Tender For Annual Repair And Maintenance Of Residential Building Under Sd-I Of Cd-I Apwd Rangat During 2022-23. Sw - Providing Of View Cutter In Assistant Commissiner Residence I.C Painting Work, Cover Slab Over Road Side Drain Etc Under Sd-I, Cd-I, Ran
Tender Value
8.02 Lakhs
Estimated cost
Bid Submission
27 Feb 2023
0 days left
EMD
16052
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rangat → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Annual Repair And Maintenance Of Residential Building Under Sd-I Of Cd-I Apwd Rangat During 2022-23. Sw - Providing Of View Cutter In Assistant Commissiner Residence I.C Painting Work, Cover Slab Over Road Side Drain Etc Under Sd-I, Cd-I, Rangat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 7 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 8 | One coat |
| 9 | Distempering with 1st quality acrylicdistemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer\"s specification. |
| 10 | One or more coats on old work |
| 11 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : |
| 12 | Two or more coats on new work |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 14 | One or more coats on old work |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 16 | Foundations, footings, bases of columns, etc. for mass concrete |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 18 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 19 | 12 mm cement plaster of mix : |
| 20 | 1:4 (1 cement: 4 fine sand) |
| 21 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required : |
| 22 | W.C. pan with ISI marked white solid plastic seat and lid |
| 23 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. |
| 24 | Flexible pipe32 mm dia |
| 25 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 26 | 45 cm length15 mm nominal bore |
| 27 | Providing and fixing white vitreous china wash basin including makingall connections but excluding the cost of fittings : |
| 28 | Flat back wash basin of size 450x300 mm |
| 29 | Flat back wash basin of size 550x400 mm |
| 30 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 31 | Medium shade pigment using 50% white cement 50% Grey cement |
| 32 | Providing and laying matt finished vitrified tile of size 300x300x9.8mmhaving with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoorfloors such as footpath, court yard, multi modals location etc., laidon 20mm thick base of cement mortar 1:4 (1 cement : 4 coarsesand) in all shapes & patterns including grouting the joints with whitecement mixed with matching pigments etc. complete as per directionof Engineer-in-Charge. |
| 33 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position including welding and bolted with special shaped washers etc. complete. |
| 34 | GI pipe |
| 35 | Providing, hoisting and fixing upto plinth level precast reinforced cement concrete in cover slab, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 36 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 37 | W.C. pan with ISI marked white solid plastic seat and lid (make- Hindware or its equivalent) |
| 38 | Providing and fixing CP brass Health faucet (ABS) with rubbit cleaning system, 125cm long CP flexible tube and ABS wall hook of make - Hindware/Jaquar or its equivalent with fittings complete as per the direction of Engineer-in-charge. |
| 39 | 15mm nominal bore |
| 40 | Providing and fixing CP brass bib cock with wall flange of make - Hindware or its equivalent with fittings complete as per the direction of Engineer-in-charge. |
| 41 | 15mm nominal bore |
| 42 | Providing and fixing CP brass angular stop cock with wall flange of make - Hindware or its equivalent including all fittings complete as per the direction of Engineer-in-charge. |
| 43 | 15mm nominal bore |
| 44 | Providing and fixing CP brass towel ring circular shape of Hindware make - Othello model or its equivalent with concealed fittings arrangements complete as per the direction of Engineer-in-charge. |
| 45 | Providing and fixing CP brass single flow overhead shower with arm (rubbit cleaning system) of Hindware or its equivalent with all fittings complete as per the direction of Engineer-in-charge. |
| 46 | Providing and fixing CP brass 2 way bib cock with wall flange of approved quality and colour of make Jaguar /Hindware or its equivalent with all fittings complete as per the direction of Engineer-in-charge. |
| 47 | 15mm nominal bore |
| 48 | Providing and fixing CP brass pillar cock lever type of make - Hindware or its equivalent or as per the direction of Engineer-in-charge. |
| 49 | 15mm nominal bore |
| 50 | Painting with acrylic emulsion floor paint having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. |
| 51 | Two or more coats on new work |
AI Tender Summary
Tender Timeline
Feb 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender