Tender For Fabrication And Installation Of O4 Nos Of Scouring Sluice Gate And 02 Nos Of H.R Gate Of Jammanalla From 00M To 4800M Outfall To Ghodahada River Under Digapahandi Constituency Of Ganjam District In Doab-Xvii.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Mar 2023
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
digapahandi → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Fabrication And Installation Of O4 Nos Of Scouring Sluice Gate And 02 Nos Of H.R Gate Of Jammanalla From 00M To 4800M Outfall To Ghodahada River Under Digapahandi Constituency Of Ganjam District In Doab-Xvii.
BOQ
| Sl. No. | Item Description |
| 1 | EMBEDDED PARTS (SET-A): Supply of steel material for M.S Wall liner to fabricate 8mm thick plate of size 0.20mx0.47m=06nos, bottom seal beam ½ cut ISMB 200 of length 2.1m with Supply of stainless steel plate to fabricate 6mm thick SS plate of Sill beam SS seat size 0.08m x 1.9m,SS track plate size 0.14m x 3.0m welded over wall liner andover bottom channel with 1st stage embedment, studs, nuts, bolts, washer etc as per direction by the Engineer-in-charge including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 2 | EMBEDDED PARTS(SET-B) : Supply of steel material for M.S Wall liner to fabricate 8mm thick plate of size 115mmx1.2m=04nos and 150mm x 1.20 mtr=02nos, bottom seal beam ½ cut ISMB 200 of length 0.75m with Supply of stainless steel plate to fabricate 5mm & 6mm thick SS plate of Sill beam SS seat size 0.05m x 0.6m, side seal SS seat size 0.08m x 1.2m welded over bottom channelandover wall liner respectivelly with 1st stage embedment, studs, nuts, bolts, washer etc as per direction by the Engineer-in-charge including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 3 | EMBEDDED PARTS(SET-C) : Supply of steel material for M.S Wall liner to fabricate 8mm thick plate of size 115mmx1.2m=04nos and 140mm x 1.20 mtr=02nos, bottom seal beam ½ cut ISMB 200 of length 0.85m with Supply of stainless steel plate to fabricate 5mm & 6mm thick SS plate of Sill beam SS seat size 0.7m x 0.05m, side seal SS seat size 0.08m x 1.2m welded over bottom channel andover wall liner respectivellywith 1st stage embedment, studs, nuts, bolts, washer etc as per direction by the Engineer-in-charge including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 4 | GATE LEAF (SET-A) :Supply & fabrication of Vertical lift sliding gate leaf size : 1.80m x 1.50m consisting of skin plate horizontal girder Size : ISMB150 of size 1.725m=03nos , End vertical girderSize : 1495x150x10mm=02nos, stiffeners , seal flats, lifting brackets, pad base, Bottom seal, C/S Screw, bolt/ nut etc.with all accessories including machinery, fixture, labour, cutting, aligning, welding, cleaning, finishing including consumables all complete as per specification with lead & lifts excluding bought out items complete in all respect as per direction by Engineer-in-Charge. including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 5 | GATE LEAF (SET-B) :Supply & fabrication of Vertical lift sliding gate leaf size : 0.55m x 0.50m consisting of skin plate horizontal girder Angle Size : 50x50x6ISA , End vertical girderSize : 0.01 x0.495m, stiffeners , seal flats, lifting brackets, pad base, Bottom seal, C/S Screw, bolt/ nut etc.with all accessories including machinery, fixture, labour, cutting, aligning, welding, cleaning, finishing including consumables all complete as per specification with lead & lifts excluding bought out items complete in all respect as per direction by Engineer-in-Charge. including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 6 | GATE LEAF SET-C :Supply & fabrication of Vertical lift sliding gate leaf size : 0.65m x 0.60m consisting of skin plate horizontal girder Angle Size : 50x50x6ISA , End vertical girderSize : 0.01m x 0.595m, stiffeners , seal flats, lifting brackets, pad base, Bottom seal, C/S Screw, bolt/ nut etc.with all accessories including machinery, fixture, labour, cutting, aligning, welding, cleaning, finishing including consumables all complete as per specification with lead & lifts excluding bought out items complete in all respect as per direction by Engineer-in-Charge. including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 7 | STEEL HOISTING BRIDGE SET-A : Supply & Fabrication of steel Hoist bridge for single stem nut type screw gear box hoist consisting of supporting beams size 65X65X5ISA of 2.0m.,base plates size : 12mm thick plate 0.40m x 0.20m, anchor Bar with all accessories including machinery, fixture, labour, cutting, aligning, welding, hand Railings, cleaning, finishing including consumables all complete as per specification lead & lifts excluding bought out items in all respect as per direction by Engineer-in-Charge. including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 8 | STEEL HOISTING BRIDGE SET-B: Supply & Fabrication of steel Hoist bridge for single stem nut type screw gear box hoist consisting of Main beams size 150 ISMB 1.2m.,base plates size : 12mm thick plate 0.40m x 0.20m, anchor Bar with all accessories including machinery, fixture, labour, cutting, aligning, welding, hand Railings, cleaning, finishing including consumables all complete as per specification lead & lifts excluding bought out items in all respect as per direction by Engineer-in-Charge. including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 9 | STEEL HOISTING BRIDGE SET-C : Supply & Fabrication of steel Hoist bridge for single stem nut type screw gear box hoist consisting of Main beams size 150 ISMB 1.2m.,base plates size : 12mm thick plate 0.40m x 0.20m, anchor Bar with all accessories including machinery, fixture, labour, cutting, aligning, welding, hand Railings, cleaning, finishing including consumables all complete as per specification lead & lifts excluding bought out items in all respect as per direction by Engineer-in-Charge. including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 10 | ERECTION CHARGES Set-A : Erection, Positioning, aligning, fixing, trial & commissioning including unloading & shifting upto location of all components 1st stage & 2nd stage embedded parts (consisting of sill beam, wall liners, track plates etc.), Vertical Gate leaf ( Complete assembly), Steel hoist bridge assembly ( consisting of hoist platform, screw rod, lifting gear box. supporting beams, base plates etc.) with all accessories including machinery, fixture, labour, cutting, aligning, welding, cleaning, finishing including consumables all complete as per specification & lifts : - including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 11 | ERECTION CHARGES Set-B : Erection, Positioning, aligning, fixing, trial & commissioning including unloading & shifting upto location of all components 1st stage & 2nd stage embedded parts (consisting of sill beam, wall liners, track plates etc.), Vertical Gate leaf ( Complete assembly), Steel hoist bridge assembly ( consisting of hoist platform, screw rod, lifting gear box. supporting beams, base plates etc.) with all accessories including machinery, fixture, labour, cutting, aligning, welding, cleaning, finishing including consumables all complete as per specification & lifts : - including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 12 | ERECTION CHARGES Set-C : Erection, Positioning, aligning, fixing, trial & commissioning including unloading & shifting upto location of all components 1st stage & 2nd stage embedded parts (consisting of sill beam, wall liners, track plates etc.), Vertical Gate leaf ( Complete assembly), Steel hoist bridge assembly ( consisting of hoist platform, screw rod, lifting gear box. supporting beams, base plates etc.) with all accessories including machinery, fixture, labour, cutting, aligning, welding, cleaning, finishing including consumables all complete as per specification & lifts : - including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 13 | PAINTING : -Set-APainting of all structural components including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 nmicron thick & three coats of final paint of 100 micron each, all inclusive of labour, materials & consumables as per relevant IS code specification & with all lead & lift in all respect as per direction by Engineer-in-Charge.: including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 14 | PAINTING : -Set-BPainting of all structural components including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 nmicron thick & three coats of final paint of 100 micron each, all inclusive of labour, materials & consumables as per relevant IS code specification & with all lead & lift in all respect as per direction by Engineer-in-Charge.: including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 15 | PAINTING : -Set-CPainting of all structural components including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 nmicron thick & three coats of final paint of 100 micron each, all inclusive of labour, materials & consumables as per relevant IS code specification & with all lead & lift in all respect as per direction by Engineer-in-Charge.: including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 16 | BOUGHT OUT ITEMS Set-A : -i) Bolts, Nuts Studs, washers etc.= 46kgii) Bronze pad = 04 nosiii) Lifting pin = 01no.iv) Bottom Rubber seal = 1.600mv) Ø 32 Side seal= 3.000mvi) Anchor bars = 16nosvii) Ø 63 Screw rod with sq. thread= 2.1mtrviii) Ø 63 round = 1.2mtrix) Nut type Screw Gear box assembly suitably square threaded for 63mm dia screw rod all inclusive of cost of material, cost of Thrust bearing, machining and assembly charges. = 01 setx) Operating handle = 02noxi) Grease & Gear oil etc.= 03kgxii) Stainless steel flat = 54.67kgxiii) Stainless steel electrode= 229nosincluding contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 17 | BOUGHT OUT ITEMS Set-B : -i) Bolts, Nuts Studs, washers etc.= 26kgii) Bronze pad = 04 nosiii) Lifting pin = 01no.iv) Bottom Rubber seal = 0.550mv) Ø 32 Side seal/Top seal = 1.000m/0.550mvi) Anchor bars = 16nosvii) Ø 63 Screw rod with sq. thread= 1.0mtrviii) Ø 63 round = 0.5mtrix) Nut type Screw Gear box assembly suitably square threaded for 63mm dia screw rod all inclusive of cost of material, cost of Thrust bearing, machining and assembly charges. = 01 setx) Operating handle = 02noxi) Grease & Gear oil etc.= 05kgxii) Stainless steel flat = 22.54kgxiii) Stainless steel electrode= 92nosincluding contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 18 | BOUGHT OUT ITEMS (Set-C) : -i) Bolts, Nuts Studs, washers etc.= 26kgii) Bronze pad = 04 nosiii) Lifting pin = 01no.iv) Bottom Rubber seal = 0.490mv) Ø 25 Side seal/Top seal = 1.320m/0.490mvi) Anchor bars = 16nosvii) Ø 63 Screw rod with sq. thread= 1.0mtrviii) Ø 63 round = (0.5mtr)ix) Nut type Screw Gear box assembly suitably square threaded for 63mm dia screw rod all inclusive of cost of material, cost of Thrust bearing, machining and assembly charges. = 01 setx) Operating handle = 01noxi) Grease & Gear oil etc.= 03kgxii) Stainless steel flat = 22.77kgxiii) Stainless steel electrode= 100nosincluding contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 19 | Extra Items (Set-A):- i) Concrete cutting= 2.00m3ii) 2nd stage concreting= 0.5m3including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 20 | Extra Items (Set-B & C):- i) Concrete cutting= 0.10m3ii) 2nd stage concreting= 0.200m3including contractor [email protected]%, over Head Charges @ 4% and labour cess@1% |
| 21 | Transportation Transportation of above said half finished materials from workshop, generator welding transformer derrick & other T & p workshop to worksite around 110km to & fro and including labour cess@1% |
AI Tender Summary
Tender Timeline
Feb 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender