s and same model as existing on the site complete all as specified and directed. Make: Mitsubishi/ Unitronics/Allen Bradley/Siemens. |
| 58 | Supply, Installation, Testing and Commissioning of Hand wheel suitable for 80mm/100mm/150mm/200mm size electrical actuator motor complete all as specified and directed |
| 59 | Reprogramming testing and commissioning of the PLC’s of all PLC panels for GPRS communication for master –slave communication according to existing control logicor as per existing control philosophy & as per site requirement complete all as specified and directed |
| 60 | Communication charges of GSM sim cards for an year for master-slave communication between main control panel & control panels located at remote stations including Supply Installation testing and commissioning of GPRS Modem with antenna, power supply and patch cord complete all as specified and directed Make: Maestro/ MCOM Technologies/ Sheetal wireless Or equivalent. . (charges for 12 months) |
| 61 | Supply and fix in repair Gun metal Globe valve with SS stud andSS nut bolts of appropriate size for fixing of following sizes complete all as specified and directed (Make : Zolato, Kartar, Indo or equivalent as approved) :- |
| 62 | 50 mm dia bore |
| 63 | 25 mm dia bore |
| 64 | M&L for repair and replacement of acrylic sheet of automation panel fixed inside pump house at darjipura and complete maintenance and replacement of LED lights inside distribution scheme panel complete cleaning and making it functional complete all as specified and directed |
| 65 | M & L for cleaning and scraping the surface/walls of filter media and CIP tank, SS filter tank and SS heater unit complete and painting the plant other then pipes complete with proper coded colour as per the instruction of Engr-In-Charge all as specified and directed Make: Asian Paint, Berger. Note: Complete cleaning and painting of individual units at RO Plant will be part of quoted rates and will be considered under one job. |
| 66 | M & L for cleaning and scraping the surface/walls of RO Plant Shutter complete and painting with silver colour (two coat) from inside and outside including greasing the moving part for proper working of shutter complete and plastering of damaged wallas per the instruction of Engr-In-Charge all as specified and directed Make: Asian Paint, Berger. |
| 67 | S & F in replacement RO membrane module to deliver for 1000 ltr per hour output of treated water 8040 element , designed pressure of 600 psi incl testing after complention and taking out old unserviceable membrane complete all as specified and directed.Make- DOW / Hydronautic /koch U.S.A. |
| 68 | Maintenance and servicing of self priming dosingequipments, having discharge capacity upto 4 Ltr /Hrsto 10 ltr/ hrs of any make per month Including dismentling the dosing equipment from existing place,cleaning the traces of chlorine/chemical used and refixing / reassambling all parts after complete cleaning and fixing at same location and making the plant fully in serviceable condition at the following locations complete all as specified and directed:- Note : (i)Spares required for replacement will be measured and paid separately under respective items of this schedule. (ii)The rate quoted by the tenderer includes cost of maint/servicing of above said plant fora period of 30 days during contract period till the date of completion of work specified. |
| 69 | At RO plant Darjipura |
| 70 | Main pump house Darjipura |
| 71 | MAP Pump house Darjipura |
| 72 | Supply only PVC diaphargm suitable for existing dosing pump at site (Any Size) complete all as specified and directed. |
| 73 | Supply only PVC pipe of suitable size (thick material) for dosing pump as per site complete all as specified and directed. |
| 74 | Supply only injection type Non Return valve suitable for dosing unit as per site complete all as specified and directed. |
| 75 | Supply only PVC container/tank (heavy duty) 100 ltr capacity complete all as specified and directed.Make: Sintex |
| 76 | M & L for testing of water sample at authorised government laboratory for biological fitness of water on bimonthly basis including glass bottle for collection of sample complete all as specified and directed.Note: (a) Sample of water to be collected from the place/area as directed by Engineer-in-Charge and will be responsibility of contractor. (Water sample areas includes such as swimming pool, borewell, RO Plant, STP (Pre and Post), pump house)(b) Collection of sample from all the places at a time will be considered as one job each time. |
| 77 | Supply and fix in repair On/Off switches, with NC connector and connectingup complete all as specified and directed Make Vaishno type-2 x VALSTR or equivalent. |
| 78 | Supply and fix in repair Indicating LED lamp indicator, having input 230 V, output 130V connecting up complete all as specified and directed Make :Vaishno type-2 XVILR or equivalent. |
| 79 | Supply and fix in repair Kit kat fuse upto 40A and connecting up complete all as specified and directed Make: Siemens 3NW20NNSF or equivalent of L&T / ABB / Havells. |
| 80 | Supply and fix in repair MCB triple pole, 5to 30 Amp, 415 V, 10 KA rating complete all as specified and directedMake: Siemens or equivalent of L&T / ABB / Legrand. |
| 81 | Supply and fix Air break power contractor AC operated, upto 25A, AC3 as per IS 13947 with auxillary contact arrangement and over load relay complete set and connecting up suitable for 5 to 20 HP water pump complete all as specified and directedMake:-Siemens or equivalent of CG / L&T / C&S. |
| 82 | Supply and fix in repair Heavy duty switch disconnector fuse assembly, with fuse links, 50A complete as per IS 13947-3 and connecting up complete all as specified and directed Make: Siemens model no 3KL49-30-1YA00 or equivalent of L&T / ABB |
| 83 | Supply of water through tanker/bouser for domestic use including transportation from source to U/G sump Darjipura AFS Baroda. The water should have the following main factors complete all as specified and directed :- (a) Water should be clear and free from all suspended matters both Hygenic & inorganic matter. (b) Water should be free from taste and odour. (c) Water should be colour less and no vegetable stain should be present.(d) Water should be soft that it should not contain dissolved impurities like calcium or magnesium bicarbonate and Sulphates.(e) Water should be soft and should be free from all pathogenic organism causing diseases. (f) Copy of gate entry at guard room with vehicle No date and time shall be submitted duly defaced by Engr in charge before claiming payment. Note : Water analysis duly tested by authorised lab will be rendered by supplier before supplying the water. |
| 84 | M &L in repair of PVC insulated and PVC sheathed cable copper conductor 4 Sqmm 3 core superior quality complete all as specified and directed. |
| 85 | M&L for removal of existing materials in Quartz sand filter such as silica sand(0.35mm-0.60mm), pabbels(0.6mm-1.0mm) of various size and supply and lay all fresh materials such silica sand, pabbels of size 1 to 3mm, 3 to 7mm and various size as per site and all as specified and directedNote: (i) Replacement of materials of quartz filter shall be done by proper authorised/registerd supplier. Make: UV Rich or equivalent. (ii) Contractor shall remain responsible for proper quality of filtered water for next one year. If filter found not working properly, the work to be redone by contractor without any extra cost. |
| 86 | Supply only Calcium Hypochlorite Granular (TCC-90 ) for chlorination of swimming Pool, ISI marked complete all as specified and directed.. |
| 87 | Supply only alum for day to day filtration of water of swimming Pool, confirming to the relevent ISI marked complete all as specified and directed. |
| 88 | Supply only copper sulphate for pool water, confirming to the releventISI marked complete all as specified and directed. |
| 89 | Supply only hydro chloric acid LR type suitable for swimming pool water complete all as specified and directd. |
| 90 | Supply only Nylon rope for Pool cleaner size of 20 mm dia, ISI marked complete all as specified and directed.. |
| 91 | S & F Suction/ deliverypipe (heavy duty) of size 50 mm dia for Pool cleaner, ISI marked complete all as specified and directed.. |
| 92 | Supply and fix in repairs fiber brush for suction sweeper of suitable size as per site for cleaning of swimming pool complete all as specified and directed . Make-: UV Rich or equivalent.make approved by GE |
| 93 | Supply only soda ash in swimming pool water treatment to acchive dezire PH value for water complete all as specified and directed . |
| 94 | Supply and fix gun metal globe and checkdiaphragm valve (as per Existing model) for water supply purpose withdrilled flanged ends (internal cast 50mm boreconforming to IS 778/1980 marked Class-Iwith stainless steel spindle and iron wheel incl jointing material compete such as rubber packing of adequate size and requisite number of nuts, bolts and washers complete all as specified and directed .Make:-KIRLOSKAR/LEADER/AUDCO |
| 95 | Supply and replace of net with frame and handle structure ISI marked complete for picking up floating leaves and small insects complete all as specified and directed. |
| 96 | Material and labour for cleaning of water by means of muratic acid or PH booster(cristal bright solution) to maintain the PH of water at desired level and by using chlorine or whatever is required to maintain the pool water upto the approval of user and MES requirement of quality of water complete all as specified and directed. |
| 97 | M & L for preparation/cleaning of old painted steel surfaces of any description such as suction line, delivery line, priming line, valves and Quartz sand filter complete with scraping out old painted surface and after that marking of flow direction along with two coats of synthetic enamelpainting complete all as specified and directed . |
| 98 | Supply and fix in repair of pressure guage, range 0-100 PSI SS bourdon type 4\", bottom connection 1/4\" or 3/8\" BSP(M) complete as in repairs complete all as specified and directed. |
| 99 | M&L for repairing and servicing of leakages/blockage at flanges at various joints such as near pressure guage, motor, pipes and at various location inside Swimming pool plant premises by means of opening from joint and replacing flanges of required size and length complete with teflon tape and other accessories complete clearing of leakage complete all as specified and directed.Note: (i) Complete clearing of leakage at various locations of plant shall be considered under one job. (ii)Any spares other then flanges or teflon tape/ packings/gaskets etc shall be measured and paid under respective item. |
| 100 | Supply and fix in replacement of CIfoot valve ISI marked of size 80 mm dia for under ground sump suction CI/ GIline including nipple of suitable size, welding, connection and testing complete all as specified and as directed. |
| 101 | Disconnecting unbolting and taking out existing monoblock pump set of 7.5 HP capacity, electric driven 3 phase 415volt including Re-fixing in the same position after repair with necessary screw and bolts complete all as specified and directed. |
| 102 | Rewinding of 7.5 HP centrifugal pump (Motor) 3 phase 415 voltwith super enamelled copper rewinding wire of suitable size/gauge and providing insulation including taking out the existing winding, varnishing, heating, testing complete all as required for completion of job complete all as specified and directed. |
| 103 | Supply and fix in repair of following parts for existing centrifugal pump set electric driven 3 phase 415 volt 7.5 HP having discharge 60000 LPH complete all as specified and directed. |
| 104 | Motor cooling fan of existing make |
| 105 | Pump motor MS coupling |
| 106 | Cover bolts & washers |
| 107 | Pump bearing Make : SKF/UBC/TATA/FAG/ NBC |
| 108 | CI impellar suitable for existingpump set. |
| 109 | SS Sleeve (Gland Sleeve) |
| 110 | Pump shaft with studs and nuts for pump body. |
| 111 | Starter relay Make- L&T/SIEMENS or equivalent.make approved by GE |
| 112 | Magnet coil |
| 113 | Motor bearing Make : SKF/UBC/TATA/FAG/ NBC |
| 114 | Contactorfor starter. Make- Havells/L&Tor equivalent.make approved by GE |
| 115 | Supply of PH meter degital type, long life battery backup, plastic body, instunt result displaier for day to day water PH testing complete all as specified and directed. |
| 116 | Material and labour for surface dressing of vegetated and under growth materials surrounding area ofinstallation of darjipuraarea complete all as specified and directed |
| 117 | M & L for Plain cement concrete 1:3:6 (nominal mix) type C-2(using 40mm graded crushed stone aggregates) as in foundation for tarmac light platform of 1 mtr height and mass concrete for staycomplete all as specified and directed. |
| 118 | M & L for Plain cement concrete 1:2:4 ( nominal mix ) type B-1 (using 20 mm graded crushed stone aggregates) as incopings andthe like including weathering, slightly rounded or chamfered angles and throatingincluding necessary formwork where required complete all as specified and directed. |
| 119 | M & L for Loose filling and spreading of aggregates of gauge fo 40mm at installlation area, below GOD, Panels etc complete all as specified and directed |
