Tender For Supply Installation Testing Commissioning Of Equipments For Electronic Workshop (Experimentation And Innovation), Delhi-Delhi

Tender For Supply Installation Testing Commissioning Of Equipments For Electronic Workshop ( Experimentation And Innovation ) Supply And Installation Of Baby Vice 6-8In Of Bosch, Stanley, Taparia Or Makhita Make Complete As Required And As Per Direction Of Engineer-In-Charge 2 Supply And Installationof Dremel Workstation For Drilling Of 12000Rpm Of 3M, Stanley, Bosch, Tapariaand As Per Direction Of Engineer-In-Charge. 3 Supply Of Precision Screw Driver Set Of All Sizers Kitof 3M, Stanley, Bosch, Tapariamake Etc Complete As Required And As Per Direction Of Engineer-In-Charge 4 Supply Of Wire Stripper Cutter Plierof 3M, Stanley, Bosch, Tapariamake Etc Complete As Required And As Per Direction Of Engineer-In-Charge 5 Supply Of Hot Glue Gun Of250 Wbosch Or Makita / Black & Deckerequivalent Make And As Per Direction Of Engineer-In-Charge 6 Supply Of Heat Gun Of 500W Bosch Or Makita / Black & Deckerequivalent Make And As Per Direction Of Engineer-In-Charge 7 Supply Of Electric Screw Driver Set -Bosch, Black & Deckerof Bosch Or Dewalt Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 8 Supply Of Digital Pen Tester Of 12-1000 Vbosch, Black & Deckerof Bosch Or Dewalt Or Equivalent Make And As Required And As Per Direction Of Engineer-In-Charge 9 Supply Of Digital Multi Meter Of Bosch, Black & Deckerof Bosch Or Dewalt Or Equivalent Make And As Required And As Per Direction Of Engineer-In-Charge 10 Supply Of Acrylic Benderof Size 8-20Mm , 2.5Ft 150Mm Of Reputed Make And As Required And As Per Direction Of Engineer-In-Charge 11 Supply Of Soldering Station Of200w Weller, Hakko Make And As Required And As Per Direction Of Engineer-In-Charge 12 Supply Of 12-18 Inch Hacksaw Of Bosch, Black & Deckerof Bosch Or Dewalt Or Equivalent Make And As Required And As Per Direction Of Engineer-In-Charge 13 Supply Of 12-18 Inch Hand Saw Of Bosch, Black & Decker Of Bosch Or Dewalt Or Equivalent Make And As Required And As Per Direction Of Engineer-In-Charge 14 Supply Of Chisel Set Of Stanley, Vonhaus, Inwin Make And As Required And As Per Direction Of Engineer-In-Charge 15 Supply Of Mallet Of Reputed Make And As Required And As Per Direction Of Engineer-In-Charge 16 Supply Of Ball Pen Hammer Ofstanley / Black & Deckermake And As Required And As Per Direction Of Engineer-In-Charge 17 Supply Of Pliers Of Stanley / Inwinmake And As Required And As Per Direction Of Engineer-In-Charge 18 Supply Of Service Drivers Set Of Stanley / Pittsburghmake And As Required And As Per Direction Of Engineer-In-Charge 19 Supply Of Spanners Set Ofbosch / Stanleymake And As Required And As Per Direction Of Engineer-In-Charge 20 Supply Of Files Set Of Stanley / Pittsburghmake And As Required And As Per Direction Of Engineer-In-Charge 21 Supply Of Rasps Set Of Black& Decker / Stanleymake And As Required And As Per Direction Of Engineer-In-Charge 22 Supply Of Alen Keys Set Ofstanleymake Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 23 Supply Of 5 Mtr Measuring Tape Ofstanley / C.Kmake Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 24 Supply Of Measuring Tape Ofstanley / C.Kmake Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 25 Supply Of Stanley Ratcheting Screwdriver Setof Equivalent Make And As Per Direction Of Engineer-In-Charge. 26 Supply Of 2Mm To 20Mm Rivet Gun Of Yato Make Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 27 Supply Of 12 Inch Vice Of Bosch, Stanley, Taparia Or Makhita Makeand As Per Direction Of Engineer-In-Charge. 28 Supply Of Tapping Set Of Bosch, Stanley, Taparia Or Makhita Makeand As Per Direction Of Engineer-In-Charge. 29 Supply Of All Sizes Safety Glasses Of Bosch, Stanley, Taparia Or Makhita Make Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 30 Supply Of All Sizes Workshop Gloves Of Bosch, Stanley, Taparia Or Makhita Make Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 31 Supply Of All Sizes Workshop Apron Of Bosch, Stanley, Taparia Or Makhita Make Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 32 Supply Of0.5Mm To 18Mm Table Drill Of Bosch, Stanley, Taparia Or Makhita Make Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 33 Supply Of4 Inch To 10 Inch Angle Grinder And All The Attachments Ofbosch, Stanley, Black & Decker, Dewalt Make Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 34 Supply Of650w, Blade All Size Jigsaw And Its Bladesof Reputed Make And As Per Direction Of Engineer-In-Charge. 35 Supply Of4-8In, Blade All Size Circular Saw And Its Blades Ofbosch, Makita, Black & Decker, Dewalt Ofmake And As Per Direction Of Engineer-In-Charge. 36 Supply Of14-18In, Bits All Size Set, Drill And Drill Bits-Bosch, Black & Decker, Dewalt Ofmake And As Per Direction Of Engineer-In-Charge. 37 Supply Of1350w11500rpm Makita Wood Trimmer Of Reputed Make And As Per Direction Of Engineer-In-Charge. 38 Supply Of12000rpm Finishing Sander Of Makita Make Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 39 Supply Of12000rpm Electric Buffer Of Dewalt Make Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 40 Supply Of4-8In Disc Bosh Metal Cutter Of Reputed Make And As Per Direction Of Engineer-In-Charge. 41 Supply Ofphase: 3 Phase Working Voltage: 415, Mig Welding Ofhobart, Millermatic , Lincoln Ofmake And As Per Direction Of Engineer-In-Charge. 42 Supply Of350a Arc Welding Ofhobart, Millermatic, Lincoln, Make And As Per Direction Of Engineer-In-Charge. 43 Supply Of12-16Inch Metal Grinding Wheel Station - 3M, Stanley, Bosch, Taparia Make And As Per Direction Of Engineer-In-Charge. 44 Supply Of4-8 Inch Wood Grinding Machine Of Bosch Or Equivalent Make And As Per Direction Of Engineer-In-Charge. 45 Supply And Installation Ofco2laserengraving& Cutting Machine With Glass Laser Tube Of Size 4Ftx3ft With Laser Power 80W / 100W / 130W , Laser Source - Sealed Glass Co2 Laster Tuber, Travelling Speed- 600Mm / S, Reposition Accuracy 0.02Mm, Minimum Letter Size- 1.0Mm ( English Font ) , X Y Movement System- Belt Transmission, Z-Axis Movement- Automatic Upto 180 Mm ( Optional ) , Power Adjustment- 1 To 100%, Driving System- Stepper Motor / Servo Motor, Operating System- Win 7 / 8 / 10, 32 / 64 Bit, Computer Interface- Udisk, Usb, Ethernet, Supported Format- Plt, Dxf, Bmp, Jpg, Ai, Dwg, Bmp, Gif, Hpgl, Compatible Software- Coreldraw, Autocad, Photoshop, Tajima, Working Voltage- Single Phase 220-230V / 50Hz-60Hz, Operating Environment- 45ºc, Humidity 5%-80%, Memory Buffer- 128Mb, Fume Extraction System- External Exhaust System With Minimum Flow Rate 1200M3 / H ( Cfm 706 Ft3 / H ) . Connection Output 4Diameter, Overall Dimension ( L X W X H ) - 1450 X 1780 X 1070Mm, Weight- 332 Kg, Power Consumption- 2Kw All Completeor As Per The Direction Ofengineer In Charge 46 Supply And Installation Of 3Axis Cnc Engraving And Router Machine With Stepper Motor Of Outer Dimensions 2150 X 3300 X 1700, Working Area ( X, Y, Z ) 1300 X 2500 X 200Mm, Spindle 6Kw Air Cooled, Spindled Speed- 18000Rpm, Distance Between Bed & Gantry- 200Mm, Maximum Travelling Speed- 18Mtr / Min, Cutting Tool Diameter- 03 To 16Mm, Repeated Location- 0.025 Mm, Operating System- Dsp-Hand Held Controller, Driving System- Stepper Motor, Power Supply- Ac 420V / 3Ph, Weight ( Approx. ) - 970 Kg. Including Rotary And Dust Wiser Or All Other Accessories Required To Set Up The Machineall Complete Or As Per The Direction Of Engineer In Charge 47 Supply Ofall Size Kit Nails 20 Types Of Reputed Make And As Per Direction Of Engineer-In-Charge 48 Supply Ofall Size Kit Screws 20 Types Of Reputed Make And As Per Direction Of Engineer-In-Charge 49 Supply Ofall Size Kit Nut And Bolts 20 Types Of Reputed Make And As Per Direction Of Engineer-In-Charge 50 Supply Ofall Size Kit Rivet 10 Types Of Reputed Make And As Per Direction Of Engineer-In-Charge 51 Supply Ofall Size Kit Washers 20 Types Of Reputed Make And As Per Direction Of Engineer-In-Charge 52 Supply Of6-8 Inch Glue Sticks Of Reputed Make And As Per Direction Of Engineer-In-Charge 53 Supply Ofbasic And Advance Electronic Diy Kit Of Reputed Make And As Per Direction Of Engineer-In-Charge 54 Supply Ofbasic And Advance Mechanical Diy Kit Of Reputed Make And As Per Direction Of Engineer-In-Charge 55 Supply Ofbasic And Advance Mechatronic Diy Kit Of Reputed Make And As Per Direction Of Engineer-In-Charge 56 Supply Ofbasic And Advance Drones Diy Kit Of Reputed Make And As Per Direction Of Engineer-In-Charge 57 Supply Ofbasic And Advance Robotics Diy Kit Of Reputed Make And As Per Direction Of Engineer-In-Charge 58 Supply Ofbasic And Advance Steam Diy Kit Of Reputed Make And As Per Direction Of Engineer-In-Charge 59 Supply Of3d Printer As Per The Following Specifications:-Model- Ender-6, 250X250x400mm. Molding Tech-Fdm, Nozzle Number-1, Slice Thickness-0.1Mm-0.4Mm, Nozzle Diameter-Standard- 0.4Mm, Precision- ±0.1Mm , Filament- 1.75 Pla Filament , File Format- Stl / Obj / Amf, Working Mode- Storage Card Offline, Slice Software Creality Slicer / Cura / Repetier - Host / Simplify 3Dwith Total Power 350 W , Operating System - Windows Xp / 7 / 8 / 10 Mac / Linuxall Complete Or As Per The Direction Of Engineer In Charge 60 Supply Of3d Printer As Per The Follwing Specifications:- Exposure Screen: 13.6 Monochrome? Printing Accuracy: 6, 480 X 3, 600 Px ( 7K ) ? Contrast Ratio: 450:1? Light Source: Parallel Matrix ( Led Lights X 84 ) ? Build Plate: Laser Engraved Platform? Printing Speed: = 60 Mm / Hr? Control Panel: 4.3 Resistive Touch-Control? Data Input: Usb-A 2.0? Rated Power: 120W? Print Size: 300 X 298 X 164 Mm / 11.8 X 11.7 X 6.46 In. ( Hwd ) ? Printing Volume: 14.7 L / 498.5 Oz? Machine Size: 596 X 400 X 408 Mm / 23.5 X 15.7 X 16 In. ( Hwd ) ? Machine Weight: 21 Kg / 46.3 Lb 61 Supply Of3d Printer Of Extruder Type-Idex ( Independent Dual Extruders ) With Printing Precision- ±0.2Mm, Build Volume-300X250x200mm, Nozzle Diameter-0.4Mm ( 0.6 / 0.8Mm ) , Print Speed-10-150Mm / S, Maximum Extruder Temperature-320?, Platform Heating Temperature- 120?, Filament-Pla / Abs / Pa / Pc / Pva / Hips / Petg / Wood / Asa / Pacf All Completeor As Per Direction Of Engineer-In-Charge.

Refer document

INR 139816.0 /-

INR 69.90 Lakhs /-

Name of Work:SITC of equipments for Electronic workshop (Experimentation & Innovation)

Sl. No.	Item Description
1	Supply and installation of Baby Vice 6-8in of bosch, stanley, taparia or makhita make complete as required and as per direction of engineer-in-charge
2	Supply and installationof Dremel Workstation for drilling of 12000rpm of 3M, STANLEY, BOSCH, TAPARIAand as per direction of engineer-in-charge.
3	Supply of Precision Screw Driver Set of all sizers kitof 3M, STANLEY, BOSCH, TAPARIAmake etc complete as required and as per direction of engineer-in-charge
4	Supply of Wire Stripper Cutter Plierof 3M, STANLEY, BOSCH, TAPARIAmake etc complete as required and as per direction of engineer-in-charge
5	Supply of Hot glue gun of250 wBosch or Makita / Black & Deckerequivalent make and as per direction of engineer-in-charge
6	Supply of Heat Gun of 500w Bosch or Makita / Black & Deckerequivalent make and as per direction of engineer-in-charge
7	Supply of Electric Screw Driver Set -Bosch, Black & Deckerof Bosch or Dewalt or equivalent make and as per direction of engineer-in-charge.
8	Supply of Digital Pen Tester of 12-1000 VBosch, Black & Deckerof Bosch or Dewalt or equivalent make and as required and as per direction of engineer-in-charge
9	Supply of Digital Multi Meter of Bosch, Black & Deckerof Bosch or Dewalt or equivalent make and as required and as per direction of engineer-in-charge
10	Supply of Acrylic benderof size 8-20mm , 2.5ft 150mm of reputed make and as required and as per direction of engineer-in-charge
11	Supply of Soldering station of200w Weller, HAkkO make and as required and as per direction of engineer-in-charge
12	Supply of 12-18 inch Hacksaw of Bosch, Black & Deckerof Bosch or Dewalt or equivalent make and as required and as per direction of engineer-in-charge
13	Supply of 12-18 inch Hand saw of Bosch, Black & Decker of Bosch or Dewalt or equivalent make and as required and as per direction of engineer-in-charge
14	Supply of Chisel set of STANLEY, VONHAUS, InWin make and as required and as per direction of engineer-in-charge
15	Supply of Mallet of reputed make and as required and as per direction of engineer-in-charge
16	Supply of Ball Pen Hammer ofSTANLEY/Black & Deckermake and as required and as per direction of engineer-in-charge
17	Supply of Pliers of STANLEY/InWinmake and as required and as per direction of engineer-in-charge
18	Supply of Service drivers set of Stanley/PITTSBURGHmake and as required and as per direction of engineer-in-charge
19	Supply of Spanners set ofBosch/STANLEYmake and as required and as per direction of engineer-in-charge
20	Supply of Files set of Stanley/PITTSBURGHmake and as required and as per direction of engineer-in-charge
21	Supply of Rasps set of BLACK& DECKER/Stanleymake and as required and as per direction of engineer-in-charge
22	Supply of Alen keys set ofStanleymake or equivalent make and as per direction of engineer-in-charge.
23	Supply of 5 mtr Measuring tape ofStanley/C.Kmake or equivalent make and as per direction of engineer-in-charge.
24	Supply of Measuring tape ofStanley/C.Kmake or equivalent make and as per direction of engineer-in-charge.
25	Supply of Stanley Ratcheting Screwdriver Setof equivalent make and as per direction of engineer-in-charge.
26	Supply of 2mm to 20mm Rivet gun of Yato make or equivalent make and as per direction of engineer-in-charge.
27	Supply of 12 inch Vice of bosch, stanley, taparia or makhita makeand as per direction of engineer-in-charge.
28	Supply of Tapping set of bosch, stanley, taparia or makhita makeand as per direction of engineer-in-charge.
29	Supply of all sizes Safety glasses of bosch, stanley, taparia or makhita make or equivalent make and as per direction of engineer-in-charge.
30	Supply of all sizes Workshop gloves of bosch, stanley, taparia or makhita make or equivalent make and as per direction of engineer-in-charge.
31	Supply of all sizes Workshop apron of bosch, stanley, taparia or makhita make or equivalent make and as per direction of engineer-in-charge.
32	Supply of0.5mm to 18mm Table drill of bosch, stanley, taparia or makhita make or equivalent make and as per direction of engineer-in-charge.
33	Supply of4 Inch to 10 Inch Angle grinder and all the attachments ofBosch,STANLEY,Black & Decker,Dewalt make or equivalent make and as per direction of engineer-in-charge.
34	Supply of650w, blade all size Jigsaw and its Bladesof reputed make and as per direction of engineer-in-charge.
35	Supply of4-8in, blade all size Circular saw and its blades ofBosch,Makita,Black & Decker,Dewalt ofmake and as per direction of engineer-in-charge.
36	Supply of14-18in, bits all size set, Drill and drill bits-Bosch,Black & Decker,Dewalt ofmake and as per direction of engineer-in-charge.
37	Supply of1350W11500RPM Makita wood Trimmer of reputed make and as per direction of engineer-in-charge.
38	Supply of12000rpm Finishing Sander of Makita make or equivalent make and as per direction of engineer-in-charge.
39	Supply of12000rpm Electric buffer of Dewalt make or equivalent make and as per direction of engineer-in-charge.
40	Supply of4-8in disc Bosh Metal Cutter of reputed make and as per direction of engineer-in-charge.
41	Supply ofPhase: 3 Phase Working Voltage: 415, Mig welding ofHOBART, MILLERMATIC , LINCOLN ofmake and as per direction of engineer-in-charge.
42	Supply of350A Arc welding ofHOBART, MILLERMATIC, LINCOLN,make and as per direction of engineer-in-charge.
43	Supply of12-16inch Metal grinding wheel station - 3M, STANLEY, BOSCH, TAPARIA make and as per direction of engineer-in-charge.
44	Supply of4-8 Inch Wood grinding machine of Bosch or equivalent make and as per direction of engineer-in-charge.
45	Supply and installation ofco2laserengraving& cutting machine with glass laser tube of size 4ftx3ft with laser power 80w/100w/130w , laser source - sealed glass Co2 laster tuber, Travelling speed- 600mm/s, Reposition accuracy 0.02mm, Minimum letter size- 1.0mm (english font), X Y Movement system- belt transmission, Z-Axis Movement- Automatic Upto 180 mm (optional), Power Adjustment- 1 to 100%, Driving system- Stepper Motor/servo motor, Operating system- Win 7/8/10, 32/64 bit, Computer interface- Udisk, USB, Ethernet, Supported Format- PLT, DXF, BMP, JPG, AI, DWG, BMP, GIF, HPGL, Compatible Software- CorelDRAW, AUTOCAD, Photoshop, Tajima, Working Voltage- Single Phase 220-230V/50Hz-60Hz, Operating Environment- 45ºC, Humidity 5%-80%, Memory Buffer- 128MB, Fume Extraction System- External exhaust system with minimum flow rate 1200m3/h(CFM 706 ft3/h). connection output 4"Diameter, Overall Dimension(L x W x H)- 1450 x 1780 x 1070mm, Weight- 332 kg, Power Consumption- 2kw all completeor as per the direction ofengineer in charge
46	Supply and installation of 3axis CNC engraving and Router machine with stepper motor of outer dimensions 2150 x 3300 x 1700, Working area (X, Y, Z) 1300 x 2500 x 200mm, Spindle 6KW Air Cooled, Spindled Speed- 18000RPM, Distance Between Bed & Gantry- 200mm, Maximum Travelling Speed- 18mtr/min, Cutting Tool Diameter- 03 to 16mm, Repeated Location- 0.025 mm, Operating System- DSP-Hand Held Controller, Driving System- Stepper Motor, Power Supply- AC 420V/3PH, Weight (approx.)- 970 kg. including rotary and dust wiser or all other accessories required to set up the machineall complete or as per the direction of engineer in charge
47	Supply ofAll size kit Nails 20 types of reputed make and as per direction of engineer-in-charge
48	Supply ofAll size kit Screws 20 types of reputed make and as per direction of engineer-in-charge
49	Supply ofAll size kit nut and bolts 20 types of reputed make and as per direction of engineer-in-charge
50	Supply ofAll size kit rivet 10 types of reputed make and as per direction of engineer-in-charge
51	Supply ofAll size kit washers 20 types of reputed make and as per direction of engineer-in-charge
52	Supply of6-8 Inch Glue sticks of reputed make and as per direction of engineer-in-charge
53	Supply ofBasic and advance Electronic DIY Kit of reputed make and as per direction of engineer-in-charge
54	Supply ofBasic and advance Mechanical DIY Kit of reputed make and as per direction of engineer-in-charge
55	Supply ofBasic and advance Mechatronic DIY Kit of reputed make and as per direction of engineer-in-charge
56	Supply ofBasic and advance Drones DIY Kit of reputed make and as per direction of engineer-in-charge
57	Supply ofBasic and advance Robotics DIY Kit of reputed make and as per direction of engineer-in-charge
58	Supply ofBasic and advance STEAM DIY Kit of reputed make and as per direction of engineer-in-charge
59	Supply of3D printer as per the following specifications:-model- ender-6, 250x250x400mm. Molding tech-FDM, nozzle number-1, slice thickness-0.1mm-0.4mm, nozzle diameter-standard- 0.4mm, precision- ±0.1mm , filament- 1.75 PLA filament , file format- STL/OBJ/ AMF, working mode- storage card offline, slice software creality slicer / cura / repetier - host / simplify 3Dwith total power 350 W , operating system - windows XP/7/8/10 MAC / linuxall complete or as per the direction of engineer in charge
60	Supply of3D Printer as per the follwing specifications:- Exposure screen: 13.6" monochrome ? Printing accuracy: 6,480 x 3,600 px (7K) ? Contrast ratio: 450:1 ? Light source: Parallel matrix (LED lights x 84) ? Build plate: Laser engraved platform ? Printing speed: = 60 mm/hr ? Control panel: 4.3" resistive touch-control ? Data input: USB-A 2.0 ? Rated power: 120W ? Print size: 300 x 298 x 164 mm / 11.8 x 11.7 x 6.46 in. (HWD) ? Printing volume: 14.7 L / 498.5 oz ? Machine size: 596 x 400 x 408 mm / 23.5 x 15.7 x 16 in. (HWD) ? Machine weight: 21 kg / 46.3 lb
61	Supply of3d printer of Extruder Type-IDEX (Independent dual extruders) with Printing Precision- ±0.2mm, Build Volume-300x250x200mm, Nozzle Diameter-0.4mm(0.6/0.8mm), Print Speed-10-150mm/s, Maximum Extruder Temperature-320?, Platform Heating Temperature- 120?, Filament-PLA / ABS / PA / PC / PVA / HIPS / PETG / Wood / ASA / PACF all completeor as per direction of engineer-in-charge.