Bids Are Invited For Civil Work 1 Earthwork In Excavation & Filling Earth Work In Excavation Including Back Filling Area By Mechanical Means ( Hydraulic Excavator ) Or Manual, Over The Area And Disposal Of Surplus Excavated Earth, Lead Up To 50M And Lift Up To 1.0M. Cft 530 2 Plain Cement Concrete Providing And Laying P.C.C. 1:4:8 Of Specified Thickness At Locations Specified At All Levels Using Msand, 40Mm And Downsize Metal Including Base Preparation, Compaction, Levelling, All Leads And Lifts, Curing And Shuttering If Necessary Etc., Complete As Per Directed By The Engineer. Cft 90 3 Masonary Works Size Stone Masonry: Providing And Constructing Size Stone Masonry In Cm 1:6 Using Granite / Trap Stones, In Courses Not Less Than 150Mm High Edges Of Stones Hammer Ressed Through Bond Stones Every 1.5M To 2.0M Intervals, Joints Between Stones Packed With Spalls And Cement Mortar, Exposed Joints Of Stone Masonry Neatly Racked To A Depth Of 25Mm For Receiving Pointing With Necessary Tools And Plant Etc. Complete. The Masonry Shall Be So Constructed Such That The Percentage Of Cement Mortar Shall Not Be More Than 30% Of The Total Volume Of Masonry. Cft 490 4 Providing And Laying P.C.C. 1:3:6 Of Specified Thickness At Locations Specified At All Levels Using Msand, 20Mm And Downsize Metal Including Base Preparation, Compaction, Levelling, All Leads And Lifts, Curing And Shuttering If Necessary Etc., Complete As Per Directed By Engineer. Cft 65 5 Providing And Constructing New 6 Block Masonry In 1:6 Cement Mortar ( 1 Cement : 6 Coarse Sand By Volume ) In True Line, Level And Plumb, Including Raking The Joints Upto 6 To 12 Mm Depth, Rubbing And Cleaning The Surface, With Necessary Scaffolding, Curing, Soaking Of The Bricks Adequately Before Construction, Complete As Directed And Specified By The Engineer, All Work Upto 12Ft Height. Cft 540 6 Providing And Laying Rcc Lintel In Position M20 Grade Nominal Mix Using 10Mm Main Bars And 8Mm Stirups Lintels Including Centering ( 20Mm Down Size Aggregate ) , Curing, Shuttering Etc. Rft 8 7 Plastering ( Internal And External ) : - Providing And Applying Plastering For Masonry Walls, Etc., In Cement Mortar 1:4, Average 15Mm Thick Finishing To Line And Level With Smooth, With Sponge Finish. Sft 2200 8 Ceramic Antiskid Tile Flooring - Providing And Laying In Position To Pattern Ceramic Antiskid Tile Flooring With A Backing Of Cement Mortar Bed ( To Make Up Required Finished Floor Level ) In Mix 1:6 Of Minimum 20Mm Thickness, Slabs Shall Have The Edges Machine Cut To Precise Sizes To Produce Very Fine Joints & Shall Be Pointed With The Matching Polymer Based Cement Grout, Including Approved Tile Cleaning To Remove Stains Including Polishing The Floor As Required Etc., Complete. Sft 430 9 Glazed Ceramic Tile Dado - Collecting And Laying To Pattern Glazed Ceramic Tile For Dado Of Specified Sizes, Colour And Make To Pattern In Cement Mortar Bed Of 1:3 Mix Of Minimum 10Mm Thickness Including Spacers, Pointing The Joints With The Matching Polymer Based Cement Grout Of Approved Colour, Cleaning With Approved Tile Cleaning Agent, Chipping, Finishing, Grooves, Chasing Wall Where Necessary, Making Good The Chased Surface Etc. Complete, As Directed By The Engineer. Sft 1200 10 Cement Tile Flooring - Providing And Laying In Position To Pattern Cement Tile Flooring With A Backing Of Cement Mortar Bed ( To Make Up Required Finished Floor Level ) In Mix 1:6 Of Minimum 20Mm Thickness, Slabs Shall Have The Edges Machine Cut To Precise Sizes To Produce Very Fine Joints & Shall Be Pointed With The Matching Polymer Based Cement Grout, Including Approved Tile Cleaning To Remove Stains Including Polishing The Floor As Required Etc., Complete. Sft 400 11 Pilasters:-Providing And Fixing 12Mm Thickness Hpl Compact Panel With Chambered Edge And Completed With Stainless Steel Made Thumb Turn Lock Set. Pilasters Will Be Anchored To The Floor Using Steel Made L Brackets And Box Up Fixtures Are Used For Covering The Floor Anchored Mechanism. All Pilasters Will Be Routered At Their Vertical Ends To Facilitate Closure Of Doors. The Bottom Gap Is 100Mm Dividers:- All Intermediate Partitions Or Dividers Will Be Made Of 12Mm Thick Hpl Compact Laminate Panels. They Are Affixed With Stainless Steel Made U- Channel At Their Ends For Ultimate Stability Of The System. Size Of Panel To Be As Per Drawings / As Per Requirement / Site Conditions. Hardware & Accessories:- Top Rail Is Made Of Stainless Steel Grade 304. A Thin Plastic Film Pasted For Surface Protection. Dimension Is 55Mmx42mmx1.6Mm - Tee. Corner Joinery Section Made From Stainless Steel Grade 304. Surface Finish To Be Brush Type. A Thin Plastic Film Pasted For Surface Protection. Size To Be 35Mmx15mmx0.8Mm - Tee. Wall Joinery Section With Hamming Profile Made From Stainless Steel Grade 304. Surface Finish To Be Brush Type.A Thin Plastic Film Pasted For Surface Protection. Size To Be 21Mmx16mmx0.8Mm - Tee. Fixed Front Panel To Be Anchored To Floor With L Bracket Of Ss And Covered With Ss 316 Grade Box Type Plate From All Directions With 100Mm Clear Height From Ground. Surface Finish To Be Matt Type. Spring Loaded And Coat Hook With Rubber Stopper Made From Stainless Steel Grade 304. Surface Finish To Be Matt Type. Round Door Knob Diameter 30Mm With Grooves For Better Hand Grip Made From Stainless Steel Grade 304. Surface Finish To Be Matt Finish. Rotating Thumb Turn Locking System With Privacy Indicator Made From Stainless Steel Grade 304. Surface Finish To Be Matt Finish. Anti -Noise Rubber Padding Of Thickness 2Mm And Width 10Mm. Stainless Steel Grade 304 Screws. Nos 10 12 Providing And Applying Two Coats With Acrylic Washable Distemper Of First Quality Approved Brand And Shade On Wall Surface Including Priming Coat With Distemper Primer After Throughly Brooming The Surface Free From Mortar Drops And Other Foreign Matter Incuding Preparing The Surfaces Even And Sand Paper Smooth, Cost Of Materials, Labour, Scaffolding Etc., Complete As Per Specifications. ( Rate To Include Cost Of Primer, Putty, Also ) Sft 800 13 External Wall Painting: Providing Two Coats Of Acrylic Emulsion Paint ( External ) To Walls & Ceilings Applied Evenly To Give Uniform Finish Including Preparation Of Surfaces Using Plastic Putty, Cement Primer Coat To Give An Even Shade. ( Asian / Jk / Birla ) Sft 1200 14 Supplyimg, Fiiting, Fixing And Installation Of Factory Made Solid Plain Wpc ( Wood Polymer Composite ) Doors Of Specified Size And 30Mm Thickness, Composed Of Rice Husk, 100% Fungus & Bacteria Proof & Acid Proof, Formaldehyde Free 100% Calibrated & Virgin Thermoplastic Single Extruded Which Should Be Termite Proof, Water Proof, Fire Resistant And Screw Able / Nail Able. Material To Be Of Density 550Kgs / Cum, 1600N Screw Holding Capacity On The Face And 900N On Edge Of Approved Shade / Colour Other Than White And Black, Hanged Over Hinges With 150Mm Baby Latch At Internal Face And Engaged - Vacant Lock On Outside. ( 304 Grade ) , Thickness Of Door Shutter 30Mm. The Rate Is Inclusive Of 100Mm Stainless Steel Hinges ( 3Nos For Each Hinge ) , Ss Screw, Ss 150Mm Handles ( 2Nos For Each Shutter ) , Ss 150Mm Tower Bolt ( 2Nos For Each Shutter ) , One No 250Mm Long Ss Sliding Bolt Etc Complete. Gap Between Wall And Door Frame, If Any, Shall Be Filled With Silicon Sealant Of Approved Make. Fixed Type Louvre At The Bottom Of Door Shutter To Be Provided As Per Standard Practice For Fresh Air Inlet. Nos 4 15 Suppying, Fitting, Fixing And Installation Of Factory Made Solid Wpc Door Frame 4X2.5Inch Door Frame, Composed Of Rice Husk, 100% Fungus & Bacteria Proof & Acid Proof Formaldehyde Free 100% Calibrated & Virgin Thrmoplastic Single Extruded Which Should Be Termite Proof, Water Proof, Fire Resistant And Screw Able / Nail-Able. Material To Be Of Density 725Kgs / Cum And Holding Capacity. Size Of Door Frame 4*2.5. Gap Between Wall And Door Frame, If Any, Shall Be Filled With Silicon Sealant. Rft 64 16 Roofing Works Structural Steel Works Fabrication Of Ms Tube And Angel 50X50x6mm Sections Ie. Pipes, Tubes, Angles, Plates Etc Including Welding Grinding Fixing In Position As Per Requirement. All The Steel Surface Shall Be Thoroughly Cleaned Free Of Rust And Including Cost Of Materials, Two Coat Of Paint, Fixtures, Labour Charges And Machinery Complete As Per Specification And Direction Of Engineer. Rft 200 17 Providing And Fixing Pre Coated Profiled Galvalume Roofing Sheet Of 0.5Mm Tct Coil.Base Metal Shall Be Cold Rolled Steel Having Yield Strength Of 550 Mpa With Zinc Aluminum Alloy Coating Az150 As Per Astm A 792 Or As 1397. Sheet Shall Be Fixed To The Purlins With The Help Of Hot Dipped Galvanized Self-Drilling Fasterners With Epdm Washers For Perfect Sealing. Sheet Shall Be Crest Fixed For Roofing And Valley Fixed For Gabbel End Etc. All Complete As Per Specification And Direction Of Engineer. Sft 400 18 Providing And Constructing Inspection Chamber Of Size 2X2x2 Including Cast Iron Top Cover.Complete As Per Directed By Engineer. Nos 6 19 Supplying And Laying The Cpvc Pipe . Size 25 Mm Diameter. Including All Bends, Colors, Elbow Etc As Per The Direction Of Site Incharge. Rft 200 20 Supplying And Laying Pvc Sanitary Line Including All Bends, Colors, Elbow Etc As Per The Direction Of Site Incharge. A ) 110Mm Rft 100 B ) 75Mm Rft 30 21 Providing And Fixing Hand Wash Basins Of Size 550 X 400 Without Pedestal Including The Brass Cp, Stop Cock, Cp Connections, Waste Coupling, Cp Brass Chain, Brass Cp Pillar Cock And Rubber Stopper, Bottle Trap With Cleaning Eye, Extension Piece And Wall Flange Etc. Rate To Include Supply And Fixing Of Necessary Ci Brackets With Nuts And Bolts And Fixing The Wash Basin With All Necessary Connections. Parryware Or Equivalent. Nos 6 22 Providing And Fixing Readymade Cp Brass Soap Tray Near Wash Basin With Cp Brass Screws Of Approved Make. Nos 4 23 Providing & Fixing Brass Full Way Gate Valve Isi Marked & Of Leader / Gg Make Or Approved Equivalent As Directed By Enginner In Charge.Size 25Mm Dia Nos 4 24 Providing Aluminum Ventilator With Exhasut Fan Including Bird Louvers, Frame Works And Other Civil Works Like Chipping And Making The Surface Good Etc Exhaust Fans 230Mm Dia Nos 10 25 Providing And Fixing Pvc Floor Trap Of Self Cleansing Design Conforming To Is Specs With 100Mm Inlet, 75Mm Outlet And 150Mm Cp Hinged Grating Of 6Mm Thick With Rim. Rate Shall Include Making All Necessary Leak Proof Connections Etc . Nos 14 26 Providing And Fixing Of Ss Bib Cock With Necessary Fittings. Parryware Or Equivalent. Nos 13 27 Providing And Fixing Of Ss Toilet Tissue Holder And Including All Type Necessary Fittings Etc. Nos 10 28 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W C Pan ) With Seat And Lid, 10 Litre Low Level White Pvc Flushing Cistern, Including Flush Pipe, With Manually Controled Device With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required:- Wc Pan With Isi Marked White Solid Plastic Seat And Lid. Parryware Or Equivalent. Nos 10 29 Providing And Fixing Water Closet ( Indian Type W C Pan ) With 100Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level Pvc Flushing Cistern, Including Flush Pipe, With Manually Controled Device With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required. Nos 2 30 Providing And Fixing White Vitreous China Flate Back Half Stall Urinal Of 580X380x350 Mm With White Pvc Automatic Flushing Cistern With Fittings, Standard Size Cp Brass Flush Pipe, Speeders With Unions And Clamps ( All In Cp Brass ) With Waste Fittings, Ci Trap With Outlet Gratings And Cutting And Making Good The Walls And Floors Wherever Required. Parryware Or Equivalent. Nos 6 31 Providing And Fixing Cp Brass Stop Cock Of Approved Quality With Necessary Fittings. Parryware Or Equivalent Nos 12 32 Providing And Fixing In Position Best Quality Approved Make Mirror Of Size 550X400mm Mounted On 6Mm Thick Plain Asbestos Sheet / Hard Board Backing With 4Nos Of Cp Brass Cap Screws And Washers Fixed To Wall With Necessary Plugs Etc;All Specified. Nos 6 33 Providing And Fixing Ss Health Fauset With Necessary Fittings. Parryware Or Equivalent Nos 12 34 Providing And Fixing 18Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Hand Wash Basins Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20Mm Thick Base Cement Mortar 1:4, Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish. Rft 15 35 Extra For Providing Opening Of Required Size And Shape For Wash Basin Similar Location In Granite Work, Including Necessary Holes For Pillar Cock Etc., Including Rubbing, Curing, Moulding And Polishing To Cut Edges Etc Complete. Nos 4 36 Providing And Fixing Urinal Granite Partition With Necessary Fittings As Per Direction Of Engineer Incharge Nos 4
