Military Engineer Services-MES has published Tender For Repair To Floors, Tiling, Anti Termite Treatment, Roofing Sheet, Ceiling, Gate Pillars, Staircase, Garages, Rolling Shutter Gear Box, Internal Water Supply And Connected Works At Af Stn Digaru.. Submission Date for this Tender is 18-03-2023. Gear Product Tenders in digaru Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Mar-2023 | Date Corrigendum | Date | 15-03-2023 |
| 2 | 15-Mar-2023 | Date Corrigendum 2 | Date | 18-03-2023 |
| 3 | 18-Mar-2023 | Date Extended 18Mar2023 | Admin Corrigendum Date Extend | 20-03-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L forVitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 3 | M&L forVitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 4 | M&L forfor non skid joint free coloured ceramic tlle 7 to 8 mm thick (square or rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement to match with and incluiding 15 mm thick screed bed in CM (1:6) ccomplete all as specified and as directed. |
| 5 | M&L for glazed ceramic coloured in vertical surface 300X200X7/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white/coloured cement to match with and including 10 mm th backing coat in CM (1:4) complete all as specified and as directed. |
| 6 | M&L for post construction anti termite treatement along the external walls below concrete or masonry apron using chamical emulsion@ 2.25 litres per linear meter including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 7 | M&L for postconstruction anti termite treatementof soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) tomatch the existing floors complete all as specified and directed. |
| 8 | M&L forpost construction anti termite treatement at points of contact of wood work by chemical emulsion (in oil or kerosenebased solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 9 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 10 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 11 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 12 | Dismantling wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed. |
| 13 | S&F Anodised aluminium snap grid frame work main Tee & cross Tee size 25.40X25.40X1.63 mm supported at ends with 38.10X25.40X1.32 mm forming grid 600x600 mm for false ceiling, suspended with 6 mm GI wire ,(upto 1200mm length). Adjusting level fixed to roof slab by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5mm dia 40 mm longcomplete all as specified and directed. |
| 14 | M&L for providing and fixing gypsum board 10 mm, thick in ceiling fixed with screws as per manufacturer instruction complete all as specified and directed. |
| 15 | M&L for 6mm thick nonAsbestos fibre cementbuilding boards , fixed or laid/inserted totimber/GI/Aluminium framework with screws complete all as specified and directed. |
| 16 | M&L for preparation of new ceiling surfaces and applying two coat of oil bound distemper complete all as specified and directed. |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 18 | Taking down unserviceable rolling shutters/sliding gates for repairang necessary greasing and replacement of UNSV portion like anchoring road, ball bearing, shutter etc and re fixing same openingcomplete all as specified and directed. Note:- Spare parts required shall be measured and paid for separately under relevant item as Supply only. |
| 19 | Supply only mild steel round bars Fe 410-W (Gde-E- 250) quality-A, in available lengths complete all as specified and directed. |
| 20 | SupplyonlyBall bearing for rolling shutter complete all as specified and directed |
| 21 | S&F steel rolling shutters of 1.25 mm thick without ball bearing as specified including top cover, anchoring rod, hasp & staple and one shop coat of primer; erected in position as indicated push pull or manual type complete all as specified and directed. |
| 22 | M&L for preparation of new or previously untreated steel surfacess of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 23 | M&L for preparation of old steel surfacess of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 24 | S&F in repair Chromium plated shower roses suitable for 15 mm bore pipe with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 25 | S&F in repairs Bib taps, suitable of 15 mm bore dia of pipe cast copper alloy fancy type with chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 26 | Supply only Nipple GI 15 mm X 50 mm long ISI Marked |
| 27 | Supply only Nipple GI 15 X 150mm long ISI Marked |
| 28 | Supply only Nipple GI 20 X 50mm long ISI Marked |
| 29 | Supply only Nipple GI 20 X 150mm long ISI Marked |
| 30 | Supply only Tee GI equal 15mm ISI Marked |
| 31 | Supply only Tee GI equal 20mm ISI Marked |
| 32 | Supply only Reducing Tee GI 20 X 15 mm ISI Marked |
| 33 | Supply only Tee reducing GI 25 X 15mm ISI Marked |
| 34 | Supply only Elbow GI 15mm ISI Marked |
| 35 | Supply only Elbow GI 20 mm ISI Marked |
| 36 | Supply only Tank nipple GI 15mm ISI Marked |
| 37 | Supply only Tank nipple GI 20mm ISI Marked |
| 38 | Supply only Socket GI 15 mm ISI Marked |
| 39 | Supply only Socket GI 20mm ISI Marked |
| 40 | Supply only Union GI 15mmISI Marked |
| 41 | Supply only Union GI 20 mmISI Marked |
| 42 | Supply only Plug threaded GI 15 mm ISI Marked |
| 43 | Supply only Plug threaded GI 20 mm ISI Marked |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
