Tender For Repairing Of Kv Primary And Secondary School Building At Loktak.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Mar 2023
0 days left
EMD
36000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
loktak → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Of Kv Primary And Secondary School Building At Loktak.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.6.1 in cement mortar. |
| 2 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in charge.15.1.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). |
| 3 | Dismantling doors, windows and clerestory windows ventilators etc. (wood or steel) shutters including choukhats, architraves, holdfasts and other attachment etc. complete and stacking them within 50 m lead. |
| 4 | Dismantling cement asbestos celotex/hard board in ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead. |
| 5 | Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of. 15.25.1 G.S. Sheet |
| 6 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 7 | 12 mm cement plaster finished with a floating coat of neat cement of mix (13.7.1) 1:3(1 cement : 3 fine Sand. |
| 8 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (framework to be paid separately): (12.22.1) Natural colour insulating board (12.22.1.1) 12 mm thick |
| 10 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.13.63.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 11 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour: 13.59.2 Two Coats |
| 12 | Finishing walls with water proofing cement paint of required shade.13.32.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately 9.1.3 Local best quality Tolhao wood. |
| 14 | Providing & fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling tor panelled or panelled and glazed shutters 25 mm to 40 mm thick: 9.6.2 Local best quality Tolhao wood. |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :9.6.3 Float glass panes9.6.3.1 4 mm thick glass panes. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:14.42.2 One or more coats on old work. |
| 17 | Providing and fixing precoated galvanised iron profile sheets (size safe and pitch of corrugation as approved by engineer-in-charge) with zinc coating 120gms / sqm as per IS:277, in 240 mpa steel grade 5-7 micron epoxy primer on both side of the sheet and the polyester top coat 15-18 microns. Sheets should have protected guard film of 25 microns minimum to avoid scratch during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curve surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with 12.46.2 Precoated galvanised iron profile sheets 0.40 mm thick. |
| 18 | Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. :12.2.3 0.63 mm thick |
| 19 | Gutter (600 mm over all girth). 12.47.6.3 Precoated galvanised iron profile sheets 0.40 mm thick. |
| 20 | Providing and fixing precoated galvanised steel sheets roofing accessories, zinc coating 120gsm as per IS:277, in 240 mpa steel grade 5-7 micron epoxy primer on both side of the sheet and the polyester top coat 15-18 microns using self-drilling /self-tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete 12.47.1 Ridge plain (500-600mm) 12.47.1.3 Precoated galvanised iron profile sheets 0.40 mm thick. |
| 21 | Providing and laying vitrified floor tiles in different size (thickness to be specified by the manufacturer) with water absorptions less than 0.08 % and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 11.32.1 Size of tiles 600x600 mm. |
| 22 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture of approved make in all colours , shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dodos over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarsed sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.2.1 40mm thick with 20mm nominal size stone aggregate. |
| 24 | Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. |
| 25 | Floor painting with floor enamel paint of approved brand and manufacture to give an even shade 13.47.1 Two or more coat on new work. |
| 26 | Providing and fixing 20mm plank as eave board with 9.76.2 Tolhao/Uchan wood. |
| 27 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 28 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1All kinds of soil. |
| 29 | Providing and laying in position cement concrete of specified grade of reinforced cement concrete excluding the cost of centering and shuttering finishing and reinforcement - All work upto plinth level: 5.1.2 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 30 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.20.1 thermo mechanically treated bars |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. |
| 32 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement: 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size). |
| 33 | Add EPF @ 3.25% |
| 34 | Add CESS @ 1% |
| 35 | Add GST @ 18% |
AI Tender Summary
Tender Timeline
Feb 21, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender