E-Rate Quotation Of Non Dsr Items For Preparation Of Estimate For The Works In The Jurisdiction Of Executive Engineer, P.W. Division Nashik, nashik-Maharashtra

E-Rate Quotation of Non DSR Items for Preparation of Estimate for the Works in the Jurisdiction of Executive Engineer, P.W. Division Nashik , Victoria Bench : Technical Specification :- •Frp C Channel Wood Finish ( Iso ) Patti: C - Section Frp Channel Strip Of Thickness Up To 5 Mm Approx. And Overall Size Should Be 30Mm X 80Mm X 1200 Mm Long Approx. Minimum 8 Nos Wooden Finish Bolted To Both The Side Frames. The Seating Portion And Backrest Is Made Up Of Frp. At The End Of The Strips Nylon End Caps Are Given To Prevent Dust Particles From Entering In It. •Frp Product: All The Fiber Reinforced Plastics ( Frp ) Materials Are Processed By The Hand Laid Process Which Is Considered To Be The Best Of Its Type. We Use International Quality Of Gel Coats Which Is Duly Mixed With U.V Stabilized Pigment To Give The Required Color To The Product. Thickness Of The Frp Material Varies From 4 Mm To 5 Mm Approx. As Per The Product. •Bench Frame: I-Section Bench Frame With Bend Welded On One Side For Bolting The Frp C-Channel Strip. The Bench Frame Size Shall Be 30Mm Approx. Made Up Of Cast Iron In Sand Casting Process. •Powder Coating / Painting: It Shall Be Done With Pure Polyester Raw Material. Dry Film Thickness Maintained Within The Range Of 50-70 Microns. Duly Powder Coated Or Painted In Duco Black Colour Paint. •Nut And Bolts:Galvanized / S.S. Button Head Screw Size M8 X 60 Grade S.S. 304. Normal Seat Height Of Bench Shall Be 18’’ Approx. From Ground Level. The Overall Size Of Bench L 1300 Mm X D 560 Mm X Ht 820 Mm Approx. The Overall Weight Of Bench Shall Be 52 Kg Approx. Normal Seat Height Of Bench Shall Be 18’’ Approx From Ground Level. The Legs Pipes With Hole Pass Fix In Anchor Fastener Bolt On Concrete Hard Surface Area Or Embedded In C.C. Blocks ( M20 Mix ) Of Size 0.45 X 0.45 X 0.45. Descriptions : • Product Area : 1.2M X 0.6M ( 4Ft X 2Ft ) Approx Vintage Bench : Technical Specification :- •Frp C Channel Wood Finish ( Iso ) Patti: C - Section Frp Channel Strip Of Thickness Up To 5 Mm Approx And Overall Size Shall Be 80 Mm X 30 Mm X 1370 Mm Long Approx. Minimum 8 Nos. With Wooden Finish Bolted To Both The Side Frames. The Seating Portion And Backrest Is Made Up Of Frp. At The End Of The Stripes Nylon End Black Color Caps Are Given To Prevent Dust Particles From Entering In It. •Frp Product: All The Fiber Reinforced Plastics ( Frp ) Materials Are Processed By The Hand Laid Process Which Is Considered To Be The Best Of Its Type. We Use International Quality Of Gel Coats Which Is Duly Mixed With U.V Stabilized Pigment To Give The Required Colour To The Product. Thickness Of The Frp Material Varies From 4 Mm To 5Mm Approx. As Per The Product. The Frp Material Is Tested For Abrasion Resistance. •Bench Frame: The Frames Are Made Up Of Cast Iron In Sand Casting Process With Minimum Thickness Upto 25Mm Approx With Arms ( Handle Rest Thickness 22Mm Approx. ) Support With Design. In The Middle It Has M.S. Strip Support That Shall Be 25Mm X 5Mm X 840Mm Long Fix With Bolt Black Color Strip Which Assembled At Middle. •Powder Coating / Painting: It Shall Be Done With Pure Polyester Raw Material. Dry Film Thickness Maintained Within The Range Of 50-70 Microns. Duly Powder Coated Or Painted In Duco Black Colour Paint. •Nut And Bolts: Galvanized / S.S. Button Head Screw Size M8 X 60 Grade S.S. 304. Normal Seat Height Of Bench Shall Be 18’’ Approx. From Ground Level. The Overall Size Of Bench L 1450Mm X D 600Mm X Ht 830Mm. The Overall Weight Of Bench Shall Be 55 Kg Approx. The Legs With Hole Pass Fix In Anchor Fastener Bolt On Concrete Hard Surface Area Or Embedded In C.C. Blocks ( M20 Mix ) Of Size 0.45 X 0.45 X 0.45. Descriptions : • Product Area : 1.3M X 0.6M ( 4.5Ft X 2Ft ) Approx. , Vintage Bench : Technical Specification :- •Frp C Channel Wood Finish ( Iso ) Patti: C - Section Frp Channel Strip Of Thickness Up To 5 Mm Approx And Overall Size Shall Be 80 Mm X 30 Mm X 1370 Mm Long Approx. Minimum 8 Nos. With Wooden Finish Bolted To Both The Side Frames. The Seating Portion And Backrest Is Made Up Of Frp. At The End Of The Stripes Nylon End Black Color Caps Are Given To Prevent Dust Particles From Entering In It. •Frp Product: All The Fiber Reinforced Plastics ( Frp ) Materials Are Processed By The Hand Laid Process Which Is Considered To Be The Best Of Its Type. We Use International Quality Of Gel Coats Which Is Duly Mixed With U.V Stabilized Pigment To Give The Required Colour To The Product. Thickness Of The Frp Material Varies From 4 Mm To 5Mm Approx. As Per The Product. The Frp Material Is Tested For Abrasion Resistance. •Bench Frame: The Frames Are Made Up Of Cast Iron In Sand Casting Process With Minimum Thickness Upto 25Mm Approx With Arms ( Handle Rest Thickness 22Mm Approx. ) Support With Design. In The Middle It Has M.S. Strip Support That Shall Be 25Mm X 5Mm X 840Mm Long Fix With Bolt Black Color Strip Which Assembled At Middle. •Powder Coating / Painting: It Shall Be Done With Pure Polyester Raw Material. Dry Film Thickness Maintained Within The Range Of 50-70 Microns. Duly Powder Coated Or Painted In Duco Black Colour Paint. •Nut And Bolts: Galvanized / S.S. Button Head Screw Size M8 X 60 Grade S.S. 304. Normal Seat Height Of Bench Shall Be 18’’ Approx. From Ground Level. The Overall Size Of Bench L 1450Mm X D 600Mm X Ht 830Mm. The Overall Weight Of Bench Shall Be 55 Kg Approx. The Legs With Hole Pass Fix In Anchor Fastener Bolt On Concrete Hard Surface Area Or Embedded In C.C. Blocks ( M20 Mix ) Of Size 0.45 X 0.45 X 0.45. Descriptions : • Product Area : 1.3M X 0.6M ( 4.5Ft X 2Ft ) Approx. , Deluxebench: Technical Specification Providing & Fixing Deluxe Benches Made From G.I. Perforated Sheet And Gi Pipes Of Isi Mark ‘B’ Class Heavy Duty Quality Of Approved Make I.E. Siddharth, Surya, Zenith, Swastik, Appolo Or Equivalent. The Main Frame Shall Be Have 25Mm Nb Pipe Gi Pipe With Support 15 Nb Gi Pipe For Top & Bottom.Main Frame Supports Leg Pipe Shall Be Of 15 Nb Gi Pipe. The Seat Is Made Upto 1.2 Mm Thick Gi Perforated Sheet With Hole Size 5Mm & Pitch 18Mm Approx. It Shall Be Properly Bended, Fitted I.E. Weldedor Rebatedproperlyonmainframepipe Withthe Supportof M.S. Angles Of 25X25x5mmthick5 Nos. This Will Give Proper Support & Shape Maximum Comfort To The Body. The Capacity Of Bench Shall Be Minimum 3 Adults. The Overall Weight Of Bench Shall Be 35 Kg Approx. The Height Of Bench Is 1.0 Mtr From G.L And Area Is 1.2M X Q.6M. The Legs Pipes Are Embedded In C.C. Blocks ( M20 Mix ) Of Size 0.45 X 0.45 X 0.45 And Painting Is Done By Attractive Color Spraying After Proper Surface Treatment And Initial Coat Of Yellow Primer Surface Is Applied Before The Top Coat. The Top Coat Is Done Using The Brand Paint Or Duly Pure Polyester. Powder Coated In Attractive Color As Directed By Engineer In-Charge. Descriptions : • Product Area : 1.25 M – L X 0.7M – W X 1.25 -H. Approx. , Stadium Bench : Technical Specification: •Frp Back Rest - Frp Backrest Made Up Of Fiberglass Reinforced Plastic Of Thickness 4Mm-5Mm To Provide Enough Strength For The People Sitting On It. •Frp Seat:- Frp Seat Made Up Of Fiberglass Reinforced Plastic Of Thickness 5Mm - 6Mm And Provided With A Smooth Surface On Top So As To Avoid Damage To The Clothes Of The Person Sitting On It. Seat Height From Ground Level After Installation Shall Be 18’’ Approx •Plate: Hot Dipped Galvanized Flat Plates Of Size 385X50x10mm Welded To The Pipes So As To Provide A Proper Flat Surface For Its Erection Purpose Holes Are Drilled On The Plates Of Dia 11Mm For Insertion Of Anchor Bolts. •Frp Product: All The Fiber Reinforced Plastics ( Frp ) Materials Are Processed By The Hand Laid Process Which Is Considered To Be The Best Of Its Type. We Use International Quality Of Gel Coats Which Is Duly Mixed With U.V Stabilized Pigment To Give Therequired Color To The Product. Thickness Of The Frp Material Varies From 4 Mm To 5 Mm As Per The Product In Attractive Color. •Bench Frame: Bench Frame Made Up Of 25Nb Hot Dipped Galvanized Pipe Of Class ‘’B’’ Heavy Duty Bend Acting As A Support To The Frp Seats Which Are Coupled To Each Other By Means Of Nut And Bolts Which Are Confirming To Astm E-1086 : 1994. •Powder Coating: It Shall Be Done With Pure Polyester Raw Material. Dry Film Thickness Maintained Within The Range Of 50-70 Microns. •Nut And Bolts: Galvanized Nut & Bolts Are Used With Pvc Bolt Caps. All Open Ends Of Pipe Been Closed By Gi / Pvc Caps For User Safety Against Entrapment. The Overall Weight Of Bench Shall Be 22 Kg Approx. The Legs Pipes Are Embedded In C.C. Blocks ( M20 Mix ) Of Size 0.45 X 0.45 X 0.45. Descriptions : • Product Area : 1.2M X 0.6M ( 4Ft X 2Ft )

Refer document

Refer document

Refer document