Tender For Supply Of Mechanical Items, faridkot-Punjab

Supply Of Mechanical Items , Mechanical Items: , Pneumatic Trainer Kit-1, Each Consisting Of The Following Matching Components And Accessories:-I.Single Acting Cylinder -1,Ii. Double Acting Cylinder-1, Iii. 3/2-Way Valve-2,Iv. 3/2-Way Valve-1, V. One-Way Flow Control Valve-2,Vi. 5/2-Way Valve-1, Vii. 5/2-Way Valve-1, Viii. 5/2-Way Pneumatic Actuated Valve-1, Ix. 3/2-Way Roller Lever Valve-2, X. Shuttle Valve (Or) -1, Xi. Two-Pressure Valve (And)-1,Xii. Pressure Gauge-1, Xiii. Manifold With Self-Closing-1,Xiv. Pushbutton Station For Electrical Signal Input-1, Xv. Relay Station -1,Xvi. 3/2-Way Single Solenoid Valve-1, Xvii. 5/2-Way Single Solenoid Valve -1, Xviii. 5/2-Way Double Solenoid Valve -1, Xix. Power Supply Unit-1, Xx. Profile Plate, Anodised Aluminium-1- (I.Single Acting Cylinder (Max. Stroke Length 50 Mm, Bore Dia 20 Mm), Ii. Double Acting Cylinder (Max. Stroke Length 100 Mm, Bore Dia 20 Mm, Magnetic Type),Iii. 3/2-Way Valve(Manually-Actuated, Normally Closed), Iv. 3/2-Way Valve(Pneumatically-Actuated),V. One-Way Flow Control Valve (Operating Pressure 60 Bar, Max. Permissible Pressure 120Bar), Vi. 5/2-Way Valve (With Manually-Operated Switch) , Vii. 5/2-Way Valve (Pneumatically-Actuated, Spring Return ), Viii. 5/2-Way Pneumatic Actuated Valve (Double Pilot), Ix. 3/2-Way Roller Lever Valve (Direct Actuation Normally Closed ), X. Shuttle Valve (Pressure Range 1-16 Bar),Xi. Two-Pressure Valve (And)-(0-16 Bar) , Xii. Pressure Gauge- (0-16 Bar) , Xiii. Manifold With Self-Closing (Nrv, 6-Way) ,Xiv. Pushbutton Station For Electrical Signal Input (With 3 Illuminated Momentary-Contact Switches (1 No + 1 Nc) And 1 Illuminated Maintainedcontact Switch (1 No + 1 Nc), Contact Load 2A ), Xv. Relay Station (With 3 Relays Each With Four Contact Sets (3 No+1 Nc Or Change Over Type- 5A),Xvi. 3/2-Way Single Solenoid Valve (With Led) ,Xvii. 5/2-Way Single Solenoid Valve (With Manual Override And Led ), Xviii. 5/2-Way Double Solenoid Valve (Input Voltage 85 – 265 V Ac, Output Voltage: 24 V Dc, Output Current: Max. 4.5 A, Short-Circuit-Proof.), Xix. Power Supply Unit (1100X700 Mm, With Carriers, Mounting Frames And Mounting Accessories (To Be Fitted Onto The Pneumatic Workstation), Xx. Profile Plate, Anodised Aluminium-(1) Work Table – Size(Approx.)L1200mmxw900mmxh90 0Mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, (2) Drawer Size (Approx.) – L460mmxw495mm Xh158mm Each, And Overall Size Of Drawer Unit (Approx.) - L470mmxw495mmxh825 Mm And(3) Drawer Slide Height (Approx.) 85Mm. , Dial Vernier Caliper With Metric 200 Mm Reading 0.05 Mm-System Of Measurement Inch/Metric Material Type Stainless Steel Manufacturer Series Number 530 Series Specific Uses For Product Depth , Inside , Outside , Step Tip Description Standard (Stainless Steel, Readout: 0.01Mm; 0.02Mm.Measuring Range: 0-200, Satin Chrome Plated,) , Tool Bits (12 X 150 Mm Sq. Assorted Shaped)-12*150 Mm Make With High Speed Steel Tool Bits , Power Saw Machine – Hydraulic Feed System -400Mm Blade Size-Saw Head Unit Is Supported By Two Rigid Hard- Chrome Plated & Ground Vertical Columns, Which Are Guided By Self Lubricated Bushes. The Blade Is Guided By Bearings & Carbide Wear Pads. The Blade Can Be Tightened And Released Hydraulically. The Blade Is Hydraulically Tightened Up To Recommended Tensile Strength Of The Saw Blade. The Saw Is Driven By Sufficient Drive Power To Cut Material. , Cnc Turning Center Dia. 150 Mm., Between Center Distance 500 Mm. At Least 8 Station Turret. Preferably With A Popular Controller Like Fanuc, Siemens, Etc-Specifications •Cad-Cam Compatibility. • Fanuc Emulated Key Board. • Table Locking Facility With Stepper Motor • Powerful Stepper Motors For Axis Control. • Powerful Pc Software For Graphics. • Display Of Actual Feed Rate, Spindle Speed • Automatically Detects Wrong Steps In Programming. • Safety Functions With Emergency Stop, Over • Alarm & Self Diagnostic Functions. Centre Height- 100 Mm Swing Over Carriage- 60 Mm Distance Between Centre- 200 Mm Max. Machining Diameter- 30 Mm Max. Longitudinal Travel- 300 Mm Spindle Speed (With Back Gear)- 40 To 2000 Rpm Cross Slide Inclination- 0 Degrees, Standard Cutting Tool Size- 16 X 16 Mmspindle Motor- Dc Motor, 1 Hp, Thread Cutting- Straight, Automatic Lubrication Points- Provided Input Systemmetric / Inch Control Axis- Simultaneous Axis Interpolation- Linear, Circular, Parabolic & Elliptical , Minimum Increment- 0.005 Mm Minimum Movement Command X-0.005Mm Minimum Movement Command Z-0.005Mm Repeatability- + 0.020 Mm Feed Rate X & Z- 400 Mm/Min Rapid Feed Rate X & Z- 800 Mm/Mm Programmable Dwell (Seconds)- Programmable Tool Offset With Turret- 8 Nos. Backlash Compensation- Provided Speed Over Ride- 40%- 160% Feed Over Ride- 20%- 120% Type Of Control System- Pc Based System Real Time Tool Path Simulation- Provided Cnc Trainer Tools Assorted – 01 Set Cnc Boring Tool Assorted – 01 Set , Box Drawing Instrument -Containing One 15 Cm Compass With Pin Point, Pin Point & Lengthening Bar, One Pair Spring Bows, Rotating Compass With Interchangeable Ink And Pencil Points, Drawing Pens With Plain Point & Cross Point, Screw Driver And Box Of Leads.(0.2,0.3,0.4 Mm). , Auto Level With All Accessories-Stand ,Staff Etc , Transit Theodolite With Stand With All Accessories-Stand With All Accessories , Instrument For Total Station With Latest Model, With All Accessories -(Graphic Lcd Display On Both Side.Multy Function Key Board On Both Side. Able To Interchange Data Between Gps And Total Station Without Any Data Conversion. Minimum 8 Hours Rechargeable Li-Ion Battery .Poles And Prism 2Nos Each) , Water Cooled Induction Welding/ Brazing Machine-200-250 Amp., Induction Coil Length 3 Inch And 2.5 Inch , Plastic Welding Machine With Hot Air Gun-Temp. Display, Variable Temp., Pe,Pp& Pvc Sheet Or Pipe Welding Control With Stand. Accessories. , Chisel Firmer(Bevel Edged), 6,10,15,20 And 21Mm Width ( 5 No’S)-Chisel Firmer(Bevel Edged) 6Mm Width Wooden Handle (With Ferrule Topand Bottom) Blade - Forged Steel Hardent At Cutting Edge Width Of Blade - 6,10,15,20 And 21Mm Width ( 5 No’S) , Carpenter Vice Jaws,250Mm-Materials :- Body And Sliding Jaw : Sg Iron Of Guaranteed Strength. Slide Bars : Solid Steel Main Screw : High Quality Steel Front Dog : High Quality Steel 210 Mm , Carpenters Work Bench 2400*920*800 Mm Height-Body Cast Iron , Top Wood , (2400X920x800mm) , Portable Planing Machine -600 W Powerful Motor,Speed 15000 Rpm, Max. Depth Of Cut 2.5Mm, Planer Width 82Mm, With Accessory , Portable Jig Saw Machine -Aminimum 700 W Powerful Motor,Stroke Length 26Mm, Capacity In Mm Metal 4 Wood-130.,4Stroke Pendulum Action,Stroke 0-3100/Min, With Accessory,Body Aluminium , Tenoning Machine (Single Ended)-Tenoning Machine (Single Ended) -Working Ht. 864 Mm,Cutter Dia. 200 Mm, Power 2X 2 Hp, Tenening Capacity 200 Mm, Weight. 300 Kg(Appxt.), Slide Size 635 X 229 Mm , Mortising Machine (Combined Hollow Chisel And Chain Type.)-1)Mortising Machine Chisel Type Chain. Depth Of Cut 3 1/2 , Cross Moment Of Table - 4, Longitudinal Movement - 9 1Hp 2500 Rpm 3Ph 2) Mortising Machine Chain Type Up Down Moment Of Table - 3 Longitudinal Movement - 12 Depthof Cut (Max) 5 1/2 2Hp 1440 Rpm 3Ph With 1/2 Chain

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	28-Feb-2023	Other Corrigendum	Other	20-03-2023

INR 1000 /-

INR 45810.0 /-

Refer document

Name of Work: Supply of Mechanical Items of various trades

Sl. No.	Item Description
1	Mechanical Items:
2	Pneumatic Trainer Kit-1, each consisting of the following matching components and accessories:-I.Single acting cylinder -1,II. Double acting cylinder-1, III. 3/2-way valve-2,IV. 3/2-way valve-1, V. One-way flow control valve-2,VI. 5/2-way valve-1, VII. 5/2-way valve-1, VIII. 5/2-way pneumatic actuated valve-1, IX. 3/2-way roller lever valve-2, X. Shuttle valve (OR) -1, XI. Two-pressure valve (AND)-1,XII. Pressure gauge-1, XIII. Manifold with self-closing-1,XIV. Pushbutton station for electrical signal input-1, XV. Relay station -1,XVI. 3/2-way single solenoid valve-1, XVII. 5/2-way single solenoid valve -1, XVIII. 5/2-way double solenoid valve -1, XIX. Power supply unit-1, XX. Profile plate, Anodised Aluminium-1- (I.Single acting cylinder (Max. stroke length 50 mm, Bore dia 20 mm), II. Double acting cylinder (Max. stroke length 100 mm, Bore dia 20 mm, magnetic type),III. 3/2-way valve(manually-actuated, Normally Closed), IV. 3/2-way valve(pneumatically-actuated),V. One-way flow control valve (Operating pressure 60 Bar, Max. Permissible pressure 120Bar), VI. 5/2-way valve (with manually-operated switch) , VII. 5/2-way valve (pneumatically-actuated, spring return ), VIII. 5/2-way pneumatic actuated valve (double pilot), IX. 3/2-way roller lever valve (direct actuation Normally Closed ), X. Shuttle valve (Pressure Range 1-16 Bar),XI. Two-pressure valve (AND)-(0-16 bar) , XII. Pressure gauge- (0-16 bar) , XIII. Manifold with self-closing (NRV, 6-way) ,XIV. Pushbutton station for electrical signal input (with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintainedcontact switch (1 NO + 1 NC), Contact load 2A ), XV. Relay station (with 3 relays each with four contact sets (3 No+1 NC or Change over type- 5A),XVI. 3/2-way single solenoid valve (with LED) ,XVII. 5/2-way single solenoid valve (with manual override and LED ), XVIII. 5/2-way double solenoid valve (Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof.), XIX. Power supply unit (1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the pneumatic workstation), XX. Profile plate, Anodised Aluminium-(1) Work Table – Size(Approx.)L1200mmXW900mmXH90 0mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer Size (Approx.) – L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.) - L470mmxW495mmxH825 mm and(3) Drawer slide height (Approx.) 85mm.
3	Dial Vernier Caliper with metric 200 mm reading 0.05 mm-System of Measurement Inch/Metric Material Type Stainless Steel Manufacturer Series Number 530 Series Specific Uses For Product Depth , Inside , Outside , Step Tip Description Standard (Stainless Steel, Readout: 0.01mm; 0.02mm.Measuring range: 0-200, Satin chrome plated,)
4	Tool Bits (12 X 150 mm sq. assorted shaped)-12*150 mm make with High Speed Steel Tool Bits
5	Power saw machine – hydraulic feed system -400mm Blade Size-Saw head unit is supported by two rigid hard- chrome plated & ground vertical columns, which are guided by self lubricated bushes. The blade is guided by bearings & carbide wear pads. The blade can be tightened and released hydraulically. The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The saw is driven by sufficient drive power to cut material.
6	CNC turning center dia. 150 mm., between center distance 500 mm. At least 8 station turret. Preferably with a popular controller like Fanuc, Siemens, etc-Specifications •CAD-CAM compatibility. • FANUC Emulated Key Board. • Table Locking facility with stepper motor • Powerful stepper Motors for axis control. • Powerful PC software for graphics. • Display of Actual Feed rate, Spindle speed • Automatically detects wrong steps in programming. • Safety Functions with Emergency Stop, Over • Alarm & self Diagnostic Functions. Centre Height- 100 mm Swing Over Carriage- 60 mm Distance Between Centre- 200 mm Max. Machining Diameter- 30 mm Max. Longitudinal Travel- 300 mm Spindle Speed (with Back Gear)- 40 to 2000 RPM Cross Slide Inclination- 0 Degrees, Standard Cutting Tool Size- 16 x 16 mmSpindle Motor- DC Motor, 1 HP, Thread Cutting- Straight, Automatic Lubrication Points- Provided Input SystemMetric / Inch Control Axis- Simultaneous axis Interpolation- Linear, Circular, Parabolic & Elliptical , Minimum Increment- 0.005 mm Minimum Movement Command X-0.005mm Minimum Movement Command Z-0.005mm Repeatability- + 0.020 mm Feed Rate X & Z- 400 mm/min Rapid feed rate X & Z- 800 mm/mm Programmable Dwell (seconds)- Programmable Tool Offset with Turret- 8 nos. Backlash Compensation- Provided Speed Over Ride- 40%- 160% Feed Over Ride- 20%- 120% Type Of Control System- PC Based System Real Time Tool Path Simulation- Provided CNC trainer tools assorted – 01 Set CNC Boring tool assorted – 01 Set
7	Box drawing instrument -Containing one 15 cm compass with pin point, pin point & lengthening bar, one pair spring bows, rotating compass with interchangeable ink and pencil points, drawing pens with plain point & cross point, screw driver and box of leads.(0.2,0.3,0.4 mm).
8	Auto level With all accessories-Stand ,staff etc
9	Transit Theodolite with stand with all accessories-stand with all accessories
10	Instrument for Total Station with latest model, With all accessories -(Graphic LCD display on both side.Multy function key board on both side. Able to interchange data between GPS and Total station without any data conversion. Minimum 8 hours rechargeable li-ion battery .Poles and Prism 2Nos each)
11	Water cooled induction welding/ Brazing machine-200-250 Amp., induction coil length 3 inch and 2.5 inch
12	Plastic welding machine with hot air gun-temp. display, variable temp., PE,PP& PVC sheet or pipe welding control with stand. Accessories.
13	Chisel Firmer(Bevel edged), 6,10,15,20 and 21mm width ( 5 no’s)-Chisel Firmer(Bevel edged) 6mm width Wooden handle (with ferrule topand bottom) blade - forged steel hardent at cutting edge width of blade - 6,10,15,20 and 21mm width ( 5 no’s)
14	Carpenter vice jaws,250mm-Materials :- Body and sliding jaw : SG Iron of guaranteed strength. Slide Bars : Solid Steel Main Screw : High Quality Steel Front Dog : High Quality Steel 210 mm
15	Carpenter"s work bench 2400*920*800 mm height-body cast iron , top wood , (2400x920x800mm)
16	Portable Planing Machine -600 W powerful motor,speed 15000 rpm, max. depth of cut 2.5mm, Planer width 82mm, With accessory
17	Portable Jig Saw Machine -aMinimum 700 W powerful motor,Stroke length 26mm, capacity in mm metal 4 wood-130.,4stroke pendulum action,Stroke 0-3100/min, With accessory,body aluminium
18	Tenoning machine (Single ended)-Tenoning machine (Single ended) -Working ht. 864 mm,cutter dia. 200 mm, Power 2x 2 HP, Tenening capacity 200 mm, weight. 300 Kg(Appxt.), slide size 635 x 229 mm
19	Mortising machine (Combined hollow chisel and chain type.)-1)Mortising machine chisel type chain. Depth of cut 3 1/2 "", cross moment of table - 4"", longitudinal movement - 9"" 1HP 2500 rpm 3ph 2) Mortising machine chain type up down moment of table - 3"" longitudinal movement - 12"" depthof cut (max) 5 1/2 "" 2HP 1440 rpm 3ph with 1/2 ""chain