|
| 1 | Compressor | suitable for Pressure8 barDelivery 50 lpm or more Reservoir capacity 24 Litres or more 230V 50 Hz with pressure regulator and water separator |
| 2 | Pneumatic Trainer Kit each consisting of the following matching components and accessories | As per ncvt norms |
| 3 | Single acting cylinder | Max stroke length 50 mm Bore dia 20 mm |
| 4 | Double acting cylinder | Max. stroke length 100 mm Bore dia 20 mm magnetic type |
| 5 | 3 by 2 way valve | manually actuatedrmally Closed |
| 6 | 3 by 2 way valve | pneumatically-actuatedspring return |
| 7 | One way flow control valve | As per ncvt norms |
| 8 | 5 by 2 way valve | with manually operated switch |
| 9 | 5 by 2 way valve | pneumatically actuatedspring return |
| 10 | 5 by 2 way pneumatic actuated valve | double pilot |
| 11 | 3 by 2 way roller lever valve | direct actuation rmally Closed |
| 12 | Shuttle valve OR | As per ncvt norms |
| 13 | Two pressure valve AND | As per ncvt norms |
| 14 | Pressure gauge | 0 to16 bar |
| 15 | Manifold with self closing | NRV 6 way |
| 16 | Pushbutton station for electrical signal input | with 3 illuminated momentary contact switches 1+ 1 NC and 1 illuminated maintainedcontact switch 1+ 1 NC Contact load 2A |
| 17 | Relay station | with 3 relayswith 4 contact3+1NC or Change-over type5 A |
| 18 | 3 by 2 way single soleid valve | with LED |
| 19 | 5 by 2 way single soleid valve | with manual override and LED |
| 20 | 5 by 2way double solid valve | with manual override and LED |
| 21 | Power supply unit | Input voltage 85 to 265 V AC Output voltage 24 V DC Output current max 4 A short circuit proof |
| 22 | Profile plateAdised Aluminium | 1100 x700 mm with carriers mounting frames and mounting accessories To be fitted onto the pneumatic workstation |
| 23 | Pneumatic Workstation with 40 square mm aluminium profile legs | WorktableSize Approx L1200mmXW900mmXH900 mm with four castor wheels including two lockable wheels at the front side 2 Drawer Size ApproxL460mmxW495mm xH158mm and overall size of Drawer unit Approx L470mmxW495mmxH825m m and 3 Drawer slide height Approx 85mm |
| 24 | Carrier for mounting components, such as PB and relay boxes. | As per ncvt norms |
| 25 | Cut section model for pneumatic components | As per ncvt norms |
