Tender For Remaining Work Of Upgradation-Renovation Of Hptdc Hotel Spiti At Kaza Distt. Lahaul - Spiti (H.P).
Tender Value
1.34 Crore
Estimated cost
Bid Submission
28 Feb 2023
0 days left
EMD
2.69 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
spiti → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Remaining Work Of Upgradation-Renovation Of Hptdc Hotel Spiti At Kaza Distt. Lahaul - Spiti (H.P).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling/removing doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking useful materials in specified dimensions as per the direction of Engineer-In-Charge including disposal of unservicebale materialsof area 3 sq. metres and below. |
| 2 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below and stacking useful materials in specified dimensions as per the direction of Engineer-In-Charge including disposal of unservicebale materials. |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead and lift as per the directions of Engineer-In-ChargeFor thickness of tiles 10 mm to 25 mm |
| 4 | Demolishing cement concrete manually/ by mechanical means including disposal of unserviceable material within all lead as per direction of Engineer-in-charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable materialin specified mannersand disposal of unserviceable material within all lead as per direction of Engineer-in-charge. In cement mortar |
| 6 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials as per the direction of Engineer-In-Charge lead including carriage of materials within all leads, lifts and heights. |
| 7 | Dismantling roofing including ridges, hips, valleys and gutters etc., andincluding stacking of serviceable materials and disposal of unserviceable materials as per the direction of Engineer-In-Charge of G.I. Sheet including carriage of materials within all leads, lifts and heights. |
| 8 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials within all leads and lifts. |
| 9 | Cutting in earth work by mechanical mean in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer in-charge at site, according to the HP.PWD norms. |
| 10 | Excavation work of all kind of soil by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils within all lead and lifts as per the diretion of Engineer in Charge at site. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)including carriage of materials within all lead andliftsas per the diretion of Engineer in Charge. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:6:12 (1 cement : 6 fine sand : 12 graded stone aggregate 40 mm nominal size) including carriage of materials within all lead andliftsas per the diretion of Engineer in Charge. |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutteringall work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)including carriage of materials within all leadand liftsas per the diretion of Engineer in Charge. |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Hot rolled deformed barsincluding carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. Fe 500/Fe 500D Tata/Sail/Jindal /Panther /JSPL / Shyam steel or as approved by HPTDC |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 19 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 20 | Stone soling properely hand packed filling interstics with spalls and consolidating with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100mm spread thickness (finished work including materials and labour)including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge. |
| 21 | Stone filling behind retaining walls as per the direction of Engineer-In-Chargeincluding carriage of materials in all leads, lifts and heights. |
| 22 | Providing and fixing 1st class deodar wood work in frames of doors, windows, clerestorywindow and other frameswrought, framed and fixed in position including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 23 | Providing and fixing 40mm thick 1st Class Deodarwood in panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including bright finished /black enamelled iron butt hinges with necessary screw including carriage of materials including carriage of materials within all leads, lifts and heights. |
| 24 | Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked,to frame, backing or studding with screws etc. complete ( Frames, backing ortudding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12mm thick confirming to IS:14587 including carriage of materials including carriage of materials within all leads, lifts and heights. |
| 25 | Providing and fixing 40mm thick 1st class deodar wood in wire gauge shutters using galvanised M.S. wire of I.S. guage designation 85 G with wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads, lifts and heights. |
| 26 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)including carriage of materials in all leads, lifts and heights. |
| 27 | Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 28 | Providing and fixing plain multipurpose cement board (Hight ressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board as per IS: 14862 including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 29 | Providing and fixing plain square edge teak wood readymade cover fillets (Beading) 35x10mm section with wood screws in ceiling and lining including metering at junctions including carriage of materials in all leads,lifts and heights. |
| 30 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50 mm (base and height)including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 31 | Providing and fixing teak wood readymade corners 72x72mm section with wood screws in ceiling and lining including metering at junctions including carriage of materials in all leadslifts and heights. |
| 32 | Providing and fixing 12mm thick imported pine wood plain lining with tongued and grooved joining and screws (Framework and cover fillets to be measured and paid for separately) including carriage of materials in all leadslifts and heights. |
| 33 | Providing and fixing12mm thick water proof ply wood ply wood lining with butt jointing and nails to make the wall surface smooth for fixing of imported wood plain lining (Framework and cover fillets to be measured and paid for separately) including carriage of materials in all leadslifts and heights.. |
| 34 | Providing and fixing teak wood readymade corners 25X25 mm section with wood screws in ceiling and lining including metering at junction including carriage of material in all leadlifts and heights. |
| 35 | Providing and fixing Pergo Laminated wooden flooring having classification of USC 33/23 with a surface abrasion resistance as per EN13329 class AC5 exclusively crystal clear layer of aluminum oxide particles top coat and a surface improved scuff resistance and outstanding resistance to micro scratches having locking arrangements with an underlayment of natural colour foam with other accessorieslike skirting end profile, reducer, stair nosing under layeretc. complete in all respect i/c carriage of materials in all leads, lifts and heights as per the direction of Engineer-In-Charge. |
| 36 | Providing and fixing bright finished stainless steel mortice latch and lock and a pair of levers, handles set with necessary screws of standard quality approved by the Engineer-in-charge with a pair or key including carriage of materials in all leads lifts and heights. Godrej or equivalent make. |
| 37 | Providing and fixing bright finished stainless steel mortice latch with a pair oflevers, handles with necessary screws etc. complete (Indian make of standard quality as approved by the Engineer-in-charge including carriage of materials in all leadslifts and heights,Godrej or equivalent make. |
| 38 | Providing and fixing bright finished stainless steel sliding door bolts of apprved make complete withnuts and screws etc. complete including carriage of materials in all lead, lift and heightsGodrej or equivalent make. a) 250x16mm. |
| 39 | Providing and fixing bright finished stainless steel tower bolts (barrel type) of approved make with nuts and screws etc. complete including carriage of materials in all lead, lift and height. Godrej or equivalent make. a) 250x10mm. |
| 40 | Providing and fixing bright finished stainless steel tower bolts (barrel type) of approved make with nuts and screws etc. complete including carriage of materials in all lead, lift and height. Godrej or equivalent make. b) 200x10mm. |
| 41 | Providing and fixing bright finished stainless steel tower bolts (barrel type) of approved make with nuts and screws etc. complete including carriage of materials in all lead, lift and height. Godrej or equivalent make. c) 150x10mm. |
| 42 | Providing and fixing bright finished stainless steel tower bolts (barrel type) of approved make with nuts and screws etc. complete including carriage of materials in all lead, lift and height. Godrej or equivalent make. d) 100x10mm. |
| 43 | Providing and fixing bright finished stainless steel handles of approved make with screws etc. complete including carriage of materials in all lead, lift and height Godrej or equivalent make. a) 250mm. |
| 44 | Providing and fixing bright finished stainless steel handles of approved make with screws etc. complete including carriage of materials in all lead, lift and height Godrej or equivalent make. b) 200 mm. |
| 45 | Providing and fixing bright finished stainless steel handles of approved make with screws etc. complete including carriage of materials in all lead, lift and height Godrej or equivalent make. c) 150mm. |
| 46 | Providing and fixing bright finished stainless steel floor door stopper of approved make with rubber cushion screws etc. to suit shutter thickness completeheavy duty including carriage of materials in all lead, lift and height.Godrej or equivalent make. |
| 47 | Providing and fixing bright finished hard drawn stainless steel hook & eye of approved make including carriage of materials in all lead, lift and height.Godrej or equivalent make. |
| 48 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials in all lead, lift and height. 300x16 mm |
| 49 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials in all lead, lift and height. b) 250 x 16 mm |
| 50 | Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all lead, lift and height. :250x10 mm |
| 51 | Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all lead, lift and height.b) 200 mm x 10 mm |
| 52 | Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all lead, lift and height.c) 150 mm x 10 mm |
| 53 | Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all lead, lift and height.d)100 mm x 10 mm |
| 54 | Providing and fixing aluminium handles, ISI marked,anodised anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all lead, lift and height. a) 125 mm |
| 55 | Providing and fixing aluminium handles, ISI marked,anodised anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all lead, lift and height.b) 100 mm |
| 56 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. including carriage of materials in all lead, lift and height. |
| 57 | Providing and fixing 1st class deodar wood eves board 200x25mm thick including fixing in position; including carriage of materials in all leadslifts and heights. |
| 58 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty a)Float glass panes of nominal thickness 4mm (weight not less than 10kg/sqm) including carriage of materials in all leadslifts and heights. |
| 59 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty b)Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) including carriage of materials in all leadslifts and heights. |
| 60 | Providing and laying colored glazed tiles (Nitco/ Kajaria/ RAK) in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1cement:3sand) 300x300mm/ 450x450mm size finished with flush Pointing in white cement upto all floorincluding carriage of materials in all leadslifts and heights as per the direction of Engineer-In-Charge. |
| 61 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete flooring with bricks of class designation. Size of Tile 600x600 mm including carriage of materials in all leadslifts and heights as per the direction of Engineer-In-Charge. |
| 62 | Providing and laying colored glazed tiles (Nitco/ Kajaria/ RAK) in skirting, risers of steps and dado 450x300mm size laid over 12 mm thick cement mortar 1:3(1cement:3sand) and jointed with cement slurry including carriage of materials in all leadslifts and heights as per the direction of Engineer-In-Charge. |
| 63 | 20 to 25mm thick average Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 64 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4(1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black,Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 65 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work |
| 66 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer andtwo coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 67 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m² including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 68 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete :1.60 mm thick with zinc coating not less than 350 gm/m² including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 69 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 70 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. b) In trusses and trussed purlins in buildings.Hot finished welded type tubes including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 71 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 72 | Applying priming coat:With ready mixed red oxide zinc chromateprimer of approved brand and manufacture on steel galvanised iron/ steel works including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 73 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 74 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 75 | Applying priming coat With ready mixed pink or Grey primer ofapproved brand and manufacture on wood work (hard and soft wood) including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 76 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 77 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 78 | Polishing two or more coats withMalamine polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 79 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 80 | Providing and applying white cement based putty of average hickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 81 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture,including applying additional coats wherever required, to achieve even shade and colour including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. Two coats |
| 82 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 83 | Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 84 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture,including applying additional coats wherever required, to achieve even shade and colour including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. Two coats |
| 85 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50grams/ litre of approved brand and manufacture to given an even shade :Old work (one or more coats) including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 86 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand,including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. |
| 87 | Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On bituminous surface @ 0.30 Kg / sqm and as per the direction of Engineer-In-Chargeincluding carriage of materials within all leads and lifts. |
| 88 | Providing and laying Bituminous macadam using crushed stone aggregates of specified grading, premixed with bituminous binder, transported to site by tippers, laid over a peviousaly prepared surface with paver finisher equiped with electronic sensor to the required grade level and alignment and rolling with smooth wheeled, vibratory and tandem rollersas per specification to achieve the desired compaction and density complete and as per specification/direction of Engineer-in-Charge 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity including carriage of materials within all leads and lifts. |
| 89 | Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) and waste plastic additive @ 8% (percentage by weight of bitumen) prepared in Batch Type Hot Mix Plant of 100- 120 TPH capacity. |
| 90 | Providing & fixing to wall ceilling & floor Al. composite pipe of KITCH/JINDAL/ NEXT GEN make tube fittings & clamps including insulation of these pipes including making good the wall, ceiling & floor & carriage of material in all lead & lifts. (a) 15 mm nominal bore |
| 91 | Providing & fixing to wall ceilling & floor Al. composite pipe of KITCH/JINDAL/ NEXT GEN make tube fittings & clamps including insulation of these pipes including making good the wall, ceiling & floor & carriage of material in all lead & lifts. (b) 20 mm nominal bore |
| 92 | Providing and fixing high pressure PVCspigot and socket, waste and ventilating pipes ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights.(a)75 mm dia |
| 93 | Providing and fixing high pressure PVCspigot and socket, waste and ventilating pipes ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (b) 110mm dia |
| 94 | Providing and fixingPVCplain bend ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (a) 75 mm dia |
| 95 | Providing and fixingPVCplain bend ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (b) 110 mm dia |
| 96 | Providing and fixingPVCdoor bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (a) 75 mm dia |
| 97 | Providing and fixingPVCdoor bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (b) 110 mm dia |
| 98 | Providing and fixingPVCsingle equal branch plain (plain tee) ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (a) 75 mm dia |
| 99 | Providing and fixingPVCsingle equal branch plain (plain tee) ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (b) 110 mm dia |
| 100 | Providing and fixingPVC double equal branch (door tee)ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (a) 75 mm dia |
| 101 | Providing and fixingPVC double equal branch (door tee)ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (b) 110 mm dia |
| 102 | Providing and fixingPVCcollers ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (a) 75 mm dia |
| 103 | Providing and fixingPVCcollers ISI marked including fixing withapproved adhesive etc. complete including carriage of material in all leads, lifts and heights. (b) 110 mm dia |
| 104 | Providing and fixing PVC floor trap ISI marked of self cleaning designincluding fixing withapproved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads, lifts and heights.i) 110 mm. |
| 105 | Providing and fixing brass full way valve with wheel including carriage of material in all leads, lifts and heights. 15mm |
| 106 | Providing and fixing brass full way valve with wheel including carriage of material in all leads, lifts and heights. 20mm |
| 107 | Providing and fixing G.I./M.I Union of following sizes including carriage of material in all leads, lifts and heights 15mm |
| 108 | Providing and fixing G.I./M.I Union of following sizesincluding carriage of material in all leads, lifts and heights 20mm |
| 109 | Providing and fixing snow white vitreous chinawash down water closet (European type W.C. pan) with integral “P”or “S”trap with flushing cistern and seat cover complete set including jointing the trap with soil pipe in cement mortar 1:1 (1cement :1sand). Cera Make Cat No. S1013136, B1530101 or equivelent make of Jal/Jaquar makeincluding carriage of materials in all leadlifts and heights. |
| 110 | Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. nuts and bolts painted white including cutting hole and making good the same but excluding fittings including carriage of materials in all lead,lifts and heights. a) Flat back: (White) with pedestal Cera Make (SEASOR) series CAT NO. S2040101-52090101 or equivelent make of Jal/Jaquar make |
| 111 | Providing and fixing C.P. grating 100mm for gully, floor or Nahni trap including carraige of materials in all leads, lifts and heights. |
| 112 | Providing and fixing C.P. brass waste for wash basin and sink including carriage of materials in all leads, lifts and heights. |
| 113 | Providing and fixing C.P. Towell rail coplete with C.P. brackets fixed to wooden pluges with C.P. screws :-600mm x 20mmm including carriage of materials in all leads, lifts and heights. Ceramake CAT No. F5001103 or equivelent make of Jal/Jaquar make |
| 114 | Providing and fixing C.P. Towell rings 150mm dia. including carriage of materials in all leads, lifts and heights CERA make F 5001105 or equivelent make of Jal/Jaquar make. |
| 115 | Providing and fixing 5mm beveled edge mirror of superior glass fixed with studs & washers on the wall tiles including carriage of materials in all leads lifts and heights. |
| 116 | Providing and fixing C.P. brass single hole wash basin mixer including carriage of materials in all leads, lifts and heights. CERA make CAT No. F-1014451 or equivelent make of Jal/Jaquar make |
| 117 | Providing and fixing C.P. brass bib tap long body 15 mm dia with capstans head including carriage of materials in all leads, liftsand heights. CERA make CAT No. F-1001151 or equivelent make of Jal/Jaquar make |
| 118 | Providing and fixing C.P.brass paper holder including carriage of materials in all leads, lifts and heights. CERA make CAT No. F-5004109 or equivelent make of Jal/Jaquar make. |
| 119 | Providing and fixing c.p. brass angle valve 15mm without Nuts and pipe including carriage of materials in all leads, lifts and heights. CERA make CAT No. F-1012201 or equivelent make of Jal/Jaquar make. |
| 120 | Providing and fixing C.P.brass soap tray fixed with CP brass brackets fixed to wooden cleats with screws including carriage of materials in all leads, lifts and heights. CERA Make CAT No. F-5004106 or equivelent make of Jal/Jaquar make |
| 121 | Providing and fixing C.P. hand jet (Health faucet) with necessary fittings nails and screws complete including carriage of materials in all leads, lifts and heights. CERA Make CAT No. F-8030401 or equivelent make of Jal/Jaquar make. |
| 122 | Providing & fixing C.P. towel rack includingcarriage of materials in all leads, lifts and heights. CERA Make CAT No. F-5003102 or equivelent make of Jal/Jaquar make. |
| 123 | Providing & fixing rob hooks including carriage of materials in all leads lifts and heightsCERA Make CAT No. F-5003108 or equivelent make of Jal/Jaquar make. |
| 124 | Providing and fixing wall mixing faucet three in 3-way system with overhead showerand 115 mm long bend pipe including carriage of materials in all leads, lifts and heights. CERA Make CAT No. F-2008403 or equivelent make of Jal/Jaquar make. |
| 125 | Providing and fixingPVC connection pipe with brass unions :-45 cms length :-15mm nominal bore including carriage of materials in all leads, lifts and heights. |
| 126 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (a) 2000 litres net capacity tankincluding carriage of materials within all lead,lifts and heights as per the diretion of Engineer in Charge. Tata/Sintex/Jai Hind or equivalent make |
| 127 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials in all leads, lifts and heights & as per the direction of Engineer-In-Charge. |
| 128 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of material in all leads & lifts.Make:-PVC pipe:-Diplast/Polyplast, Wire:- Havell\"s/ L&T/KEI, Switch:-Havell\"s/Legrand/Anchor Panasonic Group A |
| 129 | Group C |
| 130 | Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as requiredincluding carriage of material in all leads & lifts.Make:-PVC pipe:-Diplast/Polyplast, Wire:- Havell\"s/ L&T/KEI, Switch:-Havell\"s/Legrand/Anchor Panasonic Group B |
| 131 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required including carriage of material in all leads & lifts.Make:-PVC pipe:-Diplast/Polyplast, Wire:- Havell\"s/ L&T/KEI,2 x 1.5 Sq. mm. |
| 132 | 2 x 4.0 Sq. mm. |
| 133 | 2 x 10 Sq. mm. |
| 134 | Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as requiredincluding carriage of material in all leads & lifts.Make:-PVC pipe:-Diplast/Polyplast, Wire:- Havell\"s/ L&T/KEI, 4 x 10 Sq. mm.. |
| 135 | Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of material in all leads & lifts.Make:-PVC pipe:-Diplast/Polyplast, Wire:- Havell\"s/ L&T/KEI. |
| 136 | Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as requiredincluding carriage of material in all leads & lifts.Make:-Wire:- Havell\"s/ L&T/KEI. 2 Pair |
| 137 | Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required including carriage of material in all leads & lifts.Make:-PVC pipe:-Diplast/Polyplast, Wire:- Havell\"s/ L&T/KEI. |
| 138 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as requiredincluding carriage of material in all leads & lifts.Make:-Havell\"s/Legrand/L&T/Anchor Panasonic |
| 139 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as requiredincluding carriage of material in all leads & lifts.Make:-Havell\"s/Legrand/L&T/Anchor Panasonic. |
| 140 | Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacitywith 4 No. copper strip bus-bars each of length 900 mm & cross-sectional area (25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (980mmx450mmx150mm) nominal with all accessories including connections, earthing the body etc. as required including carriage of material in all leads & lifts.Make:-Havell\"s/C&S/L&T |
| 141 | Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as requiredincluding carriage of material in all leads & lifts.Make:-Havell\"s/C&S/L&T. 200 Amp.Category-A |
| 142 | Providing and fixing following rating, four pole, 415 volts, On-Load change over switch unit, AC 23 A duty, sheet steel enclouser, with side handle operationincluding drilling holes in the cubical, making connections, etc. as requiredincluding carriage of material in all leads & lifts.Make:-Havell\"s/C&S/L&T. 200 Amps. |
| 143 | Supplyinganderection of 6amps. to 32 amps. rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of material in all leads & lifts.Make:-Havell\"s/Legrand/L&T. Single pole. Cat-A. |
| 144 | Supplyinganderection of 40/50/63 amps rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of material in all leads & lifts.Make:-Havell\"s/Legrand/L&T. Double pole. Cat-A. |
| 145 | Supplyingand fixingoffollowingway, singlepoleandneutral sheetsteel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of material in all leads & lifts.Make:-Havell\"s/Legrand/L&T. a) Double door-4 way |
| 146 | b) Double door-8 way |
| 147 | c) Double door-12 way |
| 148 | d) Double door-16 way |
| 149 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as requiredincluding carriage of material in all leads & lifts. Make:-Havell\"s/Spherehot/Usha35 Liter capacity water heater (Cat-A) |
| 150 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required including carriage of material in all leads & lifts. Make:-Havell\"s/Crompton/Usha.Exhaust Fan, Light duty, (Domestic) 225 mm sweep |
| 151 | Exhaust Fan, Heavy duty, 300 mm sweep |
| 152 | Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required including carriage of material in all leads & lifts. Make:-Anchor Panasonic/Havell\"s/Cona |
| 153 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as requiredincluding carriage of material in all leads & lifts.Make:-PVC pipe:-Diplast/Polyplast. a) 20 mm dia |
| 154 | b) 25 mm. dia |
| 155 | c) 50 mm. dia |
| 156 | Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as requiredincluding carriage of material in all leads & lifts.Make ;-Havell\"s/Legrand/Anchor Panasonic. Telephone socket outlet, Modular. |
| 157 | TV. Socket outlet, modular. |
| 158 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required sizein all leads & lifts (Havell\"s/Phenolix/KEI/Kent make) Armoured cable 10 sq. mm (four core) |
| 159 | Armoured cable 10 sq. mm (two core) |
| 160 | Supplying & fixing surface/recess DOWN LIGHT 12 W warmwhite LRD light with aluminium housing,complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Makes:- Bajaj/Havell\"s/Philips or its equivalent as approved by the Engineer-in-Charge |
| 161 | Supplying & fixing12 Watt LED recess panel light warm white complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.Makes:- Bajaj/ Havell\"s/Philips/Anchor Panasonic or its equivalent as approved by the Engineer-in-Charge |
| 162 | Supplying andfixing of fancy wall bracket required Decorative wall light fixture made up of Polycarbonate,suitable for 9W/12W retrofit LED Lamp B22 base, up to 1 N x 9 W/12W LED Lamp. Havells LHDL02160099/Philips/Jaguar/Anchor Panasonic make or as approved by the Engineer-in-charge. |
| 163 | Supplying and erection of Galvanized Iron (G.I.) octagonal pole suitable for LED Solar Light (200x200x12 mm) of 4 meter length top dia., 70 mm, bottom dia 130 mm,thickness 3 mm, including fixing up to a given depth below G/L. The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm upto G/L.The outer surface of the plinth to befinished with 1:3 cement plaster 6 mm thick, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coatcomplete in all respects as required including carriage of material in all leads & lifts. Make:- Bajaj/Cromton/Philips/Anchor Panasonic make |
| 164 | Supplying and fixing smart integrated Solar all in one Street light 15 watts with built in Mono Crystalline panel, Lithium Ferro Phosphate (LiFePO4) Battery, MPPT charge controller and sensor with colour temperature 6000-6500 complete with all accessories but including LED lamp including making connections, testing etc. as required including carriage of material in all leads & lifts Bajaj/Philips/Havell\"s/ Anchor Panasonic make or as approved by the Engineer-in-charge. |
| 165 | Providing and fixing sleek and decorative strip type LED tube fixture 4 feet warm white with built in electronic circuit and suitable for 20 watts with milky acralic diffuser , complete with all accessories connections, testing and commissioning etc. as required including carriage of material in all leads & lifts Bajaj/Philips/Havell\"s/Anchor Panasonic make or as approved by the Engineer-in-charge. |
| 166 | Providing and fixing sleek and decorative strip type LED tube fixture 2 feet warm white with built in electronic circuit and suitable forwatts with milky acralic diffuser , complete with all accessories connections, testing and commissioning etc. as required including carriage of material in all leads & lifts Bajaj/Philips/Havell\"s/Anchor Panasonic make or as approved by the Engineer-in-charge. |
| 167 | Supplying and fixing of Fancy Brass Bed side light single swivel light with cotten shade of ivory colour with thread/pin type holder with built inswitche to control the light suitable for 09 watts lamp complete with all accessories includingLED lamp 09 watts warm whiteandmaking connections, testing etc. as requiredin all leads & lifts Decon make or it\"s equivalent as approved by the Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Feb 21, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender