Urban Development Department-UDD has published Tender For Construction Of Dog Shelter In East Constituency Under Jnac Jamshedpur In East Singhbhum Dist. Submission Date for this Tender is 25-02-2023. Civil Work Tenders in jamshedpur Jharkhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B) |
2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including" cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
3 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : PCC - 1:1½:3 (1 cement :1½ coarse sand (zone-lll) :3 gradde stone aggregate 20 mm nominal size) |
5 | Providing R.C.C.M - 200 with nominal mix of (1:1½:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. |
6 | reinforced cement concrete work in walls (any thickness), including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers , abutments, posts and struts etc. above plinth level up to floor five level , excluding costo of centering, shuttering , finishing and reinforcement: 1:1½:3 (1 cement :1.5 coarse sand(zone-lll) :3 graded stone aggregate 20mm nomimal size) |
7 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
8 | Providing designation 75 B brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l. |
9 | Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters butteresses, plinth and string courses etc. |
10 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. |
11 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
12 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts andStruts. |
13 | Centering and shuttering including strutting, propping etc. and removal of form for Wather shade, Chajjas, corbels etc., including edges. |
14 | Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide. |
15 | Reinforced cement concrete work in beams, suspended floor, roofs having slope up to 150 landings, balcinoes, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).all complete as per building specification & direction of E/I. |
16 | Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (a) 10mm(TMT,Coil Fe 500) |
17 | Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. |
18 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and direction of E/l. |
19 | Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.) |
20 | Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume). |
21 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
22 | Providing and laying 15mm-23mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
23 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. |
24 | Providing and laying double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm |
25 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l. |
26 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
27 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) |
28 | S/F/F 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l. |
29 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
30 | Finishing walls with Acrylic Smooth exterior paint of required shade : (i)New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
31 | Providing 50 mm thick precast R.C.C.M - 150 with nominal mix of (1:2:4) in jali with approved quality of stone chips of 12mm and down well graded and clean coarse sand of F.M 2.5 to 3 with 1.6 mm thick M.S. wire as per approved design and drawing and placing the same in position true to plumb and level with 6mm dia M.S rods placed at regular intervals both horizontally and vertically as required and properly grouted with cement mortar ( 1 :3 ) including cost of curing, scaffolding and finishing all complete as per building specifications and direction or E/l. |
32 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
33 | Supplying, fitting and fixing C.A.R.W.D. pipe with necessary strips spikes, bends, shoes etc. including cost of carriage, all complete, as per building specification and direction of E/l. |
34 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. |
35 | Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l. (where steel is not supplied by the deptt.) |
36 | Providing one coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
37 | Loading and unloading of stone boulder/ stone aggregates/ sand/ kanker/ Earth/ moorum. (Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, execluding time for haulage and return tip) |
38 | Supplying Polythene water storage tank of ISI Mark (e.g. Sintex etc). 2NosX1000Liter. |
39 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
40 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x300 mm with single 15mm C.P. brass pillar tap |
41 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 17.32.3 Oval shape 450x350 mm (outer dimensions). |
42 | Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm |
43 | Providing and fixing PTMT bib cock of approved quality and colour : 15mm nominal bore, 86 mm long, weighing not less than 88 gms. |
44 | Providing and fixing15mm dia male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350gms.) with extra socket all complete as per specification and direction of Ell. |
45 | Providing and fixing 15mm size C.P. brass pillar cock (Weight not less than 350gms). C.l.bbdy brass spindle pillar cock of approved quality as per specification and direction of Engineer-in-Charge. (b) C.1. body brass spindle. |
46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes |
47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes |
48 | Supplying and fixing G.I. fitting of approved make (Conforming to IS 1879) all complete as per specification and direction of E/l. (1) Elbow 15mm dia |
49 | Supplying and fixing G.I. fitting of approved make (Conforming to IS 1879) all complete as per specification and direction of E/l. (1) Elbow 20mm dia |
50 | (2) Tee plain 15mm dia |
51 | (2) Tee plain 20mm dia |
52 | (3) Reducing socket 20mm dia |
53 | (4) Nipple 15mm dia |
54 | (4) Nipple 20mm dia |
55 | (7)Union Socket 15mm dia |
56 | (7)Union Socket 20mm dia |
57 | (8) Socket 15mm dia |
58 | (8) Socket 20mm dia |
59 | (9)Bends15mm dia |
60 | (9)Bends 20mm dia |
61 | (10) Jam nuts 15mm dia |
62 | (10) Jam nuts 20mm dia |
63 | Providing and fixing G.M. non-return valve Horizontal/ vertical type of approved qualilty as per specification and direction of Engineerin Charge. 15mm dia |
64 | Providing and fixing G.M. non-return valve Horizontal/ vertical type of approved qualilty as per specification and direction of Engineerin Charge. 20mm dia |
65 | S/F PVC conduit of following sizes along with accessories in surface/recess including cutting the wall and making good in the same as required 20mm |
66 | S/F PVC conduit of following sizes along with accessories in surface/recess including cutting the wall and making good in the same as required 25mm |
67 | Point Wiring in PVC conduit with modular type- Wiringfor Light/Fan point/Exhaust Fan point/Call Bell point with 1.5sq.mm.FRPVC Insulated Copper Conductor Single Core Cable in surface/recessed conduit with modular switch ,modular plate suitable size GI boxand earthing the point with 1.5sq mm FE PVC insulated copper conductor single core cable etc. as required. Group - A |
68 | Wiring for light/Power plug with 2 x4 Sq mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 no Sq mm FRPVC insulated copper conductor single core cable for loop earthing ass required. 2 x 2.5 sq mm +1 x 2.5 sq mm earth wire |
69 | Wiring for light/Power plug with 2 x4 Sq mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 no Sq mm FRPVC insulated copper conductor single core cable for loop earthing ass required. 2 x 4.0 sq mm +1 x 4 sq mm earth wire |
70 | S/F light plug pont with modular type accessories -supply and fixing of GI modular plac and cover in front on surface of in recess including providing and fixing 3 pin 5/6 and 5/6 Amp socket outlet and 5/6 Amp modular type switch connection etc as required |
71 | S/FBrass batton / Angle Holder in cluding connection etc as reqd |
72 | S/F 3 Pint 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd |
73 | 4 Way(4+12) TPN,MCB,DB Single door Horizontal |
74 | 63 amps TPN switch disconnector fuse unit with ISI Marked HRC fuses |
75 | S/F 5 Amp to 32 Amp rating 240 Volt ""B" Series miniature Circuit breaker suitable for inductive load of following pole in the exisiting MCB DB complete with connection testing and commissioning etc as reqd |
76 | S.I.T.Cof following rating surface mounted LED tube light fitting10/12 W LED Tube Light |
77 | Supply of 48"" (1200 mm) AC Celling Fan |
78 | Carriage of Cement |
79 | Carriage of Sand |
80 | Carriage of Stone chips |
81 | Carriage of Bricks |
82 | Carriage of Steel |
83 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal ofexcavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design building specification and direction of E/I (Sign Board) |
84 | Providing coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per buiding specification and direction of E/I.(Mode of measurement compacted volume) (Sign Board) |
85 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.(Sign Board) |
86 | Providing and laying in position cement concrete of PCC(1:2:4) graded stone aggregate 20 mmnominal size. Exciuding the cost of centering and shuttering. All work up to plinth level.(Sign Board) |
87 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. (Sign Board) |
88 | Providing designation 75 B brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.(Sign Board) |
89 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black Area of slab upto 0.50 sqm (Sign Board) |
90 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.(Sign Board) |
91 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.(Sign Board) |
92 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Sign Board) |
93 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Sign Board) |
94 | Loading and Unloading of stone bolder/ stone aggregates/ sand/ kanker/ earth/ moorum (placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip). (Sign Board) |
95 | Carriage of Cement(Sign Board) |
96 | Carriage of Sand(Sign Board) |
97 | Carriage of Stone chips(Sign Board) |
98 | Carriage of Bricks (Sign Board) |
99 | Total |
100 | Add GST @ 18% |
101 | Total |
102 | Add Labour Cess @ 1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail