Fabrication, Erection And Partial Replacement Of Pipelines/Structural Jobs Including Painting At Cpcl-Cbr-Nagapattinam. , Engaging Contract For Fabrication & Erec , The Job Includes Transporation Of All Free Issue Materials From Owners Storage Point To Work Site, Handling At Site, Cutting, Bevelling, Fabrication, Laying, Welding & Erection Of Carbon Steel Piping Including Sleeve Pipes Below Ground Level, Trenchs At All Depths, Stand Posts, Anchoring Of All Underground Pipelines For Connection With Equipments & Nozzles / At All Locations Including Offsite, Above Ground Level, Overhead, Over Sleepers, Piperacks, Crossovers, Pipe Sleeves, Trenches, Stand Posts, Connecting With Equipments & Nozzles, Providing Tappings From The Existing Pipelines At All Grades & Elevations Including Under Road Culverts. The Piping Job Includes All Modification And Replacement Jobs Involving Pipes & All Types Of Fittings Like Elbows / Tees / Reducers / Half Coupling / Full Coupling, Etc.,All Types Of Flanges Like Slip On / Raised Face, Etc., All Types Of Inline Instruments Like Rotameter / Pressure Gauges / Thermowells, Etc., Valves, Expansion Joints, Steam Traps, Orifice Assemblies, Strainers, Vents, Drains, Funnels, Etc., Of Different Schedules, Pressure Ratings And For Various Temperature Applications. The Piping Job Includes Providing Shoe Supports, Pads At Support Locations, Reinforcement Pads, Etc., Wherever Required. The Job Includes Flushing, Preparing Work Area For Executing Hot Work, Bending To Suit The Contours Wherever Required, Socket, Fillet, Butt Welding Using E 6010 / E 6013 / E 7018 Electrodes As Required, Dpt Wherever Required, Hydraulic / Pneumatic Test Twice For U/G Works(On Completion Of Fabrication & On Completion Of Laying At Site) As Per Codes, Specification, Drawings And Draining Of Water & Drying With Compressor Air After Hydrotest. The Job Also Includes Supplying Of All Types Of Tools & Tackles,Lifting Arrangements Like Chain Pulley Blocks, Machineries, All Consumables And Labour To Complete The Job In All Respects, Returning Back The Unused Materials To Owners Storage Point And Dumping The Generated Scrap Material To Scrap Yard As Per Eic Instructions. The Rates For The Following Items Shall Be Exclusive Of Blinding & Deblinding, Reinforcement Pad Welding, Radiography, Removal Of Old Piping For Replacement And Erection & Removal Of Scaffolding, Concrete / Pcc Breaking, Earth Excavation & Re-Filling, Wrap & Coating. The Rates For The Following Items Shall Be Inclusive Of Cutting, Fabrication, Laying, Erection, Welding, Providing Shoe Supports, Pads At Support Locations, Flushing Of The Piping System, Offering Stagewise Inspection, Hydrotesting And Draining / Drying Of The Piping System. , Socket Weld Joint - Carbon Steel - At All Elevation With Hydrotest , Butt Weld - Carbon Steel - Up To 8.8Mm Thk Up To 5Mtrs From Ground Level With Hydrotest , Butt Weld - Carbon Steel - Underground Piping - Butt Welding Joint - Upto 8.8 Mm Piping Thickness -With One Hydro / Pneumatic Testing , Sorf Welding Joint - Carbon Steel - At All Elevation With Hydrotest , The Job Involves Removal Of Existing Above Ground, Under Ground, Overhead Insulated Or Uninsulated Or Steam Traced Piping Including All Types Of Fittings Like Elbows / Tees / Reducers, Etc., Flanges, Valves, All Types Of Instruments, Supports By Coldcutting / Gas Cutting / Grinding, Etc., At All Locations At All Grades & Elevations Without Damaging Any Other Portion Of The Existing Unit, Lowering Down The Same To Ground Level, Transportation Of The Same To The Designated Area As Per The Instructions Of Engineer-In-Charge. The Insulation Materials To Be Removed From The Pipesand Transported To Their Respective Designated Locations As Per Eic The Job Also Includes Supplying Of All Types Of Tools & Tackles,Lifting Arrangements Like Chain Pulley Blocks, Machineries, All Consumables And Labour To Complete The Job In All Respects. , Dismantling Of Cs Piping , All Painting Shall Be Carried Out As Per Cpcl Painting System, Paint Shall Be Done By Brush / Airless Spray As Recommended By Cpcl Painting System / Inspection, Primer, Intermittent And Finish Painting System To Be Followed After Surface Preparation As Per Details Given In The Cpcl Painting Specification. , Painting System-X , The Job Includes Collection & Transportation Of Required Materials From Owners Storage Point, Marking To The Required Size, Cutting, Bending To The Desired Curvature Wherever Required, Edge Preparation, Fit Up & Fillet Welding On All Four Sides Using E 6013Electrodes, Flushing The Finished Weld Surface By Grinding And Offering Dpt At All Grades & Elevations. The Job Also Includes Supplying Of All Types Of Tools & Tackles, Lifting Arrangements Like Chain Pulley Blocks, Machineries, All Consumables And Labour To Complete The Job In All Respects, Transportati On Of Unused Materials To Owners Storage Point And Dumping The Generated Scrap Material To Designated Area As Per Eic Instructions. , Patch Plate Welding - Carbon Steel - Upto 6 Mm Thickness Using E 6013 Electrodes , The Job Includes Bending Of Pipes In The Required Curvature Inlcuding Tools, Tackles, Lobour, And The Supervision To Complete The Job As Per The Instruction Of Enginer In Charge , Bending Of Pipes4 To Suit The Existing Contoor Of Pipeline , Bending Of Pipes6 To Suit The Existing Contoor Of Pipeline
