Tender For Construction Of Ors Living Accommodation With Kitchen And Dining Hall At Basam Bop Of 9Th Bn Itbp.
Tender Value
1.30 Crore
Estimated cost
Bid Submission
10 Mar 2023
0 days left
EMD
2.62 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leparada → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Ors Living Accommodation With Kitchen And Dining Hall At Basam Bop Of 9Th Bn Itbp.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation bymanual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) includinggetting out and disposal ofexcavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge: in all kind of soils. |
| 2 | Earth work in excavation bymanual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. in all kind of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (1:5:10) (1 Cement :5 Coarse sand :10 graded stone aggregate 40mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level: 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : with cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, and plinth beams. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns. |
| 10 | Centering & shuttering including strutting, propping etc. and removal of form work for shelves |
| 11 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . TMT bars make TATA TISCON/SAIL |
| 12 | Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 13 | Random Rubble dry masonry with hard stone in foundation and plinthat plinth level |
| 14 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 15 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 16 | Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 17 | Providing wood work in frames ofdoors, window, clerestory windows and other frames, wrought, framed and fixed in position,seasonedhollock /Local pine wood. |
| 18 | Providing wood work in frames of false ceiling portition etc. sawn and put up in positionseasonedhollock/ Local wood) |
| 19 | 12 mm cement plaster of mix 1:6 (1cement : 6 fine sand) |
| 20 | 20 mm cement plaster of mix 1:6 (1cement : 6 fine sand) |
| 21 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption\"s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. |
| 22 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | 25 mm thick planking, tounged and grooved in flooring including fixing with iron screws complete with : seasoned hollock/local pine wood |
| 25 | Providing and laying viniyl flooring 0.80 mm thick of approved shade to be fixed with adhesive of approved qly. : 80 mm thick |
| 26 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete : Hot finished welded type tubes.(Tata/Jindal (Hissar) medium. |
| 27 | Structural steel work riveted, bolted or welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 28 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 29 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm). |
| 30 | Providing and fixing wind ties of 40x 6mm flat iron section 40x6mm flats. |
| 31 | Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick |
| 32 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick |
| 33 | Providingand fixing wooden moulded beading to ceiling with iron screws plugs and ppriming coat on unexposed surface etc complete seasoned local pine wood 35x10 mm |
| 34 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class local pine wood . 35 mm thick shutters |
| 35 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :First class local pine wood planks |
| 36 | Providing and fixingglazed shutters for doors, windows and clerestory windows using 10 kg/sqm.(4 mm thick) glass panes including black enameled ISI marked M.S butt hinges with necessary screws. First class local Pine wood. 35 mm thick |
| 37 | Providing and fixingwire gauge shuttersusinggalvanised M.S. wire gauge withaverage width of apeture 1.4 mm in both directions with wire of dia 0.63 mm, for doors and windowswith hinges and necessary screws. First class local pine wood 35 mm thick with ISI marked M.S. pressed butt hinges of required size. |
| 38 | Providing and fixing ISI marked oxidised M.S. sliiding door bolts black finish with nuts and screws etc complete of size 250x16 mm. |
| 39 | Providing and fixing ISI marked oxidised M.S. tower bolts black finish, (Barrel type) with nuts and screws etc complete of size 250x10 mm. |
| 40 | Providing and fixing ISI marked oxidised M.S. tower bolts black finish, (Barrel type) with nuts and screws etc complete of size 150x10 mm. |
| 41 | Providing and fixing ISI marked oxidised M.S. handlesconforming to IS:4992 black finish,with nuts and screws etc complete of size 125 mm. |
| 42 | Providing and fixing aluminium casement stays, ISI marked, anodised transparent or dyed to required colour and shade, with necessary screws etc complete. |
| 43 | P/F PVC coated curtain rods 20 mm dia with clamps and side brackets with necessary screws etc complete |
| 44 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 45 | P/F steel pegs batten with 6 nos steel pegs |
| 46 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 47 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, 40 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mm. |
| 48 | Providing, laying and jointing PVC (Heavy) pipes 100 mm dia nominal bore with solvent including testing of joints etc. complete including all necessary fittings. MAKE PRINCE/PRAKASH/FINOLEX/AKG /SUPREME /TIRUPATI |
| 49 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (internal work, exposed on wall) and painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality. : 15 mm dia nominal bore |
| 50 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.:20 mm dia nominal bore |
| 51 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 52 | Providing and fixing CP brass stop cock 15 mm dia ( concealed) of make Parko/Kingstone/Essco confirming to IS:8931. |
| 53 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 54 | Finishing wall with acrylic smooth exterior paint of required shade : New work (Two or more coats applied @ 1.67 litre/sqm over and including priming coat of exterior primer applied @ 2.20Kg/sqm) |
| 55 | Applying priming coat With ready mixed pink or grey primer ofAsian/Jonson & Nicolson brand and manufacture on wood work (hard and soft wood) |
| 56 | Applying a coat of water thinnable cement prmer of approved brand aand manufacturer on wall surface. Water thinnable cement primer. |
| 57 | Painting with synthetic enamel paint of Nerolac/Jenson & Nicolson/Asian (1st quality) to give an even shade: two or more coats on new work. |
| 58 | Wiring for light point/fan point/ exhaust point/ call ball point with 1.5 sq. mm FR PVC insulated copper conducter single core cable in surface/ recessed 20 mm PVC conduit (Polymer/Polyfit/Anchor/ISI), with piano type switch (Anchor/CONA), phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 Sqmm FR PVC insulated copper conducter single core cable (Plaza/Havell\"s/Anchor) etc as required.Group A |
| 59 | Wiring for circuit/sub main wiringalong with earth wire with 2x1.5 sq mm + 1x1.5 sq mm earth wire FR PVC insulated copper conducter, single core cable in surface/ recessed 20 mm PVC conduit (Polymer/Polyfit/Anchor/ISI)as required. Wire should be of Plaza/Havell\"s/Anchor) |
| 60 | Wiring for circuit/sub main wiringalong with earth wire with 2x10 sq mm + 1x10 sq mm earth wire FR PVC insulated copper conducter, single core cable in surface/ recessed PVC conduit (Polymer/Polyfit/Anchor/ISI) as required. Wire should be of Plaza/Havell\"s/Anchor) |
| 61 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, incuding P/F 6 pin 15/16 amps piano type socket outlet and 15/16 amps piano type switch, connections etc as required. |
| 62 | Supplying and fixing PVC angle/Batten holder (Anchor/Ambit) including connectionsetc. as required. |
| 63 | Supplying and fixing MCB DB 6 ways (Havell\"s) complete with connections, testing and commissioning etc as required. |
| 64 | Supplying and fixing double Pole 40 Amp, 240 volts, isolator (Havells) in the existing MCB DB complete with connections, testing and commissioning etc as required. |
| 65 | Supplying and fixing 16 Amp rating, 240/415 volts (Havells), \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Single pole |
| 66 | Supplying and fixing 18 watt LED batten fitting (Havell\"s/Philips/Bajaj) complete |
| 67 | Supplying and fixing Exhaust fan 450 mm (Havells\"/Bajaj/Philips with complete fittings |
AI Tender Summary
Tender Timeline
Feb 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender