Tender For Repairs To The Sita Ram Jis Temple, Soron Distt. Kasganj
Tender Value
44.61 Lakhs
Estimated cost
Bid Submission
15 Mar 2023
0 days left
EMD
1.11 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
soron → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To The Sita Ram Jis Temple, Soron Distt. Kasganj As Per Tender Document
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in all kind of soilby mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.(Rate Including GST). |
| 2 | Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). of specified grade excluding the cost of centering and shuttering. as per direction of Engineer-in-charge. (Rate Including GST). |
| 3 | Centering and shuttering for Lintels, beams, plinth beams, girders, bressumers and cantilevers including strutting, propping etc. and removal of form work. (Rate Including GST). |
| 4 | Centering and shuttering for Suspended floors, roofs, landings, balconies and access platformincluding strutting, propping etc. and removal of form work. (Rate Including GST). |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate Including GST). |
| 6 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (Rate Including GST). |
| 7 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources. (Rate Including GST). |
| 8 | Providing and laying in position cement concrete of 1:2:4 (1 Cement: 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources specified grade excluding the cost of centering and shuttering - All work up to plinth level. (Rate Including GST). |
| 9 | Brick work with common burnt clayF.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate Including GST). |
| 10 | Reinforced cement concrete work with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement. (Rate Including GST). |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (Rate Including GST). |
| 12 | Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (Rate Including GST). |
| 13 | Providing 20 mm cement plaster finishedwith a floating coat of mix 1:4 (1 cement: 4 fine sand) . as per direction of Engineer - in- charge. (Rate Including GST). |
| 14 | Providing and laying vitrified floor tiles size of 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.as per direction of Engineer-in-charge. (Rate Including GST). |
| 15 | Providing and laying rectified Glazed Ceramic tiles of size 300x300 mm or more size (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Rate Including GST). |
| 16 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer\"s specification.One or more coats on old work. (Rate Including GST). |
| 17 | Providing and fixing 25 mm thick shutters for cup board etc Panelled or panelled & glazed shutters Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. (Rate Including GST). |
| 18 | 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shadeof the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand). (Rate Including GST). |
| 19 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm. (Rate Including GST). |
| 20 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Rate Including GST). |
| 21 | P/F Sanatoryand other articles required for execution of work complete. (Rate Including GST). 21-1-CPVC Pipe15mm |
| 22 | 21-2-CPVC Elbow 1/2\" |
| 23 | 21-3-CPVC Socket 1/2\" |
| 24 | 21-4-CPVC T 1/2\" |
| 25 | 21-5-T BrassG.I. 1/2 \" |
| 26 | 21-6-CPVC Solvent 250g |
| 27 | 21-7-CPVC Cupler Blass 1/2 \" |
| 28 | 21-8-Angle cock 1/2\" |
| 29 | 21-9-PVC pipe 4\" |
| 30 | 21-10-Elbow 4\" |
| 31 | 21-11-N trap 4\" |
| 32 | 21-12-PVC pipe 3\" |
| 33 | 21-13-PVC T3\" |
| 34 | 21-14-PVC Elbow 3\" |
| 35 | 21-15-PVC solvent 250g |
| 36 | 21-16-Clamp 1/2\" 1pkt. |
| 37 | 21-17-Cera/ Hindware Indian Seat (510 x 400 mm, White) floor mound |
| 38 | 21-18-Flush cistern |
| 39 | 21-19-Creamic wash basin (2\"x1.5\") |
| 40 | 21-20-Mirror with screw etc. complete (2\"x1.5\") |
| 41 | 21-21-Waste pipe |
| 42 | 21-22-Wall mound bib cock cp brass |
| 43 | 21-23-Ceramic Floor Mounted European Water Closet/Western Toilet Commode/EWC S Trap with Slim Hydraulic Soft Close Seat Cover 54cm x 35cm x 41cm - White (Cera /Hindware) |
| 44 | 21-24-Ceramic Urinal Pot for Gents (White) |
| 45 | 21-25-Angle valve 1/2\" |
| 46 | 21-26-PVC pipe 6\" dia pressure rating - 6kgf/cm2 IS/ISO 9001 : 2008 |
| 47 | 21-27-PVC Elbow 6\" |
| 48 | 21-28-PVC Socket 6\" |
| 49 | 21-29-Plug |
| 50 | 21-30-Cera / hindware quarter Turn Fittings Pillar Cock long neck (Chrome Finish) |
| 51 | 21-31-Stainless Steel 5\" Jali/Trap Floor Drain Grating for Tiolet Floor |
| 52 | 21-32-Triple layer water tank 500 ltr |
| 53 | 21-33-22\"x 18 \" Stainless steel 304 grade granite top sink for R.O plant |
| 54 | 21-34-Labour charges for fitting & small materials etc. |
| 55 | 21-35-Water cooler (250x250ltr capacity/hr) approved brand |
| 56 | P/F Electricitems required for execution of work complete. (Rate Including GST). 22-1-LED tube Light complete |
| 57 | 22-2-PVC Elbow T socket 1\" dai |
| 58 | 22-3-PVC Pipe dia 3.00 m long |
| 59 | 22-4-Copper wire 4.00 sq mm roll |
| 60 | 22-5-Copper wire 1.50 sq mm roll |
| 61 | 22-6-Copper wire 2.50 sq mm roll |
| 62 | 22-7-10 Sq mm 2 Core Copper Armoured Cable |
| 63 | 22-8-MCB 32 Amp. |
| 64 | 22-9-Modular Switch 5 Amp |
| 65 | 22-10-Modular Socket 5 Amp. |
| 66 | 22-11-Modular Switch 15 Amp. |
| 67 | 22-12-Modular Socket 15 Amp. |
| 68 | 22-13-Ceiling Fan 42\" polar /Khetan |
| 69 | 22-14-Havells Ventil Air DX 200mm Exhaust Fan (White) |
| 70 | 22-15-LED bulb 9 watt |
| 71 | 22-16-Regulator for fan |
| 72 | 22-17-Holder |
| 73 | 22-18-Celling box |
| 74 | 22-19-Screw 2 inch 144 nos in one box |
| 75 | 22-20-Round sheet for fan box |
| 76 | 22-21-Round sheet |
| 77 | 22-22-MCB Box 6v. |
| 78 | 22-23-Tape |
| 79 | 22-24-6x4\". Box with sheet complete |
| 80 | 22-25-Junction box |
| 81 | 22-26-Casing patti 3.00 m long &1.5\" |
| 82 | 22-27-Bend |
| 83 | 22-28-Labour charges for fitting & small materials as gulli, juction, tape, button etc. |
| 84 | 22-29-Solar pole light with pole Battery solar pannel complete |
| 85 | Providing & fixing of red sand stone benches having 4 legs of size (0.26x0.26x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site. (Rate Including GST). |
| 86 | Provision for Purchase and installation at site of readymade Dustbins of Red Sand Stone of Cylindrical shape in single block having top molding and depression as per design on extra surface fully open top outer top dia 580mm and height 750mm of required shape & design. (Rate Including GST). |
| 87 | Removal of malwa (after execution at site)from the Monument to outside of monument area limits charges( as directed by the engineer - incharge) using manual labour lead & lift from working site to outsite gate upto 500mtr. (Rate Including GST). |
| 88 | R.R. & Kankar Stone masonry in super structure with 80% new hard stone & 20% old stone at site in composite lime mortar 1:1:1 (1Lime :1 C. sand :1 Surkhi) mixed with composite materials including supply of all materials labour, scaffolding, T&P etc after taking out old/damaged & loose stone required for proper completion of work. (Rate Including GST). |
| 89 | Flush pointing on red sand stone with 1:1:1 ratio lime mortar(1 Lime,1 Surkhi, 1 C.sand ) mixed with composit materials with red oxide as a pigment including racking out joints etc. including supply of all materials labour, scaffolding, T&P etc required for proper completion of work. (Rate Including GST). |
| 90 | Providing & laying in position lime concrete with graded brick aggregate 20 to 25 mm size and 50% composite lime mortar 1:1:1 ratio (1 lime, 1 surkhi, 1 c. sand) mixed with composite mortar including supply of all materials ,labour, T. & P. etc required for proper completion of work. (Rate Including GST). |
| 91 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. (Rate Including GST). |
| 92 | Providing Sal wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugsor with Dash fasteners of required dia & length (hold or with dash fastener sahll be paid for separately). (Rate Including GST). |
| 93 | Providing and fixing wire gauge 35 mm thick of Second class teak wood shutters with ISI marked M.S. pressed butt hinges bright finished of required size using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws. (Rate Including GST). |
| 94 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (Rate Including GST). |
| 95 | Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm). (Rate Including GST). |
| 96 | Providing and fixing M.S.Iron window and ventilators having 50x50x6mm size angle iron frame gaded with 12mm square bars 7.5cm c/c and make provision for mosquito proof door in outer side and glazed door in inner side complete with fixing hinge , glass4 mm thick , handle and sliding bolt. (Rate Including GST). |
| 97 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand). (Rate Including GST). |
| 98 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :Flush/ Ruled pointing. (Rate Including GST). |
AI Tender Summary
Tender Timeline
Feb 21, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender