Tender For Construction Of Material Recovery Facility Structure At Dumpimg Yard Khairthal, Alwar-Rajasthan

Tender For Construction Of Material Recovery Facility Structure At Dumpimg Yard Khairthal -Earth Work In Excavation In Foundation, Trenches Etc. Including Dressing Of Sides And Ramming Of Bottoms, Including Getting Out The Excavated Material, Refilling After Laying Pipe / Foundation And Disposal Of Surplus Excavated Material At A Lead Upto 50M Suitable Site As Per Direction Of Engineer For Following Depths, Below Natural Ground / Road Top Level.4.10.1 In All Types Soils / Saturated Soil Such As Moorum, Sand, Sandy Silt, Clay, Black Cotton Soil, Kankar, Etc. 4.10.1.1 Depth Upto 1.5 M Cum 210.50 3 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - All Work Upto Plinth Level : 1:4:8 ( 1 Cement : 4 Fine / Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) . Cum 4340.00 4 Random Rubble Stone Masonry Work In Cement Mortar With Mechanical Mixer In Foundation ( At Any Level ) Complete As Per Drawing And Technical Specification And As Per Clause 1000 And 1400 Of Mort&H Specification Including All Scaffolding Material, Labour, Machinery But Excluding Pointing And Plastering In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Cum 4, 600.00 5 Earth Filling With Available Surplus Soil Excavated From Foundationsand Taken Only From Outside Of Building Plinth In Layers Not Exceeding20cm In Depth, Consolidating Each Deposited Layer Includingramming And Watering And Consolidation With Lead Up To 50 M And Liftupto 1.5 M. Cum 144.00 6 Random Rubble Dry Stone Kharanja ( Soling ) Under Floor. Cum 1838 7 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - All Work Upto Plinth Level :1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . Cum 5800 .0 8 Reinforcement For R.C.C. Work At All Levels Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete. 23.19.1Thermo-Mechanically Treated Bars. Kg 64.20 9 Centring And Shuttering With Plywood Or Steel Sheet Upto Two Stories Or Height Upto 7.5 Metre Above Plinth Level Including Strutting, Propping Etc. And Removal Of Form For : 22.1.1 Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. Sqm 162.00 10 Centring And Shuttering With Plywood Or Steel Sheet Upto Two Stories Or Height Upto 7.5 Metre Above Plinth Level Including Strutting, Propping Etc. And Removal Of Form For : Suspended Floors, Roofs, Landings, Balconies And Access Platform. Sqm 287.00 11 Reinforced Cement Concrete Work In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Upto Two Stories Excluding Cost Of Centring, Shuttering, Finishing And Reinforcement : 1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) Cum 5360.00 12 Reinforced Cement Concrete Work Inbeams, Suspended Floors, Roofs Having Slope Upto 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Two Stories Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement: M-20 Grade Concrete ( 1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) -As Per Design Mix ) Cum 7030 13 Precast Terrazo Tiles 20Mm Thick With Graded Marble Chips Of Size Upto 12Mm Laid In Floors, And Landings, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles Including Rubbing And Polishing Complete With Precast Tiles On 20Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement :4 Coarse Sand ) : 30.17.1 Light Shade Using White Cement. Sqm 964.00 14 Half Brick Masonry With Fps Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Two Stories. Cement Mortar 1:4 ( 1 Cement :4 Coarse Sand ) Sqm 704 15 Brick Masonry Work With First Class Fps Bricks ( Min. 10.5 Mpa ) In Cement Mortar With Mechanical Mixer In Substructure / Super Structure At All Levels Complete As Per Clause 1300 And 2200 Of Mort&H Specification Including All Material, Labour, Scaffolding Etc But Excluding Pointing And Plastering. In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Cum 4940 16 Cement Plastering Including T&P, Scaffolding, Material And Complete Labour, Including Cost Of Water, Curing, Racking Of Joints Etc. With 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 32.2.1 1:4 ( 1 Cement : 4 Fine / Coarse Sand ) Sqm 237.00 17 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete Sqm 184.50 18 Providing And Fixing Factory Made Isi Marked Steel Glazed Doors, Windows And Ventilators Side / Top / Centre Hung With Beading And All Members Such As F7d, F4b, K11 B And K12 B Etc. Complete Of Standard Rolled Steel Sections, Joints Mitred And Flash Butt Welded And Sash Bars Tenoned And Rivetted With 15X3mm Lugs, 10Cm Long, Embedded In Cement Concrete Blocks 15X10x10cm Of 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size ) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required, Including Providing And Fixing Of Hinges, Pivots, Float Glass Panes With Glazing Clips And Special Metal Sash Putty Of Approved Make And A Priming Coat Of Approved Steel Primer Excluding The Cost Ofmetal Beading And Other Fittings Except Necessary Hinges Or Pivots Complete As Per Approved Design. Sqm 3560 19 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded With 15X3 Mm Lugs 10Cm Long Embedded In Cement Concrete Blocks 15X10x10 Cm Of 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Or With Wooden Plugs And Screws Or With Dash Fasteneror Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Require Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. Kg 71.00 20 Steel Work Welded In Built Up Sections / Framed Work Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approvedsteel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. Kg 117.5 21 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: Two Or More Coats On New Work Over An Under Coat Of Suitableshadewithordinarypaint Of Approved Brand And Manufacture. Sqm 147.00 22 Providing And Fixing Fly Proof Galvanised M.S. Wire Gauze To Windows And Clerestory Windows Using Galvanised M.S. Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm.28.54.1 With 2Nd Class Teak Wood Beading 62X19 Mm. Sqm 919 23 Providing And Fixing 1St Quality Ceramic Glazed Vitrified Tiles Of Colour Standard White, Grey, Ivory, Fume, Red Brown, Light Green, Light Blue, And Other Light Shades With Water Absorbtion Less Than Or Equal To 0.08% Confirming To Is : 13753 & Is : 15622 In Floor, Steps Etc Laid On Bed On Neat Cement Slury Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete ( Excluding The The Cost Ofcement Plaster On Wall And Pillar ) 27.18.1 Size 600Mm X 600Mm Sqm Sqm 1, 529.00 24 Providing And Fixing 1St Quality Standard White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 & Is :15622 Of Size 200Mm X 300Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete ( Excluding The Cost Of Cement Plaster On Walls And Pillar ) . Sqm 837 25 Forming Groove Of Uniform Size In The Top Layer Of Washed Stone Grit Plaster As Per Approved Pattern Using Wooden Battens, Nailed To The Under Layer Including Removal Of Wooden Battens, Repair To The Edges Of Panels And Finishing The Groove Complete As Per Specifications And Direction Of The Engineer-In-Charge :15 Mm Wide And 15 Mm Deep Groove Metre 33.50 26 Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal Dehyderesinin Glue Both Sides Including Approved Isi Marked Stainless Steel Butt Hinges Fittings With Necessary Screws Complete As Per Annexure A: 28.24.1 25 Mm Thick28.24.1.1 Commercial Veneer Both Side Sqm 1530.00 28.24.1.2 Decorative Teakveneer One Sidesqm 1530.00 27 P & F Of Iron Hook / Clamp 40 Mm X 5 Mm M.S. Flat Complete With Nut & Bolt Etc. As Required. Each 54.00 28 P & F 1.6 Mm Thick M.S. Recessed Fan Box, Hexagonal / Round Of Size 100 Mm Dia, Depth 75Mm, 12 Mm Dia Rod Fan Hook With 100 Mmlength Extended On Each Side . Each 114.00 29 P & F Double Ball Bearing Capacitor Start Ceiling Fan Of Approved Make Complete With Regulator And Other Accessories As Required. ( For Estimation Purpose Only ) 55.4.1 900 Mm Sweep Each 1481.00 30 Providing & Fixing Of 240 / 415 V Ac Mcb With Positive Isolation Of Breaking Capacity Not Less Than 10 Ka ( B / C Tripping Characteristic As Per Type Of Load And Site Requirement ) 4Kv Impulse Withstand Voltage, As Per Pwd Specification For Electrical Works With Isimarked Is 8828 ( 1996 ) / Conforming To Iec 60898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Of Class 3 As Per Iec, Minimum Phase Termination Capacity Of 35Sq.Mm. , Conductorline Load Reversibility, Label Holding Facility , Ip 20 Contact Protection And Fitted With Existing Distribution Board / Sheets, Min. Operation 20, 000 Upto 32 A Rating And 10, 000 Upto 63 A, 5000 For 80 A Rating Including Making Connections, Testing Etc. As Required. . Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Test Reports Before Execution & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr .Double Pole Mcb 50-63 A Rating Each 686.00 31 Wiring Of Light Point / Fan Point / Exhaust Fan Point / Call Bell Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade ( Is:694 ) And 1.5 Sq. Mm Nominal Size Frpvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade ( Is:694 ) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & ItS All Accessories ( J.B. , Bends Etc. ) , Round Tiles, 18 Swg G.I. Box With Earth Terminal, 6 A Switch , 3 Pinceiling Rose / Lamp Holder / 3 Point Connector, 3.0 Mm Thick Isi Marked Phenolic Laminated Sheet ( Is : 2036 - 1995 ) , Al. Alloy / Cadmium Plated Iron Screws 20 Mm Cup Washers Etc. All As Per Pre Approved By Engineer In Charge, Making Connections, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical / Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 . For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr .E010101 Short Point ( Up To 3 Mtr. ) P. Point 190.00E010102 Medium Point ( Up To 6 Mtr. ) P. Point 320.00E010103 Long Point ( Up To 10 Mtr.. ) P. Point 431.00 32 Medium Point ( Up To 6 Mtr. ) P. Point 320 33 Long Point ( Up To 10 Mtr.. ) P. Point 431 34 Wiring Of 3 / 5 Pin 6 Amp. Light Plug Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade ( Is:694 ) And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade ( Is:694 ) Inrecessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & ItS All Accessories ( J.B. , Bends Etc. ) , Round Tiles, 18 Swg Hot Dipped Galvanized Modular Box With Earth Terminal, 6 A Modular Switch, 3 / 5 Pin 6 A Modular Socket, Modular Face Platewith Grid Plate, Screws Etc, All As Per Pre Approved By Engineer In Charge, Making Connections, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical / Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07.For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr . E010701 On Board P. Point 253.00 35 Wiring Of 6 Pin 15 Amp. Light Power Point With 4.0 Sq. Mmpvc Insulated Unsheathed Solid / Stranded Copper Conductor 1.1 Kv Gradeof Approved Makein Surface / Recessed Isi Marked Pvc Conduit & ItS Accessories, 18 Swg M.S. Box With Earth Terminal, Screwless Cage Connectors For Neutral Looping In Switch Board, 15 Aswitch, 15 A Socket, 3.0 Mm Thick Phenolic Laminated Sheet, Zinc Plated / Brassscrews, Cup Washers, Bushes, Check Nuts, Making Connections, Testing Etc. As Required.42.5.1 Short Point ( Up To 3 Mtr. ) P. Point 439.00Power Point 36 P & F Box Type Fluorescent Tube Fitting Fabricated From Crca Sheet And Finished With Powder Coating / Stove Enamelled Paint Complete With Accessories Like ( Occb, Starter, Starter Seat ) / Eb, Condensor, Rotor Holder, Terminal Block Duly Prewired With Copper Conductor Including Making Connection, Testing Etc. As Required. ( Without Tube ) 57.2.1 1 X 36 Watts With Occb Each 792.00 37 47.11 P & F Isi Marked 6 Amp Bakelite Batten / Angle Holder Including Making Connection Testing Etc. As Required. Each 27 38 P & F Two Pin Energy Efficient Compact Fluorscent Lampin Existing Holder / Fixture As Required. 7 / 9 Watt Each 60.00 39 Providing And Fixing Magnetic Catcher In Cupboard / Ward Robe Shutters Including Fixing With Necessary Screws Etc. Complete ( Best Make Of Approved Quality. 28.117.1 Triple Strip Vertical Type. Each 27.50 40 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Single Socketed Pipes Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming Tois : 5382 Leaving 10 Mm Gap For Thermal Expansion. 31.41.2 110 Mm Diameter Metre 253.00 41 Providing And Fixing 25 Mm Thick Shutters For Cupboards Etc. Including Isi Marked Black Enamelled M.S. Butt Hinges With Necessary Screws : 28.23.1 Panelled Or Panelled And Glazed Shutters 28.23.1.1 Second Class Teak Wood Sqm 2480.00 42 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50x50mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) And Making Good The Wall Etc. Complete. 31.43.2 110 Mm Each 173.00 43 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outletand Overflow Pipes But Without Fittings And The Base Support For Tank Per Litre 8.80 44 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required : 36.1.1 White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440mm With Integral Type Foot Rests. Each 4, 775.00 45 Providing And Fixing C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms. 34.49.1 15 Mm Nominal Bore. Each 666.00 46 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks Of Class Designation 75 And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design.With Bricks Each 14400.00 47 Providing & Fixing Of Isi Marked ( Is : 15778 - 2007 ) Rigid Cpvc Drain Water Piping 6 Kg / Cm2 With Fittings Like Elbow, Soket, Tee Etc & Support With Ms Hanger On Ceiling Or Recessed In Wall With Chasing & Plastering With 6 Mm Thick Closed Cell Elastomeric Nitrile Rubber Insulation Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr E222501 20 Mm Dia Mtr. 183.00 E222502 25 Mm Dia Mtr. 229.00 48 Construction Of Tube-Well Upto 100 Meter Depth And Above In All Type Of Rocks By Dth System And Over Burden To Accommodate Casing Pipe Of Following Sizes In All Types Of Soils And Over Burden Including Lowering Of Casing Pipes But Excluding Cost Of Casing Pipes As Per Is : 2800 ( Part I & Ii ) 1979 Specifications. The Work Would Be Completed After Obtaining Sand Free Water. The Tube Well Should Have A Throughout Bore As Per Nominal Dia Of Casing Pipe:200 Mm Dia Nominal Bore 49 Supply Of Erw M.S. Black Casing Pipe Isi Marked ( Is: 4270 / 1992 ) Of Grade Fe410 Of Following Nominal Bore Sizes At Site Of Work.200 Mm Dia 50 Supply Of Strainer Pipes Made Of Erw M.S. Black Pipe Isi Mark Of Following Sizes At The Site Of Work Including Required Size Of Slotting As Per Is:8110-1985 Of Following Nominal Bore Sizes At Site Of Work.200 Mm Dia 51 Providing & Lowering Of G.I. Flange Pipe B Class Including Rubber Washer And Nuts Of 8 Mm Dia Complete In All Respect. 50 Mm Dia 52 Supply And Fixing Of M.S. Clamp Set Of 50 ×6Mm Flat Iron With Nutsand Bolts Etc. For Holding The Riser Pipe Assembly Of Submersiblepump Set. Each Set 287.00 53 Installation Of Submersible Motor Pump Set In Tube-Well / Open Wellcomplete ( Labour Charges Only ) Including Transportation Of Tripod, Chain Pulley Block & Any Other Material Required For Loweringpurpose. Each 5, 012.00 54 Supply And Fixing Of Tube Well Cover Of M.S. Sheet ( 6Mm Thick ) Withnuts And Bolts Complete For Casing Size:200 Mm Dia Each 277.00 55 Supplying And Laying Isi Marked P.V.C. Insulated Submersiblecable As Per Pwd Specification For Electrical Works Confirming To Is:694 And As Per Is 8130 : 2013 Of 1.1 Kv Grade .Wire Should Be Made From 99.99% Purity Copper, Class 5 Stranding In Acc. To Iec 60228 For Lower Watt Loss , Oxygen Free ( <10 Ppm ) For Less Chances Of Oxidization And Higher Silver Content For Gives Better Conductivity , Insulation Pvc Type A Or C , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Vde 0298 Part 4 Including Making Connection Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. All As Per Pre Approved By Engineer In Charge, Making Connections. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr 10.0 Sq.Mm 3 Core Flat / Round Mtr. 302.00 56 Upto 3.7 Kw Dol Starter Feeder With Mcb, Main And Auxcontactor, O / L Relay, L / R Selector Switch, 3 Indicating Lamps, Start- Stop Push Button , Control Mcb Size : 600 ( W ) X 400 ( H ) X 600 ( D ) Each 22, 862.00 57 Supply Installation Testing & Commissioning Of Radial / Mixed Flow Isi Marked Water Filled Submersible Motor Pump Sets Suitable For 100 / 150Mm Dia Borewell. The Size Of Adopter Fixed On Top Of The Motor Should Exceed The Top Of Coupler , For Safegaurd The Coupler. The Construction Material Of Motor And Pump Should Match Is: 8034:2018 And Is 9283 Guideline. The Radial Flow Pumpset Should Operate At 5 Star Energy Efficiency Level Of Bee And Mixed Flow Pump Set Should Operate At 3 Star Energy Level Of Bee, Accompained By Valid Bee Certificate. Motor Should Be Ie2 Class As Per Iec 60034-2-1: 2007, Iec 60034-30: 2008, & Is12615:2011 With Required Accessories Including Making Connection Suitable For Bore Well. The Job Includes Labour Part Of Lowering Of Riser Pipe G.I. / H.D.P.E. With Rope, Cables & Pump, Installation Of Complete Fitting And Accessories, Jointing Of Electrical Cables Up To Switch Board. All Labour For Testing Of Submersible Pumps Set And Supply Of Water To Water Mains, Complete In All Respect . All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr .7.5 Hp, 3-Ø, ( 76 - 96 ) Mtr, ( 285-180 ) Lpm Each 46, 532.00 58 Clearing And Grubbing Road Land Including Uprooting Rank Vegetation, Grass, Bushes, Shrubs, Saplings And Trees Girth Up To 300 Mm, Removal Of Stumps Of Trees Cut Earlier And Disposal Of Unserviceable Materials And Stacking Of Serviceable Material To A Lead Of 50 Metres From Road Boundary Including Removal And Disposal Of Top Organic Soil Not Exceeding 150 Mm In Thickness As Directed By Engineer. 2.3.1 In Area Of Light Jungle Hectare 56, 000.00 59 Providing & Fixing Of Hdpe Pipe Isi Mark ( Is:4984 / 2016 ) For Watersupply ( Suitable For Submersible & Jet Pump ) With Required Fittings Iesocket, Elbows, Tee Etc. Complete In All Respect. All As Per Preapproved By Engineer In Charge. For Additional Technicalparameters Of Products / Work , Refer Annexure A Attached Withthis Bsr 50 Mm Od 6 Kg / Cm2 Mtr. 98.00 60 Earth Work In Excavation In Foundation, Trenches Etc. Including Dressing Of Sides And Ramming Of Bottoms, Including Getting Out The Excavated Material, Refilling After Laying Pipe / Foundation And Disposal Of Surplus Excavated Material At A Lead Upto 50M Suitable Site As Per Direction Of Engineer For Following Depths, Below Natural Ground / Road Top Level.4.10.1 In All Types Soils / Saturated Soil Such As Moorum, Sand, Sandy Silt, Clay, Black Cotton Soil, Kankar, Etc.4.10.1.1 Depth Upto 1.5 M Cum 61 Random Rubble Stone Masonry Work In Cement Mortar With Mechanical Mixer In Foundation ( At Any Level ) Complete As Per Drawing And Technical Specification And As Per Clause 1000 And 1400 Of Mort&H Specification Including All Scaffolding Material, Labour, Machinery But Excluding Pointing And Plastering In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Cum 4, 600.00 62 Construction Of Embankment With Approved Materials Deposited At Site Available From Roadway Cutting And Excavation From Drain And Foundation Of Other Structures, Graded And Compacting By Vibratory Roller 8-10 Tonne To Meet Requirement Of Table 300-2 As Per Mort&H Specification Clause 305. Cum 77.5 63 Random Rubble Dry Stone Kharanja ( Soling ) Under Floor. Cum 1, 838.00 64 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - All Work Upto Plinth Level : 1:4:8 ( 1 Cement : 5 Fine / Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) Cum 4340.00 65 Providing And Laying Un-Reinforced, Dowel Jointed, Plain Cement Concrete Mix With Concrete Mixer & Vibrator Pavement Over A Prepared Sub Base With 43 Grade Cement , Coarse And Fine Aggregate Conforming To Is: 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed As Per Approved Mix Design, Laid, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Primer, Joint Sealant, Debonding Strip, Admixtures ( If Required ) As Approved, Curing Compound, Finishing To Lines And Grades Complete As Per Drawing And As Per Clause 602, 112 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. 9.5.1 Pcc M-20 Cum 5, 550.00 66 Centring And Shuttering With Plywood Or Steel Sheet Upto Two Stories Or Height Upto 7.5 Metre Above Plinth Level Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Columns, Pillars, Piers, Abutments, Posts And Struts. Sqm 345.00 67 Reinforcement For R.C.C. Work At All Levels Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete. 23.19.1 Mild Steel And Medium Tensile Steel Bars. Kg 64.20 68 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Two Stories Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement:M-20 Grade Concrete ( 1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) -As Per Design Mix ) Cum 7, 030.00 69 Steel Work Welded In Built Up Sections / Framed Work Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approvedsteel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. Kg 117.5 By Using 4*2 / 1.5 Hollow Section Rectangle 70 Providing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead And Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 31.1.1 1.00Mm Thick With Zinc Coating Not Less Than 275Gm / M² Sqm 1, 147.000.80Mm Thick With Zinc Coating Not Less Than 275Gm / M² Sqm 982.00 71 Providing And Fixing Of Precast Concrete Interlocking Tiles Of Desired Shape Of M 30 Grade Manufactured From Fully Computerized Automatic Stationery Hydraulic Viebro Pressed Machine And Fully Computerized Automatic Batching Plant Of Class A1 / A2 As Per Bs 6717:2001. The Cc Interlocking Paving Blocks Be Laid On Average 50Mm. Thick Bed Of Coarse Sand And The Joint Is To Be Filled With Fine Sand. Laying Procedure On Compacted Sub-Base As Defined.Complete Job Is To Be Executed As Per The Instruction Of Engineer Incharge. The Rates To Be Inclusive Of All Lead & Lifts Etc. Complete As Per Specifications. Tensile Splitting Strength, Abrasion And Braking Load Etc. As Per Bs 6717:2001, Grey Cement.9.10.1 60Mm Thick Sqm 516.009.10.2 80Mm Thick Sqm 578.009.10.3 100Mm Thick Sqm 641.00 72 Brick Work With Fps Bricks Of Class Designation 75 In Foundation And Plinth In: 24.1.2 Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) Cum 4940.000 73 Half Brick Masonry With Fps Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Two Stories. Cement Mortar 1:4 ( 1 Cement :4 Coarse Sand ) Sqm 704.00 Alamiraah 74 Supply And Planting Following Species Best Quality Container Grown Healthy Trees Of 2 Mt. Min. Height, Well Established & Free From Disease At Site In 0.90 M Dia Holes, 1 M Deep Dug In The Ground, Mixing The Soil With Decayed Farm Yard / Sludge Manure, Backfillingthe Hole Watering Etc As Required Neem ( Azadirachta Indica ) Each 1, 057.00 75 Cement Plastering Including T&P, Scaffolding, Material And Complete Labpour, Including Cost Of Water, Curing, Racking Of Joints Etc. With 20 Mm Cement Plaster Of Mix :32.3.1 1:3 ( 1 Cement : 3 Fine / Coarse Sand ) Sqm 228.00 76 Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Un Armoured / Armoured Aluminium Cable Of 1.1 Kv Grade As Perpwd Specification For Electrical Works In Existing Rcc / Hume / Stoneware / Pvc Pipe / Open Duct / Cable Trench With Filling Ofexcavated Earth In Trench , On Existing Cable Trays Or On Surface Etc. Including Making Necessary Connection, Testing Etc. As Required Ofsize And As Per Points ( A ) , ( B ) , ( C ) , Mentioned Below:- ( A ) Material :- H4- Grade Aluminium Conductor Of Purity >99.6 % &As Per Is:1554 P-I / Is :7098 P – I ( B ) Conductor Shall Have Electrolytic Aluminium Confirming To Is8130, Is 3975-1999 For Armouring Of Cables In Armoured Cableitems , Is 5831 For Sheath, Is 10810 ( Part 0 To 64 ) For Testing Procedures. ( C ) Oem Must Have Iso 9001 & 14001 Certifications For Qualityassuarance & Its Own In House Nabl Lab Setup For All Testingfacilities For Cables . Appropriate Type Test Certificate / Oem Testreport Shall Be Submitted . All Above As Per Pre Approved Byengineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr.E110130 Armoured Cable 16.0 Sq. Mm 3 Core Mtr 107.00 77 Supplying And Fixing Of Gi Chain Link Fencing Of Required Width Inmesh Including Strengthening With 2 Mm Dia Gi Wire / G.I. Staples / G.I.U-Nails / Nuts Bolts With 2.4 M Angle Iron Posts 50 Mm X 50 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete 30Cmx30cmx60cm, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Bestrutted On Both Sides And End Post On One Side Only Etc Completeas Required And As Per Direction Of Engineer-In-Charge.10.16.1 Mesh Size 50Mm X 50Mm Made Of Gi Wire 3.15Mm Dia Sqm 721.00

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	09-Mar-2023	DATE EXTEND	Date	16-03-2023

INR 1000 /-

INR 118100.0 /-

Refer document

Name of Work: CONSTRUCTION OF MATERIAL RECOVERY FACILITYSTRUCTURE ATDUMPIMG YARD KHAIRTHAL

Sl. No.	Item Description
1	Laying and Jointing PVC Pipe. Heading
2	Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.4.10.1 In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. 4.10.1.1 Depth upto 1.5 m cum 210.50
3	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size). cum 4340.00
4	Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering In cement mortar 1:4 (1 cement : 4 coarse sand) cum 4,600.00
5	Earth filling with available surplus soil excavated from foundationsand taken only from outside of building plinth in layers not exceeding20cm in depth, consolidating each deposited layer includingramming and watering and consolidation with lead up to 50 m and liftupto 1.5 m. cum 144.00
6	Random rubble dry stone Kharanja (soling) under floor. cum 1838
7	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). cum 5800 .0
8	Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. 23.19.1Thermo-Mechanically Treated bars. kg 64.20
9	Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : 22.1.1 Foundations, footings, bases of columns, etc. for mass concrete. sqm 162.00
10	Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform. sqm 287.00
11	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) cum 5360.00
12	Reinforced cement concrete work inbeams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix) cum 7030
13	Precast terrazo tiles 20mm thick with graded marble chips of size upto 12mm laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 30.17.1 Light shade using white cement. sqm 964.00
14	Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:4 (1 cement :4 coarse sand) sqm 704
15	Brick masonry work with First class FPS bricks (min. 10.5 Mpa) in cement mortar with mechanical mixer in substructure/ super structure at all levels complete as per clause 1300 and 2200 of MoRT&H specification including all material, labour, scaffolding etc but excluding pointing and plastering. In cement mortar 1:4 (1 cement : 4 coarse sand) cum 4940
16	Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix : 32.2.1 1:4 (1 cement : 4 fine/ coarse sand) sqm 237.00
17	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete sqm 184.50
18	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost ofmetal beading and other fittings except necessary hinges or pivots complete as per approved design. sqm 3560
19	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fasteneror rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. kg 71.00
20	Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 117.5
21	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitableshadewithordinarypaint of approved brand and manufacture. sqm 147.00
22	Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm.28.54.1 With 2nd class teak wood beading 62X19 mm. sqm 919
23	Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the the cost ofcement plaster on wall and pillar)27.18.1 Size 600mm x 600mm sqm sqm 1,529.00
24	Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). sqm 837
25	Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :15 mm wide and 15 mm deep groove metre 33.50
26	Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure "A": 28.24.1 25 mm thick28.24.1.1 Commercial Veneer both side sqm 1530.00 28.24.1.2 Decorative teakveneer One sidesqm 1530.00
27	P & F of iron hook/clamp 40 mm x 5 mm M.S. flat complete with nut & bolt etc. as required. each 54.00
28	P & F 1.6 mm thick M.S. Recessed fan box, hexagonal/ round of size 100 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . each 114.00
29	P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only) 55.4.1 900 mm sweep each 1481.00
30	Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C tripping characteristic as per type of load and site requirement) 4KV impulse withstand voltage, as per PWD specification for electrical Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. . OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .Double pole MCB 50-63 A rating Each 686.00
31	Wiring of light point/ fan point/ exhaust fan point/ call bell point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & it"s all accessories( J.B. , Bends etc.) , round tiles,18 SWG G.I. box with earth terminal, 6 A switch , 3 pin ceiling rose/ Lamp holder / 3 point Connector, 3.0 mm thick ISI marked phenolic laminated sheet (IS : 2036 - 1995), Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 . For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .E010101 Short point (up to 3 mtr.) P. point 190.00 E010102 Medium point (up to 6 mtr.) P. point 320.00 E010103 Long point (up to 10 mtr..) P. point 431.00
32	Medium point (up to 6 mtr.) p. point 320
33	Long point(up to 10 mtr..) p. point 431
34	Wiring of 3/5 pin 6 amp. Light plug point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & it"s all accessories( J.B. , Bends etc.) , round tiles, 18 SWG Hot Dipped Galvanized Modular Box with earth terminal, 6 A modular switch, 3/ 5 pin 6 A modular socket, Modular face plate with grid plate, screws etc,all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . E010701 On board P. point 253.00
35	Wiring of 6 pin 15 amp. Light power point with 4.0 sq. mmPVC insulated unsheathed solid / stranded copper conductor 1.1 kV gradeof approved makein surface / recessed ISI marked pvc conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board, 15 Aswitch, 15 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, bushes, check nuts, making connections, testing etc. as required.42.5.1 Short point (up to 3 mtr.) p. point 439.00POWER POINT
36	P & F box type fluorescent tube fitting fabricated from CRCA sheet and finished with powder coating / stove enamelled paint complete with accessories like (OCCB, starter, starter seat)/ EB, condensor,rotor holder, terminal block duly prewired with copper conductor including making connection, testing etc. as required. (without tube)57.2.1 1 X 36 Watts with OCCB each 792.00
37	47.11 P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. each 27
38	P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required. 7/9 watt each 60.00
39	Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality. 28.117.1 Triple strip vertical type. each 27.50
40	Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming toIS : 5382 leaving 10 mm gap for thermal expansion. 31.41.2 110 mm diameter metre 253.00
41	Providing and fixing 25 mm thick shutters for cupboards etc. including ISI marked black enamelled M.S. butt hinges with necessary screws : 28.23.1 Panelled or panelled and glazed shutters 28.23.1.1 Second class teak wood sqm 2480.00
42	Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 31.43.2 110 mm each 173.00
43	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank per litre 8.80
44	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 36.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. each 4,775.00
45	Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 34.49.1 15 mm nominal bore. each 666.00
46	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With bricks each 14400.00
47	providing & Fixing of ISI marked (IS : 15778 - 2007) Rigid CPVC drain water piping 6 kg/ cm2 with fittings like elbow, soket, Tee etc & support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/work , refer Annexure "A" attached with this BSR E222501 20 mm dia Mtr. 183.00 E222502 25 mm dia Mtr. 229.00
48	Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe:200 mm dia Nominal bore
49	Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/1992) of grade Fe410 of following nominal bore sizes at site of work.200 mm dia
50	Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985 of following nominal bore sizes at site of work.200 mm dia
51	Providing & lowering of G.I. flange pipe B Class including rubber washer and nuts of 8 mm dia complete in all respect. 50 mm dia
52	Supply and fixing of M.S. clamp set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. Each set 287.00
53	Installation of submersible motor pump set in tube-well/open well complete (labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose. each 5,012.00
54	Supply and fixing of tube well cover of M.S. sheet (6mm thick) with nuts and bolts complete for casing size:200 mm dia each 277.00
55	Supplying and Laying ISI marked P.V.C. insulated submersible cable as per PWD specification for electrical Works confirming to IS:694 and as per IS 8130 : 2013 of 1.1 kV grade .Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A or C ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4 including making connection etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. All as per pre approved by Engineer in charge, making connections. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR 10.0 Sq.mm 3 core flat / Round Mtr. 302.00
56	Upto 3.7 KW DOL Starter Feeder with MCB, Main and Aux Contactor, O/L Relay, L/R Selector Switch,3 Indicating lamps, Start- Stop Push Button ,Control MCB Size : 600 (W) x 400 (H) x 600 (D) Each 22,862.00
57	Supply Installation testing & Commissioning of Radial / mixed flow ISI marked water filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034:2018 and IS 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect . All as per pre approved by Engineer in charge. For additional technical parameters of products/work , refer Annexure "A" attached with this BSR .7.5 HP, 3-Ø, (76 - 96)Mtr, (285-180) LPM Each 46,532.00
58	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by Engineer. 2.3.1 In area of light jungle hectare 56,000.00
59	Providing & Fixing of HDPE pipe ISI mark (IS:4984/2016 ) for watersupply (suitable for submersible & jet pump) with required fittings iesocket, elbows, tee etc. complete in all respect. All as per preapproved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure "A" attached withthis BSR 50 mm OD 6 kg / cm2 Mtr. 98.00
60	Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.4.10.1 In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.4.10.1.1 Depth upto 1.5 m cum
61	Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering In cement mortar 1:4 (1 cement : 4 coarse sand) cum 4,600.00
62	Construction of embankment with approved materials deposited at site available from roadway cutting and excavation from drain and foundation of other structures, graded and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 as per MoRT&H specification clause 305. cum 77.5
63	Random rubble dry stone Kharanja (soling) under floor. cum 1,838.00
64	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size) cum 4340.00
65	Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 9.5.1 PCC M-20 cum 5,550.00
66	Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 345.00
67	Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. 23.19.1 Mild steel and Medium Tensile steel bars. kg 64.20
68	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement:M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix) cum 7,030.00
69	Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 117.5 by using 4""*2/1.5"" hollow section rectangle
70	Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 31.1.1 1.00mm thick with zinc coating not less than 275gm/m² sqm 1,147.000.80mm thick with zinc coating not less than 275gm/m² sqm 982.00
71	Providing and fixing of precast concrete interlocking tiles of desired shape of M 30 grade manufactured from fully computerized automatic stationery hydraulic viebro pressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined.Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. Tensile splitting strength, abrasion and braking load etc. as per BS 6717:2001, Grey cement.9.10.1 60mm thick sqm 516.009.10.2 80mm thick sqm 578.009.10.3 100mm thick sqm 641.00
72	Brick work with FPS bricks of class designation 75 in foundation and plinth in: 24.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 4940.000
73	Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:4 (1 cement :4 coarse sand) sqm 704.00 alamiraah
74	Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required Neem(Azadirachta indica) each 1,057.00
75	Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix :32.3.1 1:3 (1 cement : 3 fine/ coarse sand) sqm 228.00
76	Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un armoured / Armoured aluminium cable of 1.1 KV grade as perPWD specification for electrical Works in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench with filling ofexcavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required ofsize and as per points (a), (b), (c), mentioned below:-(a) Material :- H4- Grade aluminium conductor of purity >99.6 % &as per IS:1554 P-I / IS :7098 P – I(b) conductor shall have electrolytic aluminium confirming to IS8130, IS 3975-1999 for armouring of cables in armoured cableitems , IS 5831 for sheath, IS 10810 (Part 0 to 64 ) for testing procedures.(c) OEM Must have ISO 9001 & 14001 certifications for qualityassuarance & its own in house NABL lab setup for all testingfacilities for cables . Appropriate type test certificate / OEM testreport shall be submitted . All above as per pre approved byEngineer in charge. For additional technical parameters of products/work , refer Annexure "A" attached with this BSR.E110130 Armoured Cable 16.0 Sq. mm 3 core Mtr 107.00
77	Supplying and fixing of GI chain link fencing of required width inmesh including strengthening with 2 mm dia GI wire/ G.I. staples/ G.I.U-nails/ nuts bolts with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete 30cmx30cmx60cm, 0.6 metre below ground level,every 15th post, last but one end post and corner post shall bestrutted on both sides and end post on one side only etc completeas required and as per direction of Engineer-in-charge.10.16.1 Mesh size 50mm x 50mm made of GI wire 3.15mm dia sqm 721.00