Tender For Various Development Work In Narhar Dargah Jhunjhunu, jhunjhunu-Rajasthan

Tender For Various Development Work In Narhar Dargah Jhunjhunu - Demolishing Brick Work Manually / By Mechanical Meansincluding Stacking Of Serviceable Material And Disposal Ofunserviceable Material Within 50 Metres Lead As Per Directionof Engineer-In-Charge. 3 Demolishing Stone Rubble Masonry Manually / By Mechanicalmeans Including Stacking Of Serviceable Material And Disposalof Unserviceable Material Within 50 Metres Lead As Perdirection Of Engineer-In-Charge: 4 Dismantling Precast Concrete Or Stone Slabs In Wallpartitions Etc. Including Stacking Within 50 Meter Lead: 5 Earth Work In Surface Excavation Not Exceeding 30Cm. Indepth But Exceeding 1.5 Meter In Width As Well As10 Sqm Onplan Including Disposal Of Excavated Earth Up To 50 Mtr. Andlift Up To 1.5 Mtr. Disposed Soil To Be Levelled And Neatlydressed : All Kinds Of Soil 6 Earth Work In Excavation By Mechanical Means ( Hydraulicexcavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Includingdressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing Andrefilling Of Jhiri With Watering & Ramming And Disposal Ofsurplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 7 Excavation Work By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains Not Exceeding1.5 M In Width Or 10 Sqm On Plan Including Dressing Of Sidesand Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Outthe Excavated Soil And Disposal Of Surplus Excavated Soil Asdirected With A Lead In A 50 Meter Including Stacking Of Usefulmaterial If Available : 8 Diluting And Injection Chloropyrifos Emulsifiable Concentrate 20% With 1% Concentration For Pre-Constructional Anti Termite Treatment As Per Is 6313 Part Iii As Amended From Time To Time And Creating A Continuous Chemical Barrier Under And Around The Column Pits, Wall Trenches, Basement Excavation, Top Surface Of Plinth Filling, Junction Of Wall And Floor Along The External Perimeter Of Building Expansion Joints, Over The Top Surface Of Consolidated Earth Of Which Aproch Is To Be Laid Surrounding Of Pipes And Conduits Etc. Complete As Per Specification ( Plinth Floor Area Only Shall Be Measured For Payment And Excluding The Cost Of Chemical Emulsion ) 9 Providing And Laying In Position Cement Concrete Includingcuring, Compaction Etc. Complete In Specified Grade Excludingthe Cost Of Centering And Shuttering - All Work Up To Plinthlevel. 1:4:8 ( 1Cement :4 Course Sand :8 Graded Stone Aggregate 40 Mm Nominal Size= 10 Centering And Shuttering With Plywood Or Steel Sheetsincluding Strutting, Propping Bracing Both Ways And Removalof Formwork For Foundation , Footings, Strap Beam, Raft , Basesof Columns Etc. 11 Providing And Laying In Position Specified Grade Of Cementconcrete For All Rcc Structural Elements Upto Plinth Levelincluding Curing, Compaction, Finishing With Rendering Incement Sand Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Makinggood The Joints And Cost Of Plastizers ( If Required ) Excludingthe Cost Of Centering, Shuttering And Reinforcement. 12 Excavating Holes Upto 0.5 Cum Including Getting Out Theexcavated Soil, Then Returning The Soil As Required In Layers Notexceeding 20 Cm In Depth, Including Consolidating Eachdeposited Layer By Ramming, Watering Etc, Disposing Of Surplusexcavted Soil; As Directed Within A Lead Of 50 M And Lift To 1.5 M 13 Random Rubble Stone Masonry For With Hard Stone Infoundation And Plinth In Cement Sand Mortar Above 30 Cmthick Wall In: Cement Mortar 1:6 ( 1-Cement:6-Sand ) . 14 Random Rubble Dry Stone Kharanja Under Floor. 15 Centering & Shuttering With Plywood Or Steel Sheets Includingstrutting, Propping Bracing Both Ways With Steel Props Andremoval Of Formwork For Upto Floor Five Level For : Columns, Pillars, Posts And Struts Etc. 16 Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping, Bracing Both Ways With Wooden Members Andremoval Of Formwork For Superstructure Up To 4.5 Mtr Aboveplinth, For:Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands , Coping, Bed Plates, Anchor Blocks, Sills, Chhajjas Lintel, Beam Etc. 17 Providing And Laying In Position Specified Grade Of Cementconcrete For Rcc Structural Elements Upto Floor Five Levelincluding Curing, Compaction, Finishing With Rendering Incement Sand Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Makinggood The Joints And Cost Of Plastizers ( If Required ) Excludingthe Cost Of Centering, Shuttering And Reinforcement For Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinthand String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc.M20 Grade Nominal Mix / Design Mix 18 Providing And Laying In Position Specified Grade Of Cementconcrete For Rcc Structural Elements Upto Floor Five Levelincluding Curing, Compaction, Finishing With Rendering Incement Sand Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Makinggood The Joints And Cost Of Plastizers ( If Required ) Excludingthe Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plainwindows Sills, Staircases And Spiral Staircases Etc.M20 Grade Nominal Mix / Design Mix 19 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding ( Including Cost Of Binding Wire ) All Complete Up To Floor Three Level.Tremo Mechanically Treated Bars 20 Brick Work With F.P.S. Bricks Of Class Designation 75 Insuperstructure Above Plinth Level Upto Floor V Level In Allshapes And Sizes In :.Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) 21 Half Brick Masonry In Superstructure , Above Plinth Level Uptofloor V Level Using Bricks Of Designation 75Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) 22 Providing And Fixing Marble Stone Flooring Table Rubbed, 15-18 Mm Thick Over 20Mm ( Av. ) Thick Base Of Cm 1:4 ( 1 Cement: 4 Coarse Sand ) Jointing With White Cement Mortar 1:2 ( 1 Whitecement : 2 Marble Dust ) With Pigment To Match The Shade Of Themarble Slab Including Grinding, Rubbing And Polishingcomplete..Upto To 1500 Cm2 Tiles 23 Providing And Fixing Marble Stone Flooring Table Rubbed, 15-18 Mm Thick Over 20Mm ( Av. ) Thick Base Of Cm 1:4 ( 1 Cement: 4 Coarse Sand ) Jointing With White Cement Mortar 1:2 ( 1 Whitecement : 2 Marble Dust ) With Pigment To Match The Shade Of Themarble Slab Including Grinding, Rubbing And Polishingcomplete. Size Upto 1500 Cm2 ) 24 Providing And Fixing 1St Quality Standard White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shadesglazed Tiles Confirming To Is : 13753 & Is :15622 Of Size200mm X 300Mm In Walls, Floors, Steps, Pillars Etc. Laid On Abed Of Neat Cement Slurry Finished With Flush Pointing In Thewhite Cement Mixed With Pigment To Match The Shade Of Thetile Complete ( Excluding The Cost Of Cement Plaster On Wallsand Pillar ) .Somani Make Etc. 25 Providing And Fixing Granite Stone Slab Mirror Polished Andmachine Edge Cut In Walls, Pillars, Steps, Shelves, Sillscounters, Floors Etc. Laid On 12Mm ( Av. ) Thick Base Of Cementmortar 1:3 ( 1 Cement : 3 Coarse Sand ) Jointing With Whitecement Mortar 1:2 ( 1White Cement : 2 Marble Dust ) Withpigment To Match The Shade Of The Marble Slab Includinggrinding, Rubbing And Polishing Complete 26 Jhunjhunu / Jalore ( Red / Choclate / Black / Pink Colour ) 27 Size Above 3600 Cm2 28 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurrymixed With Pigment To Match The Shade Of The Slab Includingrubbing And Polishing Complete With Base Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) 29 For Area Of Each Slab From 901 To 2000 Sq.Cm : 30 ( A ) 25 Mm Thick Slab. 31 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurrymixed With Pigment To Match The Shade Of The Slab Includingrubbing And Polishing Complete With Base Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) 32 For Area Of Each Slab From 2001 To 5000 Sq.Cm 33 ( A ) 25 Mm Thick Slab. 34 Kota Stone Slabs 25 Mm Thick In Risers Of Steps, Skirting, Dadoand Pillars Laid On 12 Mm ( Average ) Thick Cement Mortar 1:3 ( 1Cement 3 Coarse Sand ) And Jointed With Grey Cement Slurrymixed With Pigment To Match The Shade Of The Slabs, Includingrubbing And Polishing Complete 35 For Area Of Each Slab From 2001 To 5000 Sqcm 36 Providing And Fixing 1St Quality Mat Finished Ceremic Tilesize 300X300mm Confirming To Is : 13755 And Is : 15622Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc.Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointingin The White Cement Mixed With Pigment To Match The Shade Ofthe Tile Complete ( Including The Cost Of Cement Mortar Bed 37 Providing And Fixing 1St Quality Mat Finished Ceremic Tilesize 300X300mm Confirming To Is : 13755 And Is : 15622Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc.Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointingin The White Cement Mixed With Pigment To Match The Shade Ofthe Tile Complete ( Including The Cost Of Cement Mortar Bed 38 Providing And Fixing Pressed Steel Door Frames Confirming Tois 4351 Manufactured From Commercial Mild Steel Sheet Of1.25 Mm Thickness Including Hinges Jamb, Lock Jamb, Bead Andif Required Angle Threshold Of Mild Steel Angle Of Section50x25mm, Or Base Ties Of 1.25Mm Pressed Mild Steel Weldedor Rigidly Fixed Together By Mechanical Means, Adjustable Lugswith Split End Tail To Each Jamb Including Steel Butt Hinges2.5Mm Thick With Mortar Guards, Lock Strike-Plate And Shockabsorbers As Specified And Applying A Coat Of Approved Steelprimer After Pre-Treatment Of The Surface Including Filling Withcc 1:2:4 ( M15 Grade ) Complete As Directed By Engineer-Incharge 39 Profile B 40 Providing And Fixing In Position Collapsible Steel Shutters Withvertical M.S. Channels 20 X 10 X 2Mm And Bracket With Flatiron Diagonals 20 X 5Mm. Size With Top And Bottom Rail Of Tiron40 X 40 X 6Mm. With 40Mm Dia Steel Pulleys / Ball Bearingcomplete With Bolts, Nuts Locking Arrangements Inside Andoutside Stoppers, Handles Etc. As Per Specification Includingapplying A Priming Coat Of Approved Steel Primer. ( To Bemeasured And Paid As Per Outer Dimension ) 41 Providing And Fixing M.S. Sheet 1Mm Thick Single Leaf Doorshutter In Angle Iron Frame 35X35x5mm Suitabilly Diagonallybraced With 25X3mm Flat Iron Above And Below Lock Rail Ofsize 50X5mm Beading Extra Including All Fittings, As Perdirection Of Engg. Incharge But Excluding Cost Of Chowkhats:Including Two Coats Of Anit-Corrosive Red Oxide Primer Paint 42 Providing And Fixing Steel Glazed Doors Windows Andventilator Shutters Of Standard Rolled Steel Section ( Is 1038-1983 ) Joints Mitred And Welded With Steel Lugs 13X3mm, 10Cm.Long Embedded In Cement Concrete Block 15X10x10cm. Of1:3:6 ( 1Cement : 3 Coarse Sand : 6 Graded Stone Aggregate20mm Nominal Size ) Or With Wooden Plugs And Screws Or Rawlplugs And Screws With Fixing Clips Or With Bolts And Nuts Asrequired Including Providing And Fixing Of Plain Glass Panes4mm Thick With Cooper Glazing Clips And Special Metal Sashputty Of Approved Make Or Metal Beading With Screwscomplete Including Priming Coat Of Approval Steel Primer, Excluding The Cost Of Metal Beading And Other Fitting Exceptnecessary Hinges Of Pivots Steel Handles Peg Stay Etc. Asrequired : 43 Supplying And Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gaugeto The Metal Frame Of Rolled Section By Metal Beading 20X3mmwith Suitable Screw At Not Exceeding 150Mm Distance. 44 Providing And Fixing External Grade Board Solid Core Singleleaf Flush Door Shutters Isi 2202-67 Marked Using Phenolformal Dehyderesin In Glue Both Sides With Approved Steelfittings Complete As Per Annexure A : 45 Decorative Teak Veener Both Side 46 30 Mm Thick Shutter 47 Add Extra For Flush Doors 48 Extra For Cutting Rebate In Flush Door Shutters For Makingdouble Leaf Shutter ( Total Area Of The Shutter To Be Measured ) . 49 P & F Bevelled Edge Mirror / Mirror With Teak Wood Lippingaround Of Special Glass Of Approved Make As Per Direction Ofengineer-In-Charge Complete With 6Mm Thick Commercial Plybase Fixed To Wooden Screws & Washers.Size 600 X 450Mm X 4 Mm Thick 50 Providing And Fixing 18 Mm Thick, 150 Mm Wide Pelmet Of Flatpressed 3 Layer Or Graded Wood Particle Board Medium Densitygrade I, Is : 3087 Marked Including Top Cover Of 6 Mmcommercial Ply Wood Conforming To Is: 303 Bwr Grade, Nickel Plate Ms 20 Mm Dia Curtain Rod With Nickel Platedbracket Including Fixing With 25X3 Mm Ms Flat 10 Cm Long Allcomplete 51 Providing And Fixing Curtain Rods Of 1.25 Mm Thick Chromiumplated Brass Plate, With Two Chromium Plated Brass Bracketsfixed With C.P. Brass Screws And Wooden Plugs, Etc., Wherevernecessary Complete: 52 20 Mm Dia. 53 Plaster On New Surface On Walls In Cement Sand Mortar 1:6Including Racking Of Joint Etc. Complete Fine Finish : 54 20 Mm Thick. 55 Grading Roof For Water Proofing Treatment With Waterproffing Compound Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Gradedstone Aggregate 20 Mm Nominal Size ) 56 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 ( 1 Cement: 2 Coarse Sand : 4 Stone Aggregate 10Mm And Down Gauge ) Including Finishing With Cement Mortar 1:3 ( 1 Cement : 3 Finesand ) As Per Standard Design : 57 Providing And Applying Plaster Of Paris Putty Of 2 Mmthickness Over Plastered Surface To Prepare The Surface Evenand Smooth Complete 58 Painting With Oil Type Wood Preservative Of Approved Brandand Manufacture : New Work ( Two Or More Coats ) . 59 Distempering With Oil Bound Washable Distemper Of Approvedbrand And Manufacture To Give An Even Shade Including Allscaffolding: New Work ( Two Or More Coats ) Over And Includingscrapping And Priming Coat With Cement Primer. 60 Applying Priming Coat With Ready Mix Pink Or Gray Primer Of Approved Brand Andmanufacture On Wood Work Hard And Soft Wood. 61 Finishing Wall With Water Proofing Cement Paint Of Approvedbrand And Manufacture And Or Required Shade To Give An Evenshade Including All Scaffolding: New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) . 62 Providing & Fixing Precast Cement Concrete Coping 1 : 2: 4 Mix 50Mm Thick Complete As Per Specification : 63 Extra For Providing Edge Moulding To 15-18Mm Thick Marble / Granite / Kota Stone Counters, Vanities Etc. Including Machinepolishing To Edge To Give High Gloss Finish Etc. Complete As Perdesign Approved By Engineer-In-Charge.Marble Work ( I ) Full Edge Moulding 64 Marble Work 65 Providing And Fixing Aluminum Work For Doors , Windows, Ventilators And Partition With Extruded Built Up Standardtubular / Appropriate Z Sections And Other Sections Of Approvedmake Conforming To Is :733 And Is :1285, Fixed With Rawlplugs And Screws Or With Fixing Clips , Or With Expansion Holdfasteners Including Necessary Filling Up Of Gap. At Junctions , Attop , Bottom And Sides With Required Pvc / Neoprene Felt Etc.Aluminium Section Shall Be Smooth , Rust Free, Straight , Miteredand Jointed Mechanically Wherever Required Including Cleatangle Aluminium Snap Beading For Glazing / Paneling , C.P.Brass / Stainless Steel Screws Al. Tower Bolt & Al. Handle & Al.Aldrop Etc., All Complete As Per Architectural Drawings And Thedirections Of Engineer- In – Charge . ( Glazing And Paneling Tobe Paid For Separately ) . For Fixed Portion Anodised Aluminum ( Anodised Transparent 81 Dyed To Requiredshade According To Is : 1868. ( Minimum Anodic Coating Ofgrade Ac 15, Anodizing To Be Got Done From Approvedanodizer ) 66 For Fixed Portion 67 Providing & Fixing Anodizing Alumium Work ( Anodizing To Be Got Done From Approved Anodizer ) For Doors, Windows, Ventilators And Partition With Extruded Built Up Standard Tubular And Other Sections Of Approved Make Confirming To Is : 733 And Is : 1285 Anodised Transparent 81 Dyed To Required Shade According To Is : 1868 ( Minimum Anodic Coating Of Grade Ac 15 ) , Fixed With Rawl Plugs And Screws Or With Fixing Clips Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gas At Junctions, At Top, Bottom And Sides With Required Pvc / Neoprene Felt Etc. Aluminium Section Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Inlcuding Cleat Angle Aluminum Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, Al. Tower Bolt & Al. Handle & Al. Aldrop Etc. All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing And Peneling To Be Paid For Separately ) . 68 Anodised Aluminum ( Anodised Transparent 81 Dyed To Requiredshade According To Is : 1868. ( Minimum Anodic Coating Ofgrade Ac 15, Anodizing To Be Got Done From Approvedanodizer ) . 69 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Pvs / Neoprenegasket Etc. Complete As Per The Architectural Drawings And Thedirections Of Engineer-In-Charge. ( Cost Of Aluminium Snapbeading Shall Be Paid In Basic Item. ) With Float Glass Panes Of 5.0 Mm Thickness ( Weight Not Lessthan 13.50 Kg / Sqm ) 2835 70 Providing And Fixing Glazing In Aluminium Door, Window, Vintilator Shutters And Partitions Etc. With Pvs / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge ( Cost. Of Aluminium Snap Beading Shall Be Paid In Basic Item. ) With With Float Glass Panes Of 8 Mm Thickness 71 Extra For Providing Frosted Glass Panes Instead Of Ordinary Float Glass Panes In Doors, Windows And Clerestory Window Shutters. ( Area Of Opening For Glass Panes Excluding Portion Inside Rebate Shall Be Measured ) . 72 Providing And Fixing Double Action Hydraulic Floor Spring Ofapproved Brand And Manufacture Is : 6315 Marked, For Doorsincluding Cost Of Cutting Floors As Required, Embedding Infloors And Cover Plates With Brass Pivot And Single Piece M.S.With Brass Cover Plate 73 Providing And Fixing Expanded Grill Made Of Aluminum As Per Designand Drawing Having Members Section Of Size 7.5Mm X 6.0Mm Andopening Of Size 102Mm X 99Mm To Aluminum Window / Vent Withrequired Screws, Y And H Aluminium Section ( As Per Drawing ) At Theends And Middle Joints Respectively Complete In All Respect As Perdirection Of Engineer In Charge. Anodised Aluminum ( Anodised Transparent 81 Dyed To Required Shadeaccording To Is : 1868. ( Minimum Anodic Coating Of Grade Ac 15, Anodizing To Be Got Done From Approved Anodizer ) 74 Providing And Fixing 100Mm Brass Locks ( Best Make Of Approvedquality ) For Aluminium Doors Including Necessary Cutting And Makinggood Etc. Complete. 75 Stainless Steel ( Ss 304 Grade ) Adjustable Friction Window Stay. 510 X 19Mm 76 Providing & Fixing Of Ward Robe Shutters Made Out Of 19Mmthick Bwp Block Board Isi Of Superior Quality Make Withfollowing Details :-Front Side Finishing With 1Mm Thick Superior Quality Micaapproved Make And 0.8Mm Thick Approved Shade Mica In Theinner Side. Covering With Teak Wood Beading 25X12mm All Thesides Of Shutter & 35X12mm On Outer Frame For Making Goodthe Wall Joint Including Heavy Brass S.S. Fittings ( Handle200mm 2 Nos., Tower Bolt 150Mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75X40x2.5 Mm 6 Nos., Ss Hanger Rod 20Mm Dia ) Complete As Per Drawing Anddesign Approved By Engineer In Charge. 77 Providing And Fixing Stainless Steel Railing Made Of Hollowtubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainless Steel Nuts Andbolts Complete, I / C Fixing The Railing With Necessaryaccessories & Stainless Steel Dash Fasteners , Stainless Steelbolts Etc., Of Required Size, On The Top Of The Floor Or The Side Ofwaist Slab With Suitable Arrangement As Per Approval Ofengineer-In-Charge, ( For Payment Purpose Only Weight Ofstainless Steel Members Shall Be Considered Excluding Fixingaccessories Such As Nuts, Bolts, Fasteners Etc. ) .Grade 204 78 P & F Indian Type White Glazed Vitreous China Ist Quality W.C. Orissa Pan ( Is:2556 Mark ) With 100 Mm Vitreous China P Or S Trap Including Cutting And Making Good The Wall And Floor :Size 530X410mm. 79 P & F Water Closet Seat Covers With Brass Hinges Complete :Solid Pvc ( Isi Marked ) Grade-I White For Ewc. 80 P & F W.V.C. Urinal Partition Plate Of Approved Standardmake Of Size 630X315mm Including Making Good The Wall. 81 P & F Marble Urinal Partition Slab Both Sides Polished Of Approved Design Cut From Marble Size 900X600mm. 82 Makrana Ii Quality Marble Having Light Spots. 83 P & F W.V.C. Half-Round Channel Of Approved Make In C.M.1:3 Joints Finished In White Cement Of 84 Size 150 Mm Dia. 85 P & F Low Level Flushing Cistern Of 10 Litres Capacity ( Is:2556 Mark ) Of Approved Make With Complete Fittings C.I. Brackets Duly Painted, Brass Ball Cock With Ball, ( Is:1703 Mark ) Complete Including Cutting And Making Good The Wall : Wvc With C.P. Brass Bend. 86 P & F C.P. Brass Urinal Flush Pipe Set Complete With Flanged Brackets Of Approved Make. 87 For 1 Urinals. 88 P & F C.P. Brass Urinal Spreader For Stall Urinal Of Approved Make. 89 P & F Wvc Wash Basin ( Ist Quality Is:2556 Mark ) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock ( Is:8934 Mark ) & 32 Mm C.P. Brass Waste Coupling Of Approved Make 25 Mm G.I. Waste Pipe Complete Including Cutting & Making Good The Wall :Size 630 Mm X 500 Mm Dia For Counter Top. 90 Providingandfixingsuperiorqualitycpbrassfittingsofapprovedmakeasperdirectionofengineer-In-Chargeswan Neck Pillar Cock 15 Mm Nominal Size 91 Providingandfixingsuperiorqualitycpbrassfittingsofapprovedmakeasperdirectionofengineer-In-Chargesingle Lever Wash Basin Mixer With 450 Mm Long Copper Connection Pipe 92 P&F Beveled Edge Mirror Of Special Glass Of Appd Make ( Atul / Equivalent ) Complet With6mm Thick Asbestos Cemetn Sheet Ground Fixed To Wooden Scrwes & Washers.Other Sizes 93 C.P. Brass Towel Rail Elbow Type With Concealed Screws Size 450Mm ( Heavy Duty ) 94 Providingandfixingsuperiorqualitycpbrassfittingsofapprovedmakeasperdirectionofengineer-In-Chargesoap Dish 95 P&F Extension Pipe For Bib Cocks Of Approved Quality / Make: 96 -Do- 100X15mm 97 Making Connection Of G.I. Distribution Branch With G.I. Main Including All Fitting. 98 Beyond 25 Mm & Up To 100 Mm Dia. 99 Providingandfixingsuperiorqualitycpbrassfittingsofapprovedmakeasperdirectionofengineer-In-Charge 100 P & F Pillar Cocks ( Is:8934 Mark ) Of Superior Quality And Approved Make : 101 P & F Inlet Connection ( Angle Valves ) Superior Quality, Of Approved Make, For Wash Basin, Gyser Etc. -Do- With 37 Cm. Long Pipe And Nut. 102 P & F 15 Mm. Dia Connection Pipe Of Approved Quality / Make:C.P. Brass Pipe With Cp Brass Nuts Upto Length 600 Mm. 103 P & F Flush Cock / Flush Valve ( Is:9758 Mark ) Or Wc Of Approved Quality Make : 104 C.P. Brass Push Type Exposed 25 Mm Nominal Bore. 105 P & F Full-Way Valve ( Is:778 Mark ) Or Wheel Valve Of Approved Make : 106 Gun-Metal 20 Mm Nominal Bore. 107 P & F Full-Way Valve ( Is:778 Mark ) Or Wheel Valve Of Approved Make : 108 Gun-Metal 25 Mm Nominal Bore. 109 P & F Pvc Storage Tank ( Is:12701 Marked Indicating The Bis License No. ) Of Approved Make With Cover, 25 Mm Dia 1 M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug & Socket, Including Making Connection Etc. Complete Of Approved Design. 110 1000 Litres Capacity. 111 P & F G.I. Pipes ( Internal Work ) With G.I. Fittings ( Is:1239 Mark ) & M.S. Clamps Including Cutting And Making Good The Walls And Floors : 112 20 Mm Dia Nominal Bore. 113 P & F G.I. Pipes ( Internal Work ) With G.I. Fittings ( Is:1239 Mark ) & M.S. Clamps Including Cutting And Making Good The Walls And Floors : Concealed Pipe In Wall Incl. With Anticorrosive Bitumen Paint. 114 20 Mm Dia Nominal Bore. 115 P & F G.I. Pipes ( External Work ) With G.I. Fittings ( Is:1239 Mark ) Including Trenching & Refilling Earth Etc.20 Mm Dia Nominal Bore. 116 P & F G.I. Pipes ( External Work ) With G.I. Fittings ( Is:1239 Mark ) Including Trenching & Refilling Earth Etc. 117 25 Mm Dia Nominal Bore. 118 P&F Rigid Pvc Pipe ( Is:4985 Mark ) Class Ii ( 4 Kg. / Cm. ) Approved Quality / Makeincluding Joining The Pipe With Solvent Cement Rubber Ring And Lubricant 119 110Mm Dia 120 75Mm Dia 121 P&F Rigid Pvc Pipe Fittings ( Is: 4985 Mark ) Of Approved Quality / Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: 122 Coupler 123 110Mm Dia 124 75Mm Dia 125 Plain Tee 126 110Mm Dia 127 75Mm Dia 128 Bend 87.5 129 110Mm Dia 130 75Mm Dia 131 Pipe Clip 132 110Mm Dia 133 75Mm Dia 134 Gully Trap 135 110Mm Dia 136 Door Bend ( Top Side ) 137 110Mm Dia 138 Construction Of Manhole In All Type Of Soil Inner Size 90 X 60 Cm. Thick Masonry In Cm 1:6, 10 Cm. Thick Cement Concrete 1:5 10 In Foundation, 20 Mm Thick Inside Plaster In Cm 1:6, Finished With Floating Neat Cement, 50Mm Thick M-15 Grade C.C. Flooring, Making Channels, 80Mm Thick Stone Slab Covering With 40Mm Thick M-15 Grade C.C.Flooring , 25 Kg. Ci Cover With Frame Of 40Mm Dia, Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within 50 Mtr. Lead. 139 Depth Upto 0.5Mtr 140 Construction Of Chamber In All Type Of Soil With 300 Mm Thickmasonry In Cm 1:6 M, 10 Cm Thick C.C. 1:5:10 In Foundation, 20Mm Thick Insider Plaster In Cm 1:6, Finished With Floatingneat Cement, 50Mm Thick M-15 Grade C.C. Flooring , Earthwork Etc. Complete As Per Design Including Disposal Ofsurplus Earth Within A Lead Of 50 Mtr 141 Inside Size 300X300mm Depth Upto 0.5M & 5Kg C.I. Cover With Frame 142 Size 450 X 450Mm Upto Depth Of 0.5M & 15Kg Ci Cover With Frame 143 -Do- Size 600X450mm Upto Depth Of 0.5M & 38Kg Ci Cover With Frame 144 Construction Of Septic Tank In All Type Sof Soil With 40Cm Thick Masonry In Cm 1:6 15Cm Thick Cc Bed Of 1:5:10 M-15 Grade Cc Flooring & Over Stone Slab Covering, 80Mm Thick Slab Jointing Of Slab In Cm 1:3, Ralthal, Kharanja, 50Mm Thick Stone Partiton Walls, 20Mm Thick Plaster In Cm 1:6 Finished With Neat Floating Cement, 4Nos C.I. Foot Rests Of Approved Design, Two No. 450Mm Dia 25Kg Each C.I. Cover With Frame, Earth Work Etc. Complete As Per Approed Drawing Incl. Disposal Of Surplus Earth Wtihin A Lead Of 50Mtr. 145 Size 230X110x150cm ( For 20Users ) 146 Size 400X140x150cm ( For 50Users ) 147 Construction Of Open Surface Drain With 112 Mm Thick Brick Masonary In Cm 1:4, 110Mm Thick Base Concrete 1:5:10, 37Mm Thick M-15 Grade C.C. Flooring, 12 Mm 1:4 Cement Plaster On All Exposed Face Of Walls Including Top Surface Excavation & Disposal Of Earth Complete As Per Approved Design / Drawing: 148 250Mm Drain 300Mm Av. Depth 149 Providing And Fixing Unplasticized Poly Vinyl Chloride ( Upvc ) Swr Pipes Type `B For Sciland Waste Dischareg System ( Is : 13592: 1992 Marked ) Of Approved Quality / Make. 150 Construction Of Soakage Well In All Type Of Soil 300 Mm Thick Dry Masonry Top And Bottom 300 Mm Course In Cm 1:6, 80 Mm Thick Stone Slab, Jointing Of Slab In Cm 1:3, Ralthal, Kharanja, 40 Mm Thick M-15 Grade C.C. Flooring, Earth Work Complete As Per Approved Drawing Including Disposal Of Earth Within A Lead Of 50 Mtr. : 151 Size 300 Cm. Dia Outside & 300 Cm. Depth. 152 Size 240 Cm. Dia Outside & 240 Cm. Depth. 153 P&F Grating Of Approved Quality / Make 154 Stainless Steel Sheet Size 125Mm Dia 155 P&F Liquid Soap Contained With Brackets Complete Of Approved Make : 156 C.P. Brass 157 P&F Rigid Pvc Pipe ( Is:4985 Mark ) Class Ii ( 4 Kg. / Cm. ) Approved Quality / Makeincluding Joining The Pipe With Solvent Cement Rubber Ring And Lubricant 158 160Mm Dia 159 Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering =All Up To Plinth Leve1:3:6 ( 1Cement :3 Course Sand :6 Graded Stone Aggregate 20 Mm Nominal Size 160 Earth Work In Excavation In Foundation Trenches Or Drains Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 Mtr. Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 Meter.All Kinds Of Soil. 161 Earth Work In Excavation In Foundation Trenches Or Drains Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 Mtr. Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 Meter.All Kinds Of Soil.Add Extra For Foundation / Trenches / Drains For Every Additionallift Of 1.5 Mtr. Or Part Thereof In 162 Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering =All Up To Plinth Leve1:4:8 ( 1Cement :4 Course Sand :8 Graded Stone Aggregate 40 Mm Nominal Size 163 Providing And Laying In Position Specified Grade Of Cementconcrete For All Rcc Structural Elements Upto Plinth Levelincluding Curing, Compaction, Finishing With Rendering Incement Sand Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Makinggood The Joints And Cost Of Plastizers ( If Required ) Excludingthe Cost Of Centering, Shuttering And Reinforcement.M20 Grade Nominal Mix / Design Mix 164 Centering & Shuttering With Plywood Or Steel Sheets Includingstrutting, Propping Bracing Both Ways With Steel Props Andremoval Of Formwork For Upto Floor Five Level For : Walls ( Any Thickness ) Including Attached Pilasters, Buttresses Plinth And String Course. 165 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding ( Including Cost Of Binding Wire ) All Complete Up To Floor Three Level.Tremo Mechanically Treated Bars 166 Providing And Laying Cement Concrete Including Curing, Compaction Etc. Complete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Orlacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Levelling Course Etc Up To Floor Fivelevel Excluding The Cost Of Centering And Shuttering.M15 Grade Nominal Mix1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate20mm Nominal Size ) . 167 Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Raking Of Joints Etc. Complete Fine Finish: 12 Mm Thick. 168 Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Raking Of Joints Etc. Complete Fine Finish: 20 Mm Thick. 169 P&F Rigid Pvc Pipe ( Is:4985 Mark ) Class Ii ( 4 Kg. / Cm. ) Approved Quality / Makeincluding Joining The Pipe With Solvent Cement Rubber Ring And Lubricant 110Mm Dia 170 P&F Rigid Pvc Pipe Fittings ( Is: 4985 Mark ) Of Approved Quality / Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Bend 87.5 171 Painting With Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work. 172 Steel Work In Built Up Tubular Trusses Including Cutting, Hoisting ( Height Upto 10 M ) Fixing In Position And Applying Apriming Coat Of Approved Steel Primer, Welded And Boltedincluding Special Shaped Washers Etc. Complete Hot Finished Welded Type Tubes.

INR 2000 /-

INR 446560.0 /-

INR 2.23 Crore /-

Name of Work -Various Development Workin Narhar Dargah Jhunjhunu

Sl. No.	Item Description
1	Building Work :
2	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
3	Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:
4	Dismantling precast concrete or stone slabs in wall partitions etc. including stacking within 50 meter lead:
5	Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed soil to be levelled and neatly dressed : All kinds of soil
6	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
7	Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :
8	Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion)
9	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size=
10	Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
11	Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.
12	Excavating holes upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavted soil; as directed within a lead of 50 m and lift to 1.5 m
13	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 (1-Cement:6-Sand).
14	Random rubble dry stone Kharanja under floor.
15	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Columns, pillars, posts and struts etc.
16	Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members andremoval of formwork for superstructure up to 4.5 mtr aboveplinth,for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc.
17	Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix
18	Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix
19	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Tremo Mechanically treated bars
20	Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :.Cement mortar 1 : 6 (1 cement : 6 coarse sand)
21	Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand)
22	Providing and fixing Marble stone flooring table rubbed, 15- 18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete..Upto to 1500 Cm2 Tiles
23	Providing and fixing Marble stone flooring table rubbed, 15- 18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Size upto 1500 Cm2)
24	Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).Somani make etc.
25	Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete
26	Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour)
27	Size above 3600 Cm2
28	Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
29	For area of each slab from 901 to 2000 Sq.Cm :
30	(A) 25 mm thick slab.
31	Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
32	For area of each slab from 2001 to 5000 Sq.Cm
33	(A) 25 mm thick slab.
34	Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
35	For area of each slab from 2001 to 5000 Sqcm
36	Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed
37	Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed
38	Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-incharge
39	Profile "B"
40	Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of Tiron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension)
41	Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint
42	Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :
43	Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.
44	Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure "A" :
45	Decorative Teak veener both side
46	30 mm thick shutter
47	Add extra for Flush doors
48	Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured).
49	P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers.Size 600 x 450mm x 4 mm thick
50	Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plate MS 20 mm dia curtain rod with nickel plated bracket including fixing with 25x3 mm MS flat 10 cm long all complete
51	Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:
52	20 mm dia.
53	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :
54	20 mm thick.
55	Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
56	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
57	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
58	Painting with oil type wood preservative of approved brand and manufacture : New work (Two or more coats).
59	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer.
60	Applying priming coat With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood.
61	Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm).
62	Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification :
63	Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Marble work (i) Full Edge moulding
64	Marble work
65	Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
66	For Fixed portion
67	Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately).
68	Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer).
69	Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) 2835
70	Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.)with With float glass panes of 8 mm thickness
71	Extra for providing frosted glass panes instead of ordinary float glass panes in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
72	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S.With brass cover plate
73	Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
74	Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
75	Stainless steel (SS 304 grade) adjustable friction window stay. 510 x 19mm
76	Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make with following details :- Front side finishing with 1mm thick superior quality mica approved make and 0.8mm thick approved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavy brass S.S. fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos., SS Hanger Rod 20mm dia) complete as per drawing and design approved by Engineer in Charge.
77	Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).grade 204
78	P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor :Size 530x410mm.
79	P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked) grade-I White for EWC.
80	P & F W.V.C. Urinal Partition Plate of approved standard make of size 630x315mm including making good the wall.
81	P & F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.
82	Makrana II quality marble having light spots.
83	P & F W.V.C. Half-Round Channel of approved make in C.M.1:3 joints finished in white cement of
84	Size 150 mm dia.
85	P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : WVC with C.P. brass bend.
86	P & F C.P. brass Urinal Flush pipe set complete with flanged brackets of approved make.
87	For 1 Urinals.
88	P & F C.P. brass Urinal Spreader for stall urinal of approved make.
89	P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :Size 630 mm x 500 mm dia for counter top.
90	ProvidingandfixingSuperiorqualityCPBrassfittingsofapprovedmakeasperdirectionofEngineer-in-chargeSwan neck pillar cock 15 mm nominal size
91	ProvidingandfixingSuperiorqualityCPBrassfittingsofapprovedmakeasperdirectionofEngineer-in-chargeSingle lever wash basin mixer with 450 mm long copper connection pipe
92	P&F Beveled edge mirror of special glass of appd make (Atul/equivalent) complet with6mm thick asbestos cemetn sheet ground fixed to wooden scrwes & washers.Other sizes
93	C.P. brass towel rail elbow type with concealed screws size 450mm (heavy duty)
94	ProvidingandfixingSuperiorqualityCPBrassfittingsofapprovedmakeasperdirectionofEngineer-in-chargeSoap dish
95	P&F extension pipe for bib cocks of approved quality/ make:
96	-do- 100x15mm
97	Making connection of G.I. distribution branch with G.I. main including all fitting.
98	Beyond 25 mm & up to 100 mm dia.
99	ProvidingandfixingSuperiorqualityCPBrassfittingsofapprovedmakeasperdirectionofEngineer-in-charge
100	P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make :
101	P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. -do- with 37 Cm. long pipe and nut.
102	P & F 15 mm. Dia Connection pipe of approved quality/make:C.P. Brass Pipe with CP Brass nuts upto length 600 mm.
103	P & F Flush Cock/Flush Valve (IS:9758 Mark) or WC of approved quality make :
104	C.P. brass push type exposed 25 mm nominal bore.
105	P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :
106	Gun-metal 20 mm nominal bore.
107	P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :
108	Gun-metal 25 mm nominal bore.
109	P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.
110	1000 litres capacity.
111	P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :
112	20 mm dia nominal bore.
113	P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : Concealed pipe in wall incl. with anticorrosive bitumen paint.
114	20 mm dia nominal bore.
115	P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc.20 mm dia nominal bore.
116	P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc.
117	25 mm dia nominal bore.
118	P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant
119	110mm dia
120	75mm dia
121	P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:
122	Coupler
123	110mm dia
124	75mm dia
125	Plain Tee
126	110mm dia
127	75mm dia
128	Bend 87.5
129	110mm dia
130	75mm dia
131	Pipe clip
132	110mm dia
133	75mm dia
134	Gully Trap
135	110mm dia
136	Door Bend (top side)
137	110mm dia
138	Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.
139	Depth upto 0.5mtr
140	Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr
141	Inside size 300x300mm depth upto 0.5m & 5Kg C.I. cover with frame
142	size 450 x 450mm upto depth of 0.5m & 15Kg CI cover with frame
143	-do- size 600x450mm upto depth of 0.5m & 38Kg CI cover with frame
144	Construction of septic tank in all type sof soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia 25Kg each C.I. cover with frame, earth work etc. complete as per approed drawing incl. disposal of surplus earth wtihin a lead of 50mtr.
145	Size 230x110x150cm (for 20users)
146	Size 400x140x150cm (for 50users)
147	Construction of Open Surface Drain with 112 mm thick brick masonary in CM 1:4, 110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring, 12 mm 1:4 cement plaster on all exposed face of walls including top surface excavation & disposal of earth complete as per approved design/drawing:
148	250mm drain 300mm av. Depth
149	Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B" for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.
150	Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. :
151	Size 300 Cm. dia outside & 300 Cm. depth.
152	Size 240 Cm. dia outside & 240 Cm. depth.
153	P&F Grating of approved quality/ make
154	Stainless steel sheet size 125mm dia
155	P&F liquid soap contained with brackets complete of approved make :
156	C.P. brass
157	P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant
158	160mm dia
159	Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size
160	Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter.All kinds of soil.
161	Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter.All kinds of soil.Add extra for foundation/trenches/drains for every additional lift of 1.5 Mtr. or part thereof in
162	Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size
163	Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
164	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Walls (any thickness) including attached pilasters, buttresses plinth and string course.
165	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.Tremo Mechanically treated bars
166	Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
167	Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 12 mm thick.
168	Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 20 mm thick.
169	P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 110mm dia
170	P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5
171	Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
172	Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete Hot finished welded type tubes.