Tender For Construction Of Office Building And Conference Hall At Hantapara Gram Panchayat Office Sansad Viii (Converjence). Activity Id - 58264869. Fund - (Institutional Strengthening Of Gram Panchayats Project (Isgpp).
Tender Value
4.26 Lakhs
Estimated cost
Bid Submission
02 Mar 2023
0 days left
EMD
8540
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office Building And Conference Hall At Hantapara Gram Panchayat Office Sansad Viii ( Converjence ) . Activity Id - 58264869. Fund - ( Institutional Strengthening Of Gram Panchayats Project ( Isgpp ) .
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Feb-2023 | TENDER TITLE | Other | 02-Mar-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs. in grond floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. Mtr. |
| 2 | \"Supplying, fitting and fixing windows and ventilators with or without integrated grillsconforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.\" (a) Fixed type steel windows as per IS sizes with horizontal glazing bars. |
| 3 | \"Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)\" (ii) 4 mm thick |
| 4 | \"M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size,fabrication ith necessary metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brandconforming to IS:814- 2004, haulage, hoisting and erection allcomplete.The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. \" i) For trusses spanning up to 12.00 m |
| 5 | \"Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap.(Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)\" \"(i) In Roofb) With 0.63 mm thick sheet\" |
| 6 | \"Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)\" \"(A) 300 mm lapping each wayb) With 0.63 mm thick sheet\" |
| 7 | a) Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) (iii) 35mm thick shutters with 19mm thick panel of size 30to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 8 | a)Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesiv eetc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. |
| 9 | a) Priming one coat on steel or other metal surface with synthetic oil bound primer ofapproved quality including smoothening surfaces by sand papering etc. |
| 10 | \"(A) Painting with best quality synthetic enamel paint of approved make and brandincluding smoothening surface by sand papering etc. including using of approvedputty etc. on the surface, if necessary :\" (b) On steel or other metal surface : (iv) Two coats (with any shade except white) |
| 11 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification. |
| 12 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors including borders to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide of required to match colour of tiles including roughening of concrete surfacce, if nedessary or by synthetic adhesive & grout materials etc. In 1st Floor( Wall & Floor Tiles) |
AI Tender Summary
Tender Timeline
Feb 25, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 02, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender