Renovation/ Replacement Of Sluice Gate Ms Jaal On Raw Water Channel No. 1 N 2 At 1St 40 Mgd Plant At Wazirabad Water Works.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Mar 2023
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
wazirabad → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation/ Replacement Of Sluice Gate Ms Jaal On Raw Water Channel No. 1 N 2 At 1St 40 Mgd Plant At Wazirabad Water Works.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of gear box, CI dome by cutting of rusted fastener and taking out the spindle, nut and other related mechanical parts. This job also include dismantling of ms Jaali vertical & MS Jaal. |
| 2 | Dismantling of extension shafts by cutting old nut & bolts of the couplers through gas cutting set in under deep water 6’(Approx.) |
| 3 | Dismantling of CC column structure with the help of breaker in chipper for taking out C-Section titled in the Sluice Gate. The works includes scaffolding charges so that broken CC should not be mixed with water as no shut down will be provided by the department for doing the work. |
| 4 | Removing the flap from the frame and taking it out from 6’ (Approx.) deep water. The deep chamber containing chlorinated water. The job will be executed with the help of tipai, chain blocks, ceiling, heavy labour and other tool and tackles as required at the site. |
| 5 | Fixing of C-section on the channel by doing CC concrete on existing column on the top of the section. |
| 6 | Providing of various size SS nut bolt with washers at per site requirement. |
| 7 | Providing/Fixing of CI Sluice Gate Flap/Shutter made out of CI of approximate size 1 Mtr. X 1.2 Mtr. And 40 mm thick. The work includes grinding, finishing, drilling, moulding, welding, cutting etc and same should be fixed in the slides of the frame with the help of chain block, tipai, hydra and heavy labour complete in all respect as per sample. |
| 8 | Fabrication/ Fixing of SS spindle of 80 mm diameter and having length of 2.4 mtr. Approximate including turning, threading and complete in all respect as per site requirement with thrust bearing, spindle nut, hand wheel and complete assembly. |
| 9 | Assembly the CI slide and extension shaft with the help of coupler and lowering down the assembly with the help of tipai, chain block and heavy labour etc. |
| 10 | Replacement/Fixing of Gear box complete in all respect, Bush, Gear box frame, Bearing, Pinion MS Channel for fixing of Gear etc and other hardware item required at site for trouble free and smooth operation of sluice gates. |
| 11 | Fabrication/ supply & Fixing of S.S. Jaali of size 2 Mtr x 1.2 Mtr made out of S.S. angle of size 75 x 75 x10 mm angle frame and 20 mm round 6’ height S.S. flat size 50 x 8 mm in each Jaali with a gap of 40 mm including cutting, welding, finishing, painting of 2 coat of red oxide and two coat of black enamel paint, including providing of SS nut and bolts complete in all respect. |
| 12 | Renovation of MS Jaal of raw water channel by providing MS bars, MS angle of 75 x 8 mm size, Channel, sheets etc by welding with the help of manual labour. Steel work welding in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. |
| 13 | Providing of MS trolley/basket for garbage, size of trolley 1200 x 600 x 300 mm approx. made out from MS angle and sheet 2 mm thick and rubber wheel etc as required. |
| 14 | Making and Fabrication of hand rake 1400 mm long approx. and 10 teeth for cleaning of bar screen as per site requirement. |
| 15 | Providing and fixing hand rail of M.S. tube approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 16 | Providing services of 4 Nos. underwater divers diving with one supervisor for managing oxygen Cylinder, safety of the divers etc. and other under water equipment required at site work includes cleaning the surface of blend grooves of both the end where sluice gates is to be rest under deep water which includes lowering/grinding of gate. The work also includes cleaning/grinding of frame by iron brushes, grinding machine from top to bottom of gate. The work also includes arrangement of all the safety equipment required at site against chlorine. The slide of sluice Gates should be cleaned under water so that it may be operated smoothly as and when required. This also includes arrangement of safe enclose equipped with the necessary equipment for making the diver’s body temperature normal as per surrounding atmospheric conditions. Note: 10 No. of Job is required for one Gate. |
| 17 | Hiring Charges of tipai, drill machine, chain block, gas cutter, welding machine, tools and tackles etc as required on site. This also includes Testing & Commissioning of Sluice Gate for any leakage on full load. |
AI Tender Summary
Tender Timeline
Feb 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender