|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group-A |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 4 | Supplying and fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6& 15/16 amp socket outlet and 15/16 amp piano type switch, connection, painting etc. as required. |
| 5 | Supplying and fixing following piano type switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch |
| 6 | b) 3 pin 5/6 A socket outlet |
| 7 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) Single pole |
| 9 | b) Double pole |
| 10 | Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and wateringpipe of 2.7 mtrs long etc. with charcoal or coke and salt complete as required. |
| 11 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top with 85 mm dia 6 mm thick GI base plate including holes etc complete as required. |
| 12 | Jointing of copper/GI tape ( with another copper/GI tape, base of the finial or any other metallic object) by reveting/ nut bolting/ sweating and soldering etc as required. |
| 13 | Providing and fixing of GI tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required ( For vertical run) |
| 14 | Providing and fixing testing joint, made of 20 mm x 3 mm thick GI strip, 125 mm long, with 4 nos of GI bolts, nuts, check nuts and spring washers etc compete as required. |
| 15 | Providing and laying GI tape 32 mm x 6 mm from earth electrode directly in ground as required. |
| 16 | Supplying and erection of glavanised \"D\" iron clamps complete with shackle insulator (75 mm x 90 mm), G. I. Bolts, nuts and washers, coach screws etc as required. |
| 17 | Supplying and fixing 4 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) |
| 18 | Supplying & laying of one numberXLPE insulated and PVC sheathed, un-armoured aluminium power cable of 1.1 KV Grade of size 3X16 Sq. MM conf to IS: 7098 (Part-I) in open with 10 SWG GIwire as support of cable in the open etc as required. |
| 19 | Supplying and fixing of 400 mm electric type wall fan suitable for single phase, 50 Hz, 230 volts, AC supplyincluding connections etc. as required. |
| 20 | Supplying and fixing decorative wall light (Wall baracket), fixture, made up of poly carbonate, suitable with 9 W LED lamp B22 base including 1x 9 watt LED lamp & making connections etc. as required. |
