Tender For Construction Of Dining Hall To Community Hall In Porpandal Panchayat In Uthiramerur Panchayat Union Under Mlacds 2022-23
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Mar 2023
0 days left
EMD
20160
Bank guarantee accepted
Document Fee
20160
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
uthiramerur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Dining Hall To Community Hall In Porpandal Panchayat In Uthiramerur Panchayat Union Under Mlacds 2022-23
BOQ
| Sl. No. | Item Description |
| 1 | EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc.,including levelling the sites complete complying with standard specifications and as directed. |
| 2 | CEMENT CONCRETE 1:4:8 mix using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification. |
| 3 | Fillling in basement with conveyed gravel layers of not more than 15cm thick,well rammed, watered and compacted, complying with standard specification etc., complete. |
| 4 | Supplying and filling in foundation and basement and trenches with FILLING SAND in layers of not more than 15cm thick, well watered,rammed and consolidated complying with standard specification etc.,complete. |
| 5 | BRICK WORK in cement mortar 1:5 (One cement and five sand) using second class country bricks of size 23cm x 11cm x 7cm for the following including curing etc., complete complying with standard specifications.(Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). |
| 6 | BRICK WORK in cement mortar 1:5 (One cement and five sand) using second class country bricks of size 23cm x 11cm x 7cm for the following including curing etc., complete complying with standard specifications.(Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). |
| 7 | Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed. Centering below Ground level |
| 8 | Rate for column post |
| 9 | Rate for roof slab, lintel, beam |
| 10 | Rate for sunshade |
| 11 | Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication. |
| 12 | CEMENT CONCRETE 1:1.5:3 mixusing 20mm machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 (One cement and three sand ) and Kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers. For foundation and basement |
| 13 | For superstructure in ground floor |
| 14 | SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (one cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cem,ent mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc.,complete complying with standard specification. |
| 15 | PLASTERING with cement mortar 1:5 (one cement and five sand)12mm thick in all floors complying with standard specifications. |
| 16 | WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters if approved pattern keeping the surface constantly wet by sprinkling lime jaggery water as per standard specification etc., complete as directed by the departmental officers. |
| 17 | Finishing the top of roof with one course of PRESSED TILES of size 23cm * 23cm * 2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with redoxide to the full depth of tiles, complete complying with standard specification.(The rate is inclusive of redoxide and water proofing compound ) and as directed by the departmental officers. |
| 18 | Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. |
| 19 | Fabrication and supply of Mild Steel Window of any required size with Three leaf.Outter frame of 35x35x 5mm equal MSL angle, Mullion section made of 35x 35x5mm equal T-section, shutter frame made of 25x25x5mm equal MSL angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 1No.horizontal for each shutter using M S flat of size 20x5mm fully covered with 18 gauge plain M S full sheet welded with shutter frame neatly and also fixin by welding.Protective grill with 12 mm squqre M S rods at an intervel of not grater than 10 cm centre to centre to the outter frame.2 Nos of peg stays with hole for keeping the windows open in different positions,2 Nos. of locking handles fixing the shutters with 4 Nos. of hinges hold fasts, 6 Nos.of hinges with outter frame of the window including painting the whole unit with one coat best quality of red oxide primer. |
| 20 | Interior / Exterior Emulsion Two coats over priming coat including cost and conveyance of all materials and labour charges etc complete. |
| 21 | Interior / Exterior Emulsion Two coats over priming coat including cost and conveyance of all materials and labour charges etc complete. |
| 22 | PAINTING NEW IRON WORKS for doors, windows and Ventilators, Iron bars, Weldmesh, wiremesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over the existing red oxide primer in all floors.The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification.(The paint to be used should be got approved by the engineer before use on work. |
| 23 | Providing and fixing PVC. Rainwater Downfall pipes of 110mm diametre with necessary shoes, bends and other speicals, clamps, screws, nails, teakwood plugs etc., complete including cost of all materials.The rate is to include cost of removable cast iron Gratings of appropriate size.The size of teakwood plugs to be used is 150mm * 25mm in front and 200mm * 75mm in rear and all other sides with a depth of 100mm.The pipe is to be fixed by means of \"U\" clamps at the cnetre of the pipe screwed to the plugs.The special type of \"U\" clamps at the centre of the pipe to be fixed in addition to these for more than three metres pipe length, complete complying with standard specification. |
| 24 | Supplying and fixing in position of Cudappa slab 50mm thickincluding cost and conveyence to work site and labour cherges etc complete complying with standard specification. |
| 25 | Supply and Fixing Wasin Basin Charges |
| 26 | Plastering with CM 1:5,20mm thick in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers etc., complete. |
| 27 | Wiring with 2x1.50 sqm PVC insulated unsheated Sc.alu Cable of conductor for open Pvc Light Point ,Fan point (SD ,21) |
| 28 | Wiring with 2x1.50 sqm PVC insulated unsheated Sc.alu Cable of conductor for open Pvc Light Point ,Fan point (SD ,21) |
| 29 | Wiring with 2x1.50 sqm PVC insulated unsheated Sc.alu Cable of conductor of 1100V grade insulated for open plug point .(SD 34), |
| 30 | Supply and Fixing Tube Light Charges |
| 31 | Supply and Fixing Ceilling Fan |
| 32 | Supplyandfixing of TNEB meter Board Suitable For 32 A Single Phase sc .With 32 A Fuse Unit etc., (SD 121) |
| 33 | Supply and run off 4x6 sqmPVC unsheated Sc unsheated , Copper Conductor of 1100V grade for Service Main |
| 34 | Supply and fixing of W.T.Bulk head Fitting with guard ( Philips , Bajaj, Crompton ) Suitable for incandecent Lamp with 60 w bulb (SD 80 ) |
| 35 | Supply and fixing of 32 AmpsDpicSwitch of 50 w with Metal Cladwith fuse and neutral with (SD 138) Main |
| 36 | Supplyandfixing run off 2x1.50sqm PVC insulated Sc . Un sheatedSc conductor of 1100 v grade on 7/20 GIBearerwire for Service Main (SD 62) |
| 37 | Towards the charges for EB service Connection |
| 38 | Charges for Conducting Geo Physical Survey |
| 39 | Drilling of 150mm dia Borewells anywhere in Hard rock Tamilnadu including labour charges for inserting casing pipe assembly in the drilled hole |
| 40 | Supply & delivery of 150mm Dia PVC Plain Casing pipe as per IS 12818 / 2010 |
| 41 | Supply and delivery of Three phase submersible pumpset head 15X125 LPM. |
| 42 | Supply and delivery of control Threeboard suitable for Three phase submersible motor. |
| 43 | supply and lying 40mm UPVC Pipe |
| 44 | Supplyand laying of 3 core 4.0 sqm.m submersible cable conforming to IS 694/1990 |
| 45 | Erection charges as per new submersible pumpset and fixing of panel board.7.50HP |
| 46 | Supply and delivery of MS KISOK of size 0.75mx0.45mx0.75m |
| 47 | Supply and fixing of 1000lit HDPE Tank |
| 48 | Supply and fixing of PVC Tap |
| 49 | Supply and fixing of 65mm GM Gate valve |
| 50 | EarthWORK EXCAVATION for Pipe laying works |
| 51 | supply and fixing 63mm PVC Pipe |
| 52 | Labour charges for laying and jointing 63mm PVC Pipe |
| 53 | Refilling the trench with excavated earth |
| 54 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Feb 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender