Tender For Construction Of Veterinary Aid Centre, Grade Ii, At - Dhaba Th- Gondpipri
Tender Value
43.01 Lakhs
Estimated cost
Bid Submission
15 Mar 2023
0 days left
EMD
44000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gondpipri → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Veterinary Aid Centre, Grade Ii, At - Dhaba Th- Gondpipri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Mar-2023 | 2023_CHAND_876544_3 | Date | 15-Mar-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | VAC BUILDING, GR II, AT DHABA:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Bd.A.1 Page No. 259 |
| 2 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means Bd.A.1 Page No. 259 |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.As directed by Engineer in charge. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Bd. E. 1 Page No. 287 |
| 5 | Providingandlayinginsitu/ReadyMix cementconcrete M-20 oftrap/granite /quartzite/ gneiss metalforR.C.C.work infoundationslikeraft,stripfoundations, grillageand footingsofR.C.C.columnsandsteelstanchions etc.includingbailing outwater, Steel centeringformwork,laying/pumpingcoverblocks,compactionand curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.3 Page One Number 298 and B.7, Page One Number38, BDF3,25.11 |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.5 Page No. 300 and B.7, Page.No. 38 |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.6 Page No. 300 and B.7, Page No.38 |
| 8 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete.Bd.A.11 Page No. 263 |
| 9 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. BDG- 2 and 5 |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.E. 3/Page No. 288/I.S. 456 (2000) |
| 11 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteAs director by engineer incharge and BDG- 2 and 5 |
| 12 | Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. Bd. G. 7 Page 316 |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Bd.F.9 Page No. 303 and B.7, Page No.38 |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite / gneiss metalfor R.C.C. canopyas per detailed designs and drawingsincluding steel centering, formwork, laying/pumping, compacting and roughening the surface if special finishis tobeprovidedandcuringetc. complete (excluding reinforcement), with fullyautomaticmicroprocessorbasedPLCwith SCADA enabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade),Bd.F.8/10,Page One Number 303 and B.7, Page One Number 38, 26.09 |
| 15 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Bd.F.8 Page No. 302 and B.7, Page No.38 |
| 16 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc Bd.F.11 Page No. 304 and B.7, Page No. 38 |
| 17 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete..Bd.F.17, Page No. 306 |
| 18 | Providingandfixingcollapsiblesteelgateinone/twoleaveswithhotrolledvertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12mmwithrollerwheelsconfirmingtogradeF.G.150fitted withsnapheadedrivets of minimum size 6 mm max. spacing of vertical channels be 100mmenclosedgatepositionandclear space of 150 mm between two sets of crossingswithholdfasts,stoppers,spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).BD-T-57Page, One Number 511, 39.26 |
| 19 | ProvidingandfixingM40gradethickvibratedpull castorsimilartypeconcreteframe with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mmc/candfixinginwallwith6Nos.ofholdfastof12mmdiabars500mmlong including primer and oil painting etc, complete) frame size 60 mm x 125 mm, As directed by Engineer in charge. BDT, 39.57 |
| 20 | ProvidingandfixingCountry cutteakwoodsingleleafpanelleddoorshutters35mm thickstyleandrailand19mmthick T.W.panelsasperdetaileddrawingincluding wrought iron hold fast stainless steel fixtures and fastening and three coats of oil painting etc. complete.As directed by Engineer in charge.BDT, 39.14 |
| 21 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete..BD-T-34Page No. 499 |
| 22 | Providingand fixing 50 mm x 50 mm Mild Steel square pipe framed steel windows of varioussizesasperdetailswithweldedsquarebars12mmat10cmcentertocenter without hot dip zinccoatingwithout/withventilatorincludingfabrication,glazing withplain/obscured glass panes 5 mm thickof approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete.As directed by Engineer in charge. BDT, 39.66 |
| 23 | ProvidingandfixingCountrycutteakwoodwindowswithdoubleleaf25mmthick planked shutterswithoutventilatorsasperdetaileddrawingsincludingstainlesssteel fixtures andfasteningsandfinishingthewoodworkwithoilpainting3coatsetc. complete. BD-T-43Page, One Number 503, 39.17 |
| 24 | Providing and fixing in positionaluminium fixed window fully glazed of any size as per detailed drawingand asdirectedbyEngineerinchargewith allnecessaryalluminium sectionsincluding necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. a) Colour anodized, 39.53 |
| 25 | Providing and fixing in position powder coated aluminium louvered windows / ventilator ofvarious sizes with powder coating as per detailed drawing and specifications including aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheet glasslouvers,of approved quality etc. complete. As directed by Engineer in charge. BDT, 39.68 |
| 26 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.Bd.U.1 Page No. 537 |
| 27 | Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaningetc. complete.Bd.M.35C / Page No. 393 |
| 28 | Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.Bd.M.29 Page No. 391 |
| 29 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete. |
| 30 | Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring |
| 31 | Providing and laying vitrified mirror / glossy finish tileshaving size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting |
| 32 | Providing and laying Antiskid Ceramic tiles of approved qualityof size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.Bd. M-12 page No. 385 |
| 33 | Providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.Bd.M.13 Page No. 386. |
| 34 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick andrequiredwidthinplain/diamondpatternonbedof1:6C.M.including cement float, filling joints with neat cement slurry,curing, polishingand cleaning etc. complete.Bd.M.3B, Page One Number 380,33.06 |
| 35 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. completBd.L.4 Page No. 368 |
| 36 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Bd. L.2 Page No. 368 |
| 37 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.Bd.L.1 Page No. 367 |
| 38 | Providing and applyingantipeel paint of approvedmake &approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint). |
| 39 | Providing and applyingimpression 24 carrat Luxury paint of approvedmake & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). |
| 40 | Providing and fixing Orissa type white glazed earthenware water closet pan of size 260mm x 440mm x 580mm with approvedmake Slim wall hung cistern with installation kitincluding S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete. |
| 41 | Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete |
| 42 | Providing and fixingWhite glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. |
| 43 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. As directed by Engineer in charge |
| 44 | Providing and fixing 10cm p.v.c. Nahani Trap includingP.V.C.grating bend and piece of P.V.C.. pipe upto the outside face of the wall complete. d.V.32 Page No.567 |
| 45 | Providing, laying and fixing P.V.C. pipe of Required dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.32mm dia |
| 46 | 25mm dia |
| 47 | 15mm dia |
| 48 | Providing and laying in trenches required dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Bd.V.5 Page No. 551,32mm dia |
| 49 | 15mm dia |
| 50 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Bd.V.8 Page No. 554 |
| 51 | Providing and fixing screw down for required dia. wheeled stop tap of brass including necessary sockets/union nut complete.Bd.V.9 Page No. 555, 32mm dia |
| 52 | 25mm dia |
| 53 | Providing and fixing Required dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete As directed by Engineer in charge.110 mm dia. Pipe |
| 54 | 75 mm dia. Pipe |
| 55 | Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 135921992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.As directed by Engineer Incharge, 160 mm dia. Pipe |
| 56 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters. As directed by engineer-in-charge. |
| 57 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Bd.V.43, Page No. 574 |
| 58 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete Bd.V.43, Page No. 574 |
| 59 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.As directed by Engineer in charge. |
| 60 | Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.As directed by Engineer in charge. |
| 61 | Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complet Specfications bdv23 |
| 62 | Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.As directed by Engineer in charge. |
| 63 | Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. As directed by Engineer in charge. |
| 64 | Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete.Bd.V. 12 Page No. 556 |
| 65 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.Bd.V.46, Page No. 576 |
| 66 | Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface.As directed by Engineer in charge |
| 67 | Providing and fixing 90 cm x 60 cm Granaite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete Bd.W.7 Page No.586 |
| 68 | Providingandfixing900mmhighS.S.304GradeStainlesssteelrailingwith40mm diameter and1.5mmthickattop, 40mm diameterand1.5mm thickverticalsupports spaced at 1.5mcenter to center and 8mm thicktoughened glassincluding fabricating ,fixtures, errecting ,necessarywelding,grinding,finishing,buffingto stainless steel pipe etc. complete. As directed by Engineer Incharge, BDW, 40.07 |
| 69 | Provision for source certificate of survey(150mm dia.) |
| 70 | Driling of 150mm. Dia. bore (Including conveyence) by using D.T.H. drilling machine in all types of soil, moorum etc. complete. |
| 71 | Providing, fixing & placing 140mm. Dia. @ 8kg/cm² PVC casing pipe with socket etc.complite. |
| 72 | Giving yield test of the existing bore well by using 90 degree V notch (Air lift method) etc.complite. |
| 73 | Providing India Mark Hand pump unit II with rising pipe & connecting rodincluding all types of accessories, manpower transportation, all types of taxes etc.complite |
| 74 | Installation & fixing ofIndia mark Hand pump set with rising pipe & connecting rodincluding all types of accessories etc.complite. |
| 75 | Construction of cement concrete platform for borewell etc.complite. |
| 76 | Providing & Fixing M.S.Cap for 150mm dia.casing pipe etc.complite. |
| 77 | COMPOUND WALL TO VAC PREMISES, AT DHABA :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Bd.A.1 Page No. 259, 21.02 |
| 78 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge. BDA, 21.40 |
| 79 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand, Bd. E. 1 Page No. 287, 24.01 |
| 80 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand, Bd.F.3 Page No. 298 and B.7, Page No.38, 25.11 |
| 81 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.5 Page No. 300 and B.7, Page.No. 38, 25.31 |
| 82 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.6 Page No. 300 and B.7, Page No.38, 25.50 |
| 83 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksin cementmortar 1:6 in superstructure including striking joints, raking out joints,wateringand scaffolding etc.Complete. Bd.G.5 Page One Number 315, 27.05 |
| 84 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) Bd.E. 3/Page No. 288/I.S. 456 (2000), 24.16 |
| 85 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations,slabs, beams columns, canopies, staircase, newels, chajjas,lintels pardis, copings, fins, arches etc. as per detailed designs,drawings and schedules. including cutting, bending, hookingthe bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306, 26.33 |
| 86 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete, Bd.L.4 Page No. 368, 32.06 |
| 87 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 Page No. 369, 32.11 |
| 88 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kg. to 20 kg. Per Sq.m.), As directed by Engineer- in-charge. BDW 6A, 23.09 |
| 89 | Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. As directed by Engineer in charge. BDO, 35.24 |
| 90 | PAVER BLOCK IN VAC PREMISES, AT DHABA :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means, Bd.A.1 Page Number 259, 21.02 |
| 91 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. BDA, 21.40 |
| 92 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. Bd. E. 1 Page No. 287/BDE 1/It.no.24.01 |
| 93 | Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.complete. As directed by Engineer in charge, BDM, 33.52 |
| 94 | Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)with SCADA with Natural / VSI standard Artificial Sand, cement 4.05 bags/cumt) CD 8 Page 163, CD,11.29 |
AI Tender Summary
Tender Timeline
Mar 09, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 15, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender