Himachal Pradesh Forest Dept-HPFD has published Tender For Construction Of Pheasant Pens At Himalayan Nature Park Kufri Under Willife Range Kufri And Wildlife Division Shimla. Submission Date for this Tender is 06-03-2023. Birds and Fowl Tenders in Shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30cm in depth but exceeding1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earh upto 50 m and lift upto 1.5 m, as directed by engineer in charge :- all kind if soil .Plot levelling and cutting for underground ground welded mesh bedding in the open area of pens |
| 2 | Earth in excavation by mechanical means (Hydraulic excavator)/manual meansin foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lifts upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:4:8 (1Cement:4 coarse sand:8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Random rubble masonary with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1Cement:6 Sand : 12 coarse aggrigate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | 15mm cement plaster on the rough side of single or half brick wall of mix :-1:6 (1 Cement : 6 fine sand) |
| 8 | 12 mm cement plaster on fair side of single half brick wall mix:-1:6(1cement:6 fine sand ) |
| 9 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 10 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 11 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 12 | Providing and fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 13 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece |
| 14 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required .In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 15 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 12x12 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 16 | Providing and fixing ISI marked, IS 1341 M.S. heavy weight butt hinges with necessary screws etc. complete: 75 x 60 x 3.10 mm |
| 17 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 250 x 10 mm |
| 18 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 100 mm |
| 19 | Painting steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coats applied @ 0.90 ltr/10sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. |
| 20 | Providing and fixing precoated galvanised iron profile sheet (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm(+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 x 55 mm) with EPMD seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafter and trusses and including cutting to size and shape wherever required. |
| 21 | Excavating, supplying and filling of local earth (including royality) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete |
| 22 | Supplying and fixing chicken mesh embedded in concrete layer as per the direction of engineer in charge |
| 23 | Dry stone pitching 22.5 cm thick including supplying of stone and preparing surface complete. |
| 24 | Providing and fixing 1 mm thick M.S.sheet sliding shutter, with frames and diagonal braces of 40 x 40 x 6 mm angle iron, 3mm M.S.gusset plates at the junction and corners, 25 mm dia pulley, 40 x 40 x 6 mm angle and T iron guide at the top and bottom respectively, including applying a primming coat of approved steel primer. |
| 25 | Providing and fixing polycarbonated transparent sheet 1.20 mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpe and bitumen rubber washer complete with all accessories as required as per direction of Engineer in charge. |
| 26 | Providing and applyingwhite cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Providing and fixing M.S.B.P. Sheet 2.00 mm thick in eaves board / facia / soffits ceiling includng cutting, fixing and welding to steel roof member and applying a coat of red lead primer ( Base Member of steel work shall be measured and paid for seperately) with scaffolding work including carriage of material within all leads and lifts as per direction of engineer in charge. |
| 28 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of planation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm. As per IS :277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have provective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by the Engineer-in-charge.The sheet shall be fixed using self drilling/ self tapping screws of size (5.5 x 55 mm) with EPMD seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafter and trusses and including cutting to size and shape wherever required. |
| 29 | Steel work in built up tabular ( round, square or rectangular hollow tubes etc.)trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shades washers etc. complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
