Tender For Construction Of Tarundeep Rai Archery Academy, Kitchu Dumra, South Sikkim.
Tender Value
21.98 Crore
Estimated cost
Bid Submission
22 Mar 2023
0 days left
EMD
54.95 Lakhs
Bank guarantee accepted
Document Fee
2 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dumra → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Tarundeep Rai Archery Academy, Kitchu Dumra, South Sikkim.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 3 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 4 | Excavation in soil in hilly area by manualmeans including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres. |
| 5 | Excavation in soil in hilly area by manualmeans including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres.all kind of soil |
| 6 | ordinary rock |
| 7 | Filling inside plinth in building works with 23cm layers, consolidated to 15cm including watering, ramming etc, all complete. |
| 8 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 9 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means) |
| 10 | Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete. |
| 11 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size) |
| 12 | Providing and Laying40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 of 12.5mm and down stone aggregate) flooring withfloating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc complete in all building floors wherever specified. |
| 13 | Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge. |
| 14 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.(1:2:4 mix)20mm down |
| 15 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 16 | Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 17 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) |
| 18 | Foundation, footings, base of column etc for mass concrete. |
| 19 | columns |
| 20 | Beam |
| 21 | slab |
| 22 | wall |
| 23 | Providing and laying. coarse Rubble Stone Masonry with hammer dressed clean hard selected stone in 1:3:6c.c. (1 cement, 3 sand, 8 clean hard graded stone ships of size 40mm) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down)and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 24 | Providing and laying. coarse Rubble Stone Masonry in 1:4:8 c.c. ( 1 cement, 4 sand, 8 clean hard graded stone chips of size 40mm and down) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down), and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 25 | Providing and laying. coarse Rubble Stone Masonry in 1:4:8 c.c. ( 1 cement, 4 sand, 8 clean hard graded stone chips of size 40mm and down) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down), and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 26 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge. |
| 27 | Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar ( 1cement, 5coarse sand) including centering, liningand curing etc as per the direction of Engineer in Charge, all complete. |
| 28 | Compacting Original Ground [Compacting original ground supporting subgrade (Loosening of the ground upto a level of500 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of table 300-2 for subgrade construction.)] Case-I |
| 29 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 |
| 30 | Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)By Manual Means:Grading- I Using Screening Crushable type such as Moorum or Gravel |
| 31 | Grading- II Using Screening Crushable type such as Moorum or Gravel |
| 32 | Grading- III Using Screening Crushable type such as Moorum or Gravel |
| 33 | Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate shown in 500-1 using mechanical means.) |
| 34 | Medium Porosity |
| 35 | Tack coat (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at required rate on the prepared bituminous/granular surface cleaned with mechanical broom.) |
| 36 | Normal Bituminous SurfaceBituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction) |
| 37 | (ii) for Grading-II (19 mm nominal size)Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects) |
| 38 | for Grading-I(13 mm nominal size)Furnishing and laying of the perennial turf forming grass (ghorey dubo) on embankment slope, verges or other locations shown on the drawing or as directed by the engineer including preparation of ground, fetching of sods and watering. |
| 39 | Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete. |
| 40 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately) |
| 41 | Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete.1:4 mix. |
| 42 | Providing and laying plaster of paris putty of 2mm thick over lastered surface to prepare the surface even and smooth all complete: |
| 43 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 44 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blueor equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 45 | Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 46 | Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishingand including cost of one coat priming on the base frame complete.With locally available timber |
| 47 | Providing and Laying. 40 mm thick Red oxide flooring with under layer 30mm thick c.c. 1:2:4 and top layer of 10mm thick plaster of red oxide and cement mix cement mortar 1:3 finished with a floating coat of neat similar cement red oxide mix including cement slurry, rounding of junction all complete: |
| 48 | Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 49 | Providing, fitting and fixing of dressed sal timberin all types of frames complete, with locally available timber. |
| 50 | Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete.With locally available timber |
| 51 | Providing, fitting and fixing 25 mm thick false ceiling/ paneling of dhupi or local timber intimber frames of timber equivalent to Katus or pakhs saaj or equivalent excluding the cost of polishing and including cost of one coat priming onunexposed frame, With locally available timber. |
| 52 | Providing, fitting and fixing 25mmx50mm dressed ceiling, beads intimber equivalent to rani champ or panisaz or same quality oftimber used in ceiling work all complete, With locally available timber |
| 53 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete, 32mmthick panel door. |
| 54 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete, 32mmthick panel door. |
| 55 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm andsingle glass pane glazing beadof appropriate dimension. (Area of window upto 0.75 sqm.) |
| 56 | Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 57 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) |
| 58 | Providing and fixing tower bolts 300x10mm (Barrel type) with necessary screws etc complete.(M.S) |
| 59 | Providing, fitting and fixing handles 125mm size with necessary screws etc complete. (M.S) |
| 60 | Providing and fixing 100mm mortise lock with 6 levers and pair of handles with necessary screws etc complete.(M.S) |
| 61 | Providing and fixing M.S. or oxidized M.S. Hook and Eyes with complete set. 150mm |
| 62 | Providing and fixing M.S. pressed bright finished butt hinges with necessary screws etc. complete. |
| 63 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prime all complete. |
| 64 | Providing, fitting, fixing of 24 BWG GCI sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy (8 to 10 gm per bolt) in each bolts including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete. |
| 65 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Galvanized Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers complete. |
| 66 | Providing, fitting and fixing 200mm x 25mm eaves board in dressed sal timber with 50mmx25mm beads in the same timber. |
| 67 | Providing, fitting, fixing of 24 BWG pre-painted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete. RAL 8011 shade |
| 68 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 69 | Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Chargeall complete. |
| 70 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete. |
| 71 | Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanized Iron steel works including preparation of the surface complete. |
| 72 | Providing and French spirit polishing one or more coats including cleaning of the surface of dirt and dust papered smooth etc on old surface complete. |
| 73 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 74 | Providing and washing with three or more coats of snowcem, durocem, cemcote etc. of approved quality and manufacture on exterior walls to give an even shade including preparation of surface on New surface complete. |
| 75 | G.I Barbed wire Fencing 1.2 metre high(Providing and fixing 1.2 metres high GI barbed wire fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 807 ) |
| 76 | Supply & knitting of G.I. wire (gauge 08 B.W.G.) in multiple knots @ 2.5 kg per sqm (weight of net per sqiuare metre area) including launching launching of wire new including overlap and wastages for construction of sausage wall as per direction of engineer in charge all complete |
| 77 | Providing U shaped drain of 23cm (ht) x 23 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm on both sidewith 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including 1:3 cement plasterwith neat cement polishing & rounding of junction,as per the direction ofthe Engineer in Charge. |
| 78 | Providing and laying standard \"V\" shaped drain with cement concrete base in 1:2:4 (1 cement, 2 clean coarse sand, 4 stone chips 20mm and down) mixof 100mm thick over clean hard selected stones soling of 150mm thick and 1:2:4 (1 cement, 2 clean coarse sand, 4 stone chips 40mm and down) mix plum concrete along the vertical side of thickness 150mm and depth 450mm including curing, compacting, as per the direction ofthe Engineer- in - Charge. |
| 79 | Tubular Steel Railing on Medium Weight steel channel ( ISMC series) 100 mm x 50 mm (Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings) |
| 80 | Purchaseof Host and Nectar - Flowering and Fruit bearing Plant including transportation |
| 81 | Purchaseof Farm Yard Manures (FYM) and Forest Manures including transportation |
| 82 | Purchaseof tools and equipments used for plantation |
| 83 | Provision of Labours for plantation |
| 84 | Providing, fitting and fixing soil waste and vent pipes including testing etc complete. |
| 85 | 100 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 86 | 75 mm dia. PRINCE / SUPREME soil Pipe |
| 87 | Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. |
| 88 | 100 mm dia. Supreme / Prince |
| 89 | 75 mm dia. Supreme / Prince |
| 90 | Providing, Fitting and fixing GI pipe of medium class,(excluding trenching, refilling, compactingandthe cost of fittings) all complete |
| 91 | a 15 mm dia G I pipe |
| 92 | b 25mm dia G I pipe |
| 93 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) |
| 94 | a BIB COCK15 MM DIA |
| 95 | b STOP COCK15 MM DIA (CONCEALED WORKS) |
| 96 | c Angular stop cock |
| 97 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 98 | Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 99 | porcelain soap dish |
| 100 | Basin Mixture |
| 101 | Sanitary Faucet |
| 102 | P/F/F of floor trap |
| 103 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. 740 x 20 mm |
| 104 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent) 2000 LITERS CAPACITY |
| 105 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan W.C. pan European Bidets constellation CAT NO 30006 |
| 106 | Providing, fitting and fixing Special needs toilet good quality according to the engineer in charge all complete. |
| 107 | Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltrautomatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete: |
| 108 | a) Range of 1 Urinal basin.Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions,complete including cutting and making good the walls wherever required. HINDWARE(63 cm x 45 cm) |
| 109 | Providing fitting and fixing manholes on septic tank |
| 110 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compactingandthe cost of fittings) all complete. |
| 111 | cost of GI Fittings |
| 112 | storage charge |
| 113 | CARRIAGE NON- STOCK MATERIALS (km = 30) |
| 114 | Stone |
| 115 | Stone aggregates |
| 116 | sand |
| 117 | Bitumen |
| 118 | STOCK MATERIAL (km = 30) |
| 119 | cement and steel |
| 120 | carriage of excavated earth |
| 121 | Carriage of drain board & turfing grass |
| 122 | Carriage and Head Load |
| 123 | Loading and Unloading of Boulders by Manual Means . Stone,Sand and Stone chips |
| 124 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 125 | Other Works (Furnitures, miscellanesous Protective works etc.) |
| 126 | Internal and External Electrfications( inclusive of all taxes). |
AI Tender Summary
Tender Timeline
Feb 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 22, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender