|
| 1 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area . MORTH 201 |
| 2 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. MORTH 309, 2.18 |
| 3 | Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, not less than 97% of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with Power roller. MORTH 305, 2.24 |
| 4 | Supplying soft murum at the road site, including conveying and stacking complete. MORTH 408, 2.29b |
| 5 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. MORTH 408, 2.30 |
| 6 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. MORTH 408, 2.31 |
| 7 | Providing,laying, spreading and compacting stone aggregatesof specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to propergradeandcamber,applyingandbroomingrequisitetypeofscreening/binding Materialstofilluptheintersticesofcoarseaggregate,wateringandcompactingwith vibratoryrollertotherequireddensity.ByMechanicalMeans-Grading I (Using Screening Type B (11.2 mm) Aggregate) MORTH 404, 3.19 |
| 8 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading II(Using Screening Type B (11.2 mm) Aggregate) MORTH 404, 3.20 |
| 9 | Providing and constructing 50 mm. thick ModifiedPenetrationMacadam (MPM)road surfaceincludingallmataerials,preparingtheexistingroadsurface,spreading40mm. stonemetallayers100%crusherbrokenmetalwithconicalcrusherplantheatingand sprayingthe [email protected]/sqm,spreading12mm.sizechips compacting withstatic roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506etc. complete.Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) IRC-SP-20, 2002, Clause No. 8.7.3, MORTH 505, 3.37b |
| 10 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) MORTH 503, 3.30 |
| 11 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of13.2mm to5.6mm aggregatespremixed withbituminousbindertransported tosite with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Sealcoat.ForBitumenofspecifiedgrade--USINGdrummixtypehotmixplantwith SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) MORTH 510, 4.12 |
| 12 | Providing and laying of Type - B premix seal coat with HMP of appropratecrushed stone chipping6.70 mm size and penetration bitumen of specified grade @ 0.68 Kg / Sqm. , preparing existing road surface including mixing in suitable Batch Mixplant and rolling bystatic roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates areconsidered to arrive at rates) MORTH 511, 4.03 |
| 13 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge. MORTH 801, 6.36 |
