}

Tender For Repair/Maintenance Of B/R Items, Joinery, Periodical Service And Allied Works In Technical, Residential, Parachute Building And Auditorium At Adrde Agra Under Ge I Rnd Delhi, agra-Uttar Pradesh

Military Engineer Services has published Tender For Repair/Maintenance Of B/R Items, Joinery, Periodical Service And Allied Works In Technical, Residential, Parachute Building And Auditorium At Adrde Agra Under Ge I Rnd Delhi. Submission Date for this Tender is 25-04-2023. Coats and Jackets Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

36367153
Corrigendum : Tender For Repair/Maintenance Of B/R Items, Joinery, Periodical Service And Allied Works In Technical, Residential, Parachute Building And Auditorium At Adrde Agra Under Ge I Rnd Delhi
Tender
Indian
Uttar Pradesh
Agra
25-04-2023

Tender Details

Tender For Repair / Maintenance Of B / R Items, Joinery, Periodical Service And Allied Works In Technical, Residential, Parachute Building And Auditorium At Adrde Agra Under Ge I Rnd Delhi- 1 Taking Down Cement Plaster On Brick / Stone Walls Etc Any Description Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water Etc Complete All As Specified And Directed. 2 M&L For Rendering 15Mmthick Plaster On Any Faces Of Brick Work In Cm 1:6 Finished Even And Fair Complete All As Specified And Directed. 3 M&L Rendering 15 Mm Thick Plaster On Fair Faces Of Brick / Concrete Surfaces As In Cm 1:4 Mixed With Wpc Finished Surfaceeven And Fair Complete All As Specified And Directed.Note : Wpc Shall Be Measured And Paid Separately As Supply Only. 4 M&L For Rendering 10Mmthick Plaster On Concrete Surfaces Of Ceiling In Cm 1:3 Finished The Surface Fair & Even Complete All As Specified And Directed. 5 M&L For Rendering Plaster 15Mmthick On Concrete Surfaces Of Walls In Cm 1:3 And Finished The Surface Fair & Smooth With Using Using Wpc And Applying Neeru Finish To Plasteredsurfaceas In Water Tanks Etc Complete All As Specified And Directed.Note: Wpc Shall Be Measured And Paid Separately As Supply Only. 6 M&Lfor Preparation Of Newly Plastered Surfaces And Applying 3 Coats Of White Wash On Ceiling Including Complete All As Specified And Directed. 7 M&L For Preparation Of New Plastered Of New Plastered Surface Of Walls And Applying 2Mm Thick Wall Care Putty In Two Layers ( Each Layer Minimum 1Mm Thick ) Complete All As Specified And Directed. 8 M&L For Preparation Of New Plastered Surface Of Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Primer Complete All As Specified And Directed. 9 M&L For Preparation Of New Plastered Surfaces Of Walls And Applying Two Or More Coats Of Acrylic Smooth Exteriorpaint Of Required Shade And Applied Over A Coat Of Exterior Primer @ 2.20 Kg / 10 Sqmcomplete All As Specified And Directed. 10 M&L For Complete Removal Of The Existing Surface Of Walls And Applying Two Coats Of White Wash Complete All As Specified And Directed. 11 M&L For Preparation Of Oldplastered Surfaces Of Walls And Applying Two Coats Of Exterior Emulsion Paint Complete All As Specified And Directed. 12 M&L Complete Removal Of Existing Treatment Of Wall Including Cornices Etc And Making Good By Filling Holes And Applying Two Coat Of Oil Bound Distemper Over A Coat Of Primer Complete All As Specified And Directed. 13 M&L For Preparation Of Old Painted Wood And Wood Based Surface Of Any Description Not Otherwise Discribed Over 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. 14 All As Per Item Ser No 13.00 Above But On Old Painted Steel Or Iron Surface. 15 Supply Only Integral Water Proofing Compound Complete All As Specified And Directed. 16 S&F In Repair Mild Steel Work As In Framed Brakets Of Angles Or Tees With Web And Flanges Out To Shape, Drilled And Countersunk For Screw, Including Bending And Welding Angles As Necessary Gusset Plates, Riveting Etc Not Exceeding 10 Kg Each Bracket Conferming To Fe-410 Or Fe-310-0 Complete All As Specified And Directed. 17 M&L For 40 Mm Thick Sand Stone Slabs In Shades, Chajjas, Shelves Etc Not Exceeding 2M Lengh, Punched Dressed On Face And Along Exposed Edges Self Faced On Other Side And Setin Cm 1:4 And Pointed In Cm 1:2 Including Taking Down / Dismantling Old Unserviceable Stone Slabs Complete All As Specified And Directed. 18 Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cm 1:3 To Ends Or Edges Of Landings, Steps Cills, Sunshades, Shelves, Lintels, Etc And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc And Making Good, Cutting Exceeding 20Cm Girth In Brick Work Complete All As Specified And Directed. 19 M&L 25 To 30 Mm Thick Dholpur Stone Cladding, Gang Saw Cut With Machine Cut Edges, Uniform Colour Of Each Stone Size Not Exceeding 0.25 Sqm Fixed With And Including, Making V Groove At Top And At Bottom Of Stone And Drilling Holes For Hold Fastener, Polishing, Rubbing & Including Silicon Treatment Complete All As Specified And Directed. 20 Refastening And Securing Ends Of Balusters, Newels, Rag Bolts Etc, Let Into Stone And Grouted In Cement Mortar Including Resecuring The Mortices And Regrouting In Cement Mortar Complete All As Specified And Directed. 21 Taking Down Chowkats Or Frames With Shutters ( Without Taking Off Shutters From The Frames ) Area Not Exceeding 1.5 Sqm Each And Making Good The Distrubed Surface Complete All As Specified And Directed. 22 Taking Down Chowkats Or Frames Exceeding 1.5 Sqm But Not Exceeding 4 Sqm Each With Shutters ( Without Taking Off Shutters From The Frames ) And Making Good The Distrubed Surface Complete All As Specified And Directed. 23 Taking Down Shutter Of Any Description Not Exceeding 1 Sqm Each Complete All As Specified And Directed. 24 Taking Down Shutter Of Any Description Exceeding 1 Sqm And Not Exceeding 2 Sqm Each Complete All As Specified And Directed. 25 Taking Down Shutters Of Any Description Exceeding 2 Sqm Each Complete All As Specified And Directed. 26 S&F Pressed Steel Frames Of Size 105X60mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc Complete All As Specified And Directed. 27 M&L For 35Mm Thick 2Nd Class Hard Wood Factory Made Plain Framed Panelled Shutter ( Any Number Of Panels ) , With Lock Rail And Panel Of 12Mm Thick Bwp Veneered Particle Board With Commercial Veneering On Both Faces.The Sizes Of Rails And Stiles As Per Is:1003 ( Part -I ) Kiln Seasoned And Chemically Pressure Treated Fitted To Chowkats Complete All As Specified And Directed. 28 M&L For 30 Mm Thick Flush Shutters, Solid Core Construction, With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides Complete All As Specified And Directed. 29 S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick ( Style ) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing Shown In Ssr Complete All As Specified And Directed. 30 S&F Factory Made Pvc Door Frames Of Size 50Mmx47 Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube Suitable For Opening As Per Site Condition Complete All As Specified And Directed. 31 S&F 100Mm Stainless Steel Butt Hinges, Medium Weight, Cold Rolledstainless Steel, And Fixed Complete All As Specified And Directed. 32 S&F 300 Mm Long Aluminium Alloy, Anodised Sliding Door Bolts, Plate Type, And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Or Extruded Sections Or Cast Aluminum Alloy Complete All As Specified And Directed. 33 S&F 250 Mm Long Aluminium Alloy, Anodised Sliding Door Bolts, Plate Type, And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Or Extruded Sections Or Cast Aluminium Alloy Complete All As Specified And Directed. 34 S&F In Repair 250 Mm Long Aluminum Alloy, Anodised Sliding Door Bolts, Plate Type, And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Or Extruded Sections Or Cast Aluminium Alloy Complete All As Specified And Directed. 35 S&F 200 Mm Long Aluminium Anodised Barrel Tower Bolts Of Extruded Section Complete All As Specified And Directed. 36 All As Per Item Ser No 35.00 Above But 150 Mm Size. 37 S&F In Repairs 200 Mm Long Aluminium Anodised Barrel Tower Bolts Of Extruded Section Complete All As Specified And Directed. 38 S&F 150Mm Long Aluminium Handles, Fabricated Type, D Shape, Anodized And Fixed Complete All As Specified And Directed. 39 S&F In Repairs150mm Long Aluminium Handles, Fabricated Type, D Shape, Anodized And Fixed Complete All As Specified And Directed. 40 S&F 140Mm Long Floor Door Stopper Aluminium Alloy Body And Tongue, Anodized With Hard Drawn Steel Spring Fixed In Floor Complete All As Specified And Directed. 41 S&F In Repairs140mm Long Floor Door Stopper Aluminium Alloy Body And Tongue, Anodized With Hard Drawn Steel Spring Fixed In Floor Complete All As Specified And Directed. 42 S&F In Repairs Door Closer Aluminium ( Die Cast ) Body Hydraulically Regulated, Designation No. 3 Universal Type, Suitable For Door Shutters Of 851 1000 Mm In Width And Of Weight 61 To 80 Kgscomplete All As Specified And Directed. 43 Hacking Out Old Broken Glass ( Any Thickness, Size, Quality Or Description ) From Metal Frame Including Punching Or Drilling Out Old Glazing Pins / Spring Clips Providing And Fixing New Ones Complete All As Specified And Directed. 44 S&F 3Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square Not Exceeding 0.5 Sqm In Each Pane Complete All As Specified And Directed. 45 S&F 4.8Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square Exceeding 0.5 Sqm In Each Pane Complete All As Specified And Directed. 46 S&F 4Mm Thick Figured Glass, Pin Headed Type And Glazing With Oil Putty In Square Not Exceeding 0.5 Sqm Each Pane Complete All As Specified And Directed. 47 S&F In Repairs Stainless Steel Wire Cloth, 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Wire Staples Complete All As Specified And Directed. 48 M&L For Preparation Of New Wooden Surface And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. 49 M&L For Preparation Of New Steel Or Iron Surface And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed. 50 Demolition Of Cement Concrete ( Unreinforced ) In Ground Floors And Pavings Not Exceeding 15 Cm Thickness ( Below Or Above Ground Level ) Complete All As Specified And Directed. 51 M&L 100Mm Thick Pcc 1:2:4 Type B-1 ( 20Mm Graded Stone Aggregate ) Including Necessary Form Work As In Path, Passages, Etc, Surface Finished Even & Fair & Spike Rolling To Surfaces Or Making Impressions Of Expanded Metal, While The Concrete Is Green Complete All As Specified And Directed. 52 M&L For 50Mm Thick Pcc 1:3:6 Type C2 ( Using 40Mm Graded Stone Aggregate ) As In Plinth / Path Protection 75Mm Thick Laid In Bays Including Finishing The Concrete Surface Even And Smooth Without Using Extra Cement Complete All As Specified And Directed.Note : The Units Rate Qouted Shall Be Deemed To Include For Providing The Concrete In Alternate Bays Exc 3 Mtr Long With 12Mm Wide And 50Mm Deep Joint Between The Bays Which Shall Be Filled With Mastic Filling With Hot Bitumen Vg-10 And 1:2 Mix By Volume. 53 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing ) Including Rubbish Off The Premises Complete All As Specified And Directed. 54 M&L For Ist Quality Non Skid Ceramic Colouredtiles 7Mm To 8Mm Thick, ( Square Or Rectangular ) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Shade Of Tiles Laid Over 15M Thick Screed Bed In Cm 1:6 Complete All As Specified And Directed. 55 M&L For Ist Quality Glazed Ceramic Coloured Tiles Of Size 300X200 6 To 7 Mm Thick On Vertical Surfaces Such As Skirting, Dados And Risers To Steps Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Shade Of Tiles Laid Over 10Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 56 M&L Coloured Chequeredcement Concrete Tiles 25Cm X 25Cm X 22Mm Thick, Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigment In Floors Laid Over 15Mm Thick Screed Bed In Cm 1:6 Complete All As Specified And Directed. 57 Demolition Of Brick Or Concretetile ( Laid Flat Or On Edge ) Laid In Floor, Channel, Kerb, Apron Etc Laid Dry Complete All As Specified And Directed. 58 M&L For Machine Pressed Precast Concrete Interlocking Paver Block 60Mm Thick, M-35 Grade With Grey Cement And No Pigment Any Shape And Size Confirming To Is 15658-2006 Laid In Floors Over And Including 25Mm Thick River Sand Complete All As Specified And Directed. 59 Blank 60 M&L For Premium Quality Fully Vitrified Tiles Light Shade 10 Mm Thick ( Square Or Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Matchthe Shade Of Tiles Laid Over 15Mm Thick Screed Bed In Cm 1:6 Complete All As Specified And Directed. 61 Demolition Of Stone Slabs And Tiles Laid, Bedded And Pointed In Any Mortar Of Any Description Or Thickness In Floors, Aprons Etc Complete All As Specified And Directed. 62 M&L For 20Mm Thick Granite ( Of Any Type ) Work ( Table Rubbed And Polished ) In Steps, Jambs, Pillars, Window Cills, Cooking Platforms And Like Including Pointing In White Cement 1:2 Using Marble Dust With Admixture Of Pigment To Match With Shade Laid Over 20Mm Thick Screed Bed In Cm 1:4 Complete All As Specified And Directed. 63 M&L For Kota Stone Slab Flooring 20-25Mm Thick Laid And Jointed Withgrey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Laid Over 20Mm Thick Screed Bed In Cm 1:6Complete All As Specified And Directed. 64 M&L For Kota Stone Slab 15 To 18 Mm Thick In Riser Of Steps, Skirting, Dado And Pillar Etc And Jointed Withgrey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Laid Over 15Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 65 Dismantling Of Existing Roof Treatment Any Descriptionincluding Lime / Cement Concrete On Roof Slab And Clean The Surface As Well Complete Including Removal Of Debris Away From The Site Complete All As Specified And Directed. 66 M&L 40Mm Thick Brick Tiles Laid Over 15Mm Thick Screed Bed In Cm 1:6 And Joints Grouted Flush In Cm 1:3 Mixed With 5% Of Crude Oil By Weight Of Cement Complete All As Specified And Directed. 67 M&L For Screed Bed 10Mm Thick In Cm 1:4 Mixed With Water Profing Compound @ 3% By Weight Of Cement Or As Per ManufacturerS Instruction Complete All As Specified And Directed.Note : Wpc Shall Be Measured And Paid Seperately. 68 M&L For Roof Treatment With Polymeric Membrane ( App Based ) With Non Woven Polyester Mat As Reinforcement With Following As Given Here Under Over The Prepared Roof Surface By Applying A Coat Of Cold Bitumen 85 / 25 Based Primer On Entire Surface @ 0.30 Ltr / Sqm On Dry And Clean Surface And A Coat Of Blown Bitumen 85 / 25 Grade @ 1.2 Kg / Sqm And Applying Further Treatment As Under:- ( I ) M&L For A Layer Of App Based Polymeric Membrane Minimum Weighing Not Less Than 3Kg / Sqm And Minium 3Mm Thick Reinforced With Polyster Non Woven Fabric ( Wt. Not Less Than 150 Gms ) And On Primed Surface By Forced Application Complete All As Specified. ( Ii ) M&L For Applying Evenly A Tack Coat Of Industrial Bitumen 85 / 25 At The Rate Of 1.2 Kg Per Sqm Including Cleaning Surfaces.Note:- Ponding Test With Filling Of Water For Continuous 48 Hours Complete All As Specified And Directed. 69 M&L For Pcc 1:2:4 Type B-0 ( Using 12.5Mm Graded Stone Aggregate ) As In Coping, Coving, Padding, Bed Plates Or Mass Etc. Complete All As Specified And Directed. 70 Taking Up Or Down Steel Tubing And Connections 15Mm Bore Complete All As Specified And Directed. 71 All As Per Item Ser No. 70.00 Above But 20Mm Dia. 72 All As Per Item Ser No. 70.00 Above But 25Mm Dia. 73 S&F Gi Tube Medium Grade Galvanised 15 Mm Bore With All New Fittings Fixed To Wall And Ceilings Or Laid In Floor Complete All As Specified And Directed. 74 S&F Gi Tube Medium Grade Galvanised 20 Mm Bore With All New Fittings Fixed To Wall And Ceilings Or Laid In Floor Complete All As Specified And Directed. 75 S&F Gi Tube Medium Grade Galvanised 25 Mm Bore With All Fittings Fixed To Wall And Ceilings Or Laid In Floor Complete All As Specified And Directed. 76 S&F 20Mm Ball Brass Valves High Pressure With Polythene Float And Fly Nut Complete Screwed For Iron Pipe Or Brass Ferrule And Fixed Complete All As Specified And Directed. 77 S&F In Repair 15Mm Bib Taps Cast Copper Alloy Chromium Plated Fancy Type With Crutch Or Butterfly Handle Screwed Down Screwed For Iron Pipe Or For Brass Ferrule And Fixed Complete All As Specified And Directed. 78 S&F In Repair 15Mm Stop Valves Cast Copper Alloy Chromium Plated Fancy Type Long Shank Concealed Type Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both Ends For Iron Pipe Or For Unions And Fixed Complete All As Specified And Directed. 79 S&F In Repair 15Mm Bib Taps Standard Of Ptmt Any Colour High Pressure Screwed For Iron Pipe And Fixed ( Minium Weight 15Mm - 90Gms ) Complete All As Specified And Directed. 80 S&F In Repair 15Mm Stop Valve Of Ptmt Any Colour High Pressure Screwed For Iron Pipe And Fixed ( Minium Weight 15Mm - 90Gms ) Complete All As Specified And Directed. 81 S&F In Repairs Vitreous China Squatting Pan, Orissa Pattern , Size 580X440 Mm White, With Integral Foot Rests ( Excluding Flushing Cistern And Flush Pipe ) But Including 110Mm Pvc ( Swr ) Wc Connector With Lip Ring Andpvc ( Swr ) P / S Trap 110Mm Complete All As Specified And Directed. 82 S&F In Repairs Vitreous China Wash Down Water Closet Pan ( Pedastal Pattern ) , White ( Excluding Fixing Bolt Etc Complete All As Specified And Directed. 83 S&F Plastic Water Closet Seat, Black, Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinge Device Complete All As Specified And Directed. 84 S&F In Repairs Low Level Flushing Cistern Of Capacity 10 Litre Isi Marked Complete With Inlet Ball Valve And Handle Including Bracket Complete All As Specified And Directed. 85 S&F In Repairs Vitreous China Wash Hand Basin, White Flat Back, Size 630X450mm Excluding Tap Etc But Including Brackets Complete All As Specified And Directed. 86 S&F In Repairs Vitreous China Urinal Half Stall Type, White As Per Exisiting Size Complete All As Specified And Directed. 87 S&F In Repair 40 Mm Bore Low Density Polyethylene Pipe Of Pressure Rating 6Kgf / Sqcm Complete All As Specified And Directed. 88 S&F In Repair 32 Mm Bore Low Density Polyethylene Pipe With Waste Coupling For Wash Hand Basin Complete Allas Specified And Directed. 89 S&F In Repair 15Mm Dia Pillar Tap Cast Copper Alloy With Capstan Heads Chromium Plated Screwed Down High Pressure With Or Without Lettered Hot And Cold With Long Screwed Shanks And Fly Nuts Screwed For Iron Pipecomplete All As Specified And Directed. 90 S&F In Repair 15Mm Dia Pillar Tap Of Ptmt Any Colour High Pressure Screwed For Iron Pipe And Fixed Minimum Weight - 120 Gms ) Complete All As Specified And Directed. 91 S&F In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe 25Mm Bore ( Weight 455 Gms ) Complete All As Specified And Directed. 92 S&F In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe 20Mm Bore ( Weight 210 Gms ) Complete All As Specified And Directed. 93 S&F 600Mm X 450 Mm Bevelled Edge Mirror Of Selected Quality Gless, Moulmted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washer Complete All As Specified And Directed. 94 S&F In Repair Chromium Plated Shower Roses With Or Without Swivel Joints 125Mm Size, Including Fixing To Steel Pipe Or Union Complete All As Specified And Directed. 95 S&F Grating Square 150Mm Size Of Ptmt ( Minimum Weight 100 Gms ) Complete All As Specified And Directed. 96 S&F Grating Doom 150 Mm Dia With Waste Hole Of Ptmt. ( Minimum Weight 100 Gms ) Complete All As Specified And Directed. 97 S&F In Repairs Pvc Connection 15Mm Size With Ptmt Nuts Of Length 450Mm Complete All As Specified And Directed. 98 S&F 32Mm Waste Coupling Of Ptmt ( Half Or Full Threaded ) Minimum Weight 45Gms For Urinals Complete All As Specified And Directed. 99 S&F In Repair Bottle Trap 32 Mm Bore Of Ptmt Having Minium Water Seal 25 Mm Weight 260 Gms For Wash Basin With Inlet And Outlet Screwed For Pipe Or Connections Including Necessary Packing, Union And Cap Complete All As Specified And Directed. 100 S&F In Repairs Pvc 75Mm ( Swr ) Floor Trap, Plane With Grating Including Jointing With Solvant Cement Complete All As Specified And Directed. 101 Taking Down Eaves Gutters And Rainwater Pipes ( Any Size Or Pattern ) , Including All Fittings, Heads, Shoes, Bends, Swan-Necks, Etc Complete All As Specified And Directed. 102 S&F For 110Mm Bore Pvc ( Swr ) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Wall Complete All As Specified And Directed. 103 All As Per Ser Item No. 102.00 Above But 75Mm Bore. 104 S&F 75Mm Dia Pvc ( Swr ) Bends Any Radius Complete All As Specified And Directed. 105 S&F 110Mm Dia Pvc ( Swr ) Bends Any Radius Complete All As Specified And Directed. 106 S&F 110Mm Dia Pvc ( Swr ) Junction Single ( Single T ) Equal Or Unequal Complete All As Specified And Directed. 107 S&F 75Mm Dia Pvc ( Swr ) Vent Cowl Complete All As Specified And Directed. 108 Demolition Of Brick Work Or Stone Masonry Built In Cement Mortar Including All Quoins Arches, Pillars Etc Complete All As Specified And Directed. 109 M&L For Brick Work With Sub Class B Old Size Bricks Straight Or Corved On Plan Exceeding 6 M Mean Radius Built In Cm 1:4 Complete All As Specified And Directed. 110 Dismantling Of Water Tanks And Removing To Store Exceeding 250 Litres But Not Exceeding 500 Litres Complete All As Specified And Directed. 111 Dismantling Of Water Tanks And Removing To Store Exceeding 500 Litres But Not Exceeding 1000 Litres Complete All As Specified And Directed. 112 M&L For Rotational Moulded Polyethylene Water Storage Tank Triple Layered 500 Litres Capacity ( Cylindrical Vertical With Closed Top ) Hoisted In Position Complete All As Specified And Directed. 113 M&L For Rotational Moulded Polyethylene Water Storage Tank Triple Layered 1000 Litres Capacity ( Cylindrical Vertical With Closed Top ) Hoisted In Position Complete All As Specified And Directed. 114 S&F In Repairs Health Faucet Brass Chromium Plated With 900Mm Long Pvc Connection Pipe 15 Mm Dia With Brass Sockets Complete All As Specified And Directed. 115 S&F In Repairs Brass Jet Spray Chromium Plated With 900Mm Long Pvc Connection Pipe 15 Mm Dia With Brass Sockets For Europian Water Closet Complete All As Specified And Directed. 116 S&F In Repairs Pvc Connection 15Mm Size With Ptmt Nuts Of Length 900Mm Complete All As Specified And Directed. 117 S&F Anodised Aluminium Frame Size 101.5X45x2mm Thick For Doors, Windows, Ventilator With One Or More Rebates Including Jointing Cleat For Fixing Etc Complete All As Specified And Directed. 118 S&F Anodised Aluminium Door Shutters, Aluminium Section Weighing 0.55 Kg / M Including Necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Handles 2 Nos In Each Door Shutter, Aluminiumhinges, Anodised Aluminiumsnap Beading, Screws Etc Complete All As Specified And Directed.Note : Bottom & Lock Rail Shall Be Of Aluminium Section 45Mmx114x 1.41Mm Thick. 119 S&F Anodised Aluminium Window And Ventilator Shutter, Fixed Type Without Sash Bar, Aluminium Section Weighing 0.55Kg / M Including Necessary Jointing Cleat, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws Etc Complete All As Specified And Directed. 120 S&F Anodised Aluminium Window And Ventilator Shutter, Side Hungtype Without Sash Bar, Aluminium Section Weighing 0.55Kg / M Including Necessary Jointing Cleat, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws, Aluminium Anodised Fittings Such As Peg Stays 150Mm Long ( 01 No ) , Hinge Type B-21 100Mm Long ( 02 Nos ) Suitable Handles ( 01 No ) Complete All As Specified And Directed. 121 S&F In Repair Anodised Aluminium Grill ( Anodised Transparent Or Dyed To Required Shade According To Is : 1886 With Minium Anodic Coating Of Grade Ac 15 ) Of Approved Design / Pattern, With Approved Standard Section And Fixed To The Existing Windows Frame With Cp Brass / Stainless Steel Screw @200 Mmm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Openingall Complete As Per Requirement And Direction Complete All As Specified And Directed. 122 S&F In Repair Double Action Floor Door Spring Hydraulically Regulated Made Up Of Minimum 1.25Mm Thick Aluminium Alloy Sheet Foundation Box, Main Body With Stainless Steel Cover, Governing Pivot Made Out Of Brass, Other Part Made Of Mild Steel Heavy Duty And Fixed Complete All As Specified And Directed. 123 Repairs To Rolling Shutter Of Any Size And Description With Or Without Gear Box Including Taking Down If Required, Easing Of Shutter, Greasing / Oiling To Ball Bearing, Springs And Guide Channels, Gear Box Etc, Straightening Of Guide Channels, Choring Rod And , Hasp And Stapples, Welding Where Ever Necessary And Refixing In Its Original Position After Repairs Etc Complete All As Specified And Directed. 124 S&F In Repairs Ball Bearing Of Rolling Shutter Gear Or Without Gear Operated Complete All As Specified And Directed. 125 S&F In Repairs Spring For Rolling Shutter Best Qualitycomplete All As Specified And Directed. 126 S&F In Repairs Outer Garari For Rolling Shutter Shaftcomplete All As Specified And Directed. 127 S&F In Repairs Gear Shaftgarari For Rolling Shutter Complete All As Specified And Directed. 128 S&F In Repairs Ms Strip Made Out Of 1.25Mm Thick Sheet In Rolling Shutter Including Locking The Same And Match With Existing Strips Etc Complete All As Specified And Directed. 129 S&F In Replacement Of Existing Gear Box Forrolling Shutterwidth Upto 4M, Best Qualitycomplete All As Specified And Directed. 130 S&F In Replacement Of Existing Gear Box Forrolling Shutterwidth Above 4 To 6M, Best Qualitycomplete All As Specified And Directed. 131 M&L For Preparation Of Old Plastered Surface Of Walls And Applying One Coat Of Exterior Emulsion Paint Complete All As Specified And Directed. 132 M&L For Applying Two Coats Of Oil Bound Distemper Over A Coat Of Alkali Resistant Primer On Ceilng Surface Including Preparation Of New Plastered Surface Complete All As Specified And Directed. 133 M&L Complete Removal Of Existing Treatment Of Ceiling Including Cornices Etc And Making Good Of Filling Holes And Applying Two Coat Of Oil Bound Distemperover A Coat Of Primer Complete All As Specified And Directed. 134 M&Lcomplete Removal Of Existing Treatment Of Walls Including Cornices Etc And Making Good Of Filling Holes And And Two Coats Of Wall Care Putty ( 1Mm Each Coat ) And Finishing Wall With Textured Exterior Paint Of Required Shade New Work ( Two Or More Coats Applied @1.67Ltr / 10 Sqm Over And Including Priming Coat Off Exterior Primer Applied @ 2.20 Kg / 10 Sqm Complete All As Specified And Directed. 135 M&Lfor Preparation Of Old Plastered Surfacesof Ceiling And Applying One Coat Of White Wash Complete All As Specified And Directed. 136 M&L For Applying One Coat Of Oil Bound Distemper On Walls Including Preparation Of Old Plastered Surface Complete All As Specified And Directed. 137 M&L For Preparation Of Old Plastered Surface Of Walls And Applying Two Of Oil Bound Distemper Complete All As Specified And Directed. 138 M&L For French Polishing With One Or More Coat On Old Wooden Surfaces Of Any Description, Width Or Girth Including Cleaning And Preparing The The Surfacescomplete All As Specified And Directed. 139 M&L Forpreparation Of Old Steel Surfaces Of Any Description, Over 10Cm In Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. 140 S&F In Repair Rubber Beading For Fixing Glass Pane In Aluminium Door / Windows Where Applicable In Squareexceeding 0.5 Sqm In Each Pane Complete All As Specified And Directed. 141 S&F In Repairs Sun Light Relective / Solar Film To Glass Pane Of Any Approved Colour Complete All As Specified And Directed. 142 S&F In Repairs Mortice Lock Brass, 4 Lever Of Size 100 Vertical Type Fixed To Aluminium Doors Including Duplicate Keys Etc Complete All As Specified And Directed. 143 S&F In Repair 15Mm Stop Valves 3 Way Cast Copper Alloy Chromium Plated Fancy Type Long Shank Concealed Type Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both Ends For Iron Pipe Or For Unions Complete All As Specified And Directed. 144 S&F In Repairs Toilet Paper Holder Brass Chromium Platedcomplete All As Specified And Directed. 145 M&L For Point Contact Of Wood Work By Chemical Emulsion ( In Oil Or Kerosene Based Solution ) @ 0.5 Ltr / Holes By Drilling 6Mm Dia Holes At Downward Angle Of 45 Degree At 150Mm Centre To Centre And Sealing The Same Complete All As Specified And Directed.

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 04-03-2023 Corrigendum01 Date 20-03-2023
2 08-04-2023 Corrigendum04 Date 18-04-2023
3 10-04-2023 Corrigendum05 BOQ 18-04-2023
4 13-03-2023 Corrigendum02 Date 03-04-2023
5 18-04-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 25-04-2023
6 28-03-2023 Corrigendum 03 Date 15-04-2023

Key Value

Document Fees
INR 500 /-
EMD
INR 61000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail