Public Works Department-PWD has published Tender For Road Safety Work On Various Link Roads Falling In Mc Mallanwala Tehsil Zira, District Ferozepur.Category A And B. Submission Date for this Tender is 07-03-2023. Road Work Tenders in ferozepur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Feb-2023 | Addition in Technical Condition | Other | 07-03-2023 |
| Sl. No. | Item Description |
| 1 | Road Marking with Thermoplastic Compound Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications |
| 2 | Rumble Strips with thermoplastic road marking (a) Providing and making rumble strips 15-20mm high at centre, 250mm wide placed at 1m centre to centre over freshly laid bituminous layer by using close graded premix surfacing material type B at approved locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 of MORT&H specifications |
| 3 | Cautionary sign board 600x600x600mm triangular as per IRC 67- 2012 with high intensity Microprismatic grade Sheeting Type IV as per ASTM D 4956-09 and as per IRC 67 – 2012. fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy riverts @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mmmm conforming to IS 4923 with cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. A 7 years warranty as per clause 6.9 of IRC 67-2012 for Type IV retro reflective sheeting from the manufacturer & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted |
| 4 | Mandatory sign board 600mm circular as per IRC 67- 2012 with high intensity Microprismatic grade Sheeting Type IV as per ASTM D 4956-09 and as per IRC 67 – 2012. Fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy riverts @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. A 7 years warranty as per clause 6.9 of IRC 67-2012 for Type IV retro reflective sheeting from the manufacturer & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67- 2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted. |
| 5 | Definition Plate 600x200mm rectangular as per as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. specifications. Fixed over 3mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame welded with vertical post of sign board complete as per clause 801 of MORT&Hspecifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 (b) Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 |
| 6 | Moulded Shank Road Stud Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications. |
| 7 | Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade Sheeting Type IV as per ASTM D 4956-09 and IRC 67 2012, fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy riverts @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground including foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications |
| 8 | Providing & Fixing of convex mirror of 600mm on important sports |
| 9 | Informatory sign board 600x450mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable sizealuminium alloy riverts @ 200 mm c/c to backsupport frame of 25x25x3mm angle iron supported on a square hollow steel section post60x60x3.2mm conforming to IS 4923 without costof definition plate firmly fixed to ground infoundation concrete M-25 of size 0.45x0.45x0.60mfor vertical post complete as per clause 801 of MORT&H specifications. A 10 years warranty as per clause 6.9 of IRC 67-2012 for Type XI retro reflective sheeting from the manufacturer & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67- 2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted |
| 10 | Informatory sign board 600x600mm square as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 – 09 and as per IRC 67 – 2012. with retro reflective high intensity microprismatic grade sheeting fixed over 3mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy riverts @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a squareb hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plat e firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. A 10 years warranty as per clause 6.9 of IRC 67-2012 for Type XI retro reflective sheeting from the manufacturer & acertified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67- 2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted |
| 11 | Painting two or more coats excluding primiring coat with synthetic enamel pain in all shaes on wood work metallic or plastered concerete surface to give on even shade (for parapet & culverts) |
| 12 | Ist class B.B work in cement mortar 1:5 in foundation & plinth complete as per PWd specifications (for Parapets & culverts) |
| 13 | Cement pointing 1:2 deep variety complete as per PWD specifications (for Paraperts and culverts) |
| 14 | Providing & fixing high intensive reflective tape of 3M or equivelant as per MORT & H/IRC specifications at various locations as per direction and satisfaction of the Engineer-in-charge(for Paraperts and culverts) |
| 15 | Add 1% Heritage & Cultural Cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
