Archaeological Survey Of India -ASI has published Tender For Mw (Cons.) Special Repair To Ancient Remains In Bhismak Nagar At Lower Dibang Valley Of Arunachal Pradesh (2022-23). Submission Date for this Tender is 16-03-2023. Earth Moving Machinery Tenders in Lower Dibang Valley Arunachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Core Conservation works |
2 | Item No. 1.Renewing lime concrete with 50% mortar of lime,surkhi,sand (1:1:1) and brick aggregate (1:2:4) mixing with organic materials including beating upto 7 days to the floor and roof after removal of old damaged decomposed and deteriorated lime concrete/rubbish etc Supply of Materials:- |
3 | 1. Removal of dead concrete |
4 | 2. Brick aggregate |
5 | 3. Un-slaked Lime |
6 | 4. Brick surkhi |
7 | 5. River Sand |
8 | 6. Molasses |
9 | 7. Bel fruit gum |
10 | 8. Gul nut |
11 | 9. Mati Dal |
12 | 10. White Katha |
13 | 11. Methi |
14 | Item No. 2. Provision for pointing & edging of the wall etc. with lime - sand -surkhi mortar (1:1:1) mixing with organic materials after raking on the joints of wall surface including cleaning, washing etc. Supply of Materials :- |
15 | 1. Un-slaked Lime |
16 | 2. Brick surkhi |
17 | 3. River Sand |
18 | 4. Molasses |
19 | 5. Bel fruit gum |
20 | 6. Gul nut |
21 | 7. Mati Dal |
22 | 8. White Katha |
23 | 9. Methi |
24 | Item No. 3. Provision for restoration of ancient walls with 10% old bricks and 90% bricks special size brick (20 X 18 X 5 cm) and lime-sand-surkhi (1:1:1) mortar with organic materials Supply of materials |
25 | 1. Special Size bricks (20x18x5 cm) |
26 | 2. Un-slaked Lime |
27 | 3. Brick surkhi |
28 | 4. River Sand |
29 | 5. Molasses |
30 | 6. Bel fruit gum |
31 | 7. Gul nut |
32 | 8. Mati Dal |
33 | 9. Methi |
34 | 10. Polymer Latex |
35 | Item No. 4 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
36 | Item No.5. Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge |
37 | Item No.6. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (to be cleared 2 time from Sep"22 to Mar"23 as due to heavy rainfall thick jungle grows very soon) |
38 | Item No.7. Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
39 | Item No.8. Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
40 | Item No. 9. Providing and laying dry brick aggregate 40 mm to 50 mm thickness |
41 | Item No.10. Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources |
42 | Item No.11. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Mild steel and Medium Tensile steel bars |
43 | Item No.12. Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level ::1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources) |
44 | Item No.13 Centering and shuttering Including strutting, propping etc. and removal of form for all heights: Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
45 | Item No. 14 Steel Work welded in built up section/frame work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in grating, frames, guard bar, ladder, railings, brackets, gates and similar works |
46 | Item No.15. 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
47 | Item No. 16. Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
48 | Item No. 17 Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
49 | Item No. 18 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steelmembers shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
50 | Item No. 19. Provision for fixing of radium signage on steel plate |
51 | Item No.20. Provision for fitting and fixing of 15 V LED solar light at site including all accessories and charges etc. |
52 | Item No. 21 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand) |
53 | Item No. 22 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): Flush / Ruled/ Struck or weathered pointing |
54 | Item No. 23. Provision for transportation and head load charges for remote location @ 2% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail