Public Administrative Department Government Departments Closing in 0 days TDR #36424611

Tender For Construction Of New Toilet At Govt, Boys Hr Sec,School In Pallapatti Municipality.

Issued by Government Departments · pallapatti, Tamil Nadu
Tender Value
6.50 Lakhs
Estimated cost
Bid Submission
09 Mar 2023
0 days left
EMD
6500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
pallapatti → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of New Toilet At Govt, Boys Hr Sec,School In Pallapatti Municipality.

BOQ

Name of Work: Construction of New Toilet at Govt, Boys Hr Sec,School inPallapatti Municipality.Estimate Amount:6.50Lakhs
Sl. No. Item Description
1Earth work excavation for foundation in all types of soils and sub soils with an initial lead of 10m and lift of 2m includingall labour charges for excavation in loose soil and hard stiff clay mixed with boulders and reflling the sides of foundation etc, complete
2Supply and filling of river sand from the approved quality quarry including filling charges etc., complete
3Plain Cement concrete 1 : 4 : 8 (one cement, four sand and eight aggregates) using hard broken granite stone jelly of 40mm gaugefor foundation leveling course including shuttering dewatering wherever necessary and laid in layers of not more than15cm thick complete complying with standard specification
4Supplying and Erecting Steel Centering for sides and soffits including supports and strutting upto 3.29m height for plane surfaces such as RCC Slabs, Rectangular Beams, TEE or ELL Beams, Lintels, Bed blocks, Staircase waist and Landing slabs, Landing Beams, canopy etc., with all cross brasings using mild steel sheets of size 90cmx60cm and 10gauge stiffened with welded MS angles of size 25mmx25mmx3mm for boarding laid over silver oak (CW) joists of size 10cmx6.5cm spaced at about 90cm c/c and supported by causrina props of 10cm to13cm dia spaced at 75cm c/c etc, complete complying with std specification
5Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC worksas per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS.
6Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -
7Brick work in cement mortar 1:5 (one cement & five sand ) using country bricks of size8 3/4\"x4 1/4\"x2 3/4\" inculding all cost and conveyanceof all materials to the site and all labour charges etc .,complete - 10m3
8Plastering with cement mortar 1:5 mix 12mm thick inculding all cost and conveyance of all labour and material charges etc .,complete
9Supplying and fixing in positon of R.C.C. jally of 5 cm thick in CC1:2:4 using 20 mm machine crushed jelly including moulding, finishing, curing and fixing in posiion etc.,
10Supply and fixing in position of white glazed of 20” size Indiantype water closet with ‘p’ or ‘S’ trap and a pair porcelain foot rest toslaps set in bricks jelly cc 1:4:8100mm thick using 20mm thick jelly and finishing to sludge out any leakage and defaultincludingcost and conveyance of all materials labour charges for fixing inposition and other incidental charges etc., complete as directed by dept. officers.
11Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
12Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
13Floor finishing with colour ceramic tiles of size 305mmx305mmx6mm of approved quality & Colour laid in cement mortar 1:3mix 20mm thick and pointing with white cement using 0.40 kg/m2including cost and conveyance of all labour and materials charges etc., complete
14Dadooing the sides of walls for 1.50m height from the flooring with glazed square tiles 15cm x 15cm x 6mmof best quality and colour and set in cement mortar 1:2mix and pointing with white cement nearly as directed over the plastered surface of 3m between finished surface of dadooing and the plastered surfaceof walls-10m2
15Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification.
16Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.
17Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains.(SD - 67)
18Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable Colourfor open PVC light point / fan point (For electronic regulator) (6points per coil) (SD 20))
19Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K-Lite) suitable for 11W CFL lamp with CFL
20Supply the following pipe materials with spericals etc.,complete
2132mmUPVCPipe
2232mm UPVC Elbow
2332mm UPVC TEE
2432mm x 25mm UPVCReducer
2525mm x20mm UPVCReducer
2620mm UPVC Pipe
2720mm Elbow
2820mm x15mm UPVCReducer
2915mm PVC Tap

AI Tender Summary

OUR REF NO 36424611
AUTHORITY Government Departments
TENDER VALUE 6.50 Lakhs
LAST DATE 09-03-2023
Authority
Authority Name municipality
Work Description Construction Of New Toilet At Govt, Boys Hr Sec,School In Pallapatti Municipality.
Basic Detail
Tender No 878/2022/E1
Bidding Type Tender
Location
City pallapatti
State Tamil Nadu
Key Dates
Publish Date 23 Feb 2023
Submission Date 09 Mar 2023
Open Date 09 Mar 2023
Finance
Tender Value 6.50 Lakhs
Tender Fee Ref. Documents
EMD 6500
Exemption Not Available
Document List
acda6537-334c-4055-82c4-829dae876ae7.html
BOQ_345052.xls
tender.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 23, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 09, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 09, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

acda6537-334c-4055-82c4-829dae876ae7.html

xls

BOQ_345052.xls

pdf

tender.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders