|
| 1 | Spares for KIRLOSKAR MAKE , KC-09 Model Ammonia Compressors |
| 2 | Crank Shaft Assembly Complete (Part no. 340.03.001.50) |
| 3 | Bearing Bush (STD) Pump End(Part no. 082.28.050.50) |
| 4 | Thrust Ring (Part no: 336.02.004.50) |
| 5 | Thrust Ring (Part no: 336.03.005.50) |
| 6 | Driving plate (Part no: 082.28.060.50) |
| 7 | Retaining Plate Assembly (Part no. 336.14.114.50) |
| 8 | Bearing Bush (STD) Drive End (Part no.336.02.003.50) |
| 9 | Connecting Rod bolt(Part no.082.04.040.51) |
| 10 | Bearing Intermediate Half (STD) (Part no.086.15.030.50) |
| 11 | Shaft Seal(Part no.082.08.000.50) |
| 12 | Piston assembly(Part no.082.03.000.50) |
| 13 | Plate Safety(Part no.082.03.040.50) |
| 14 | Set of Piston Rings (Part no.082.03.150.50) |
| 15 | Big End Bearing Half STD(Part no.082.04.030.50) |
| 16 | Gudgeon Pin Bush (Part no.082.04.020.50) |
| 17 | Connecting Rod with Bolt (Part no.082.04.070.50) |
| 18 | Delivery Valve Assembly (Part no.336.12.003.50) |
| 19 | Suction ValveSpring (Part no.336.12.001.50) |
| 20 | Suction ValveRing (Part no.082.28.130.50) |
| 21 | Suction Stroke Limiter (Part no. 336.12.002.51) |
| 22 | Cup Spring (Part no.336.12.011.50) |
| 23 | Cylinder Liner Assembly (Part no.336.04.000.50) |
| 24 | Cylinder Liner (Part no.336.04.001.51) |
| 25 | Safety Plate (Part no.082.04.050.50) |
| 26 | Unloader Piston Assembly (Part no.336.05.007.50) |
| 27 | Unloader Piston Complete (Part no.336.05.001.50) |
| 28 | Oil Pump Assembly (Part no.082.07.000.50) |
| 29 | Bearing Bush (Part no.082.07.330.50) |
| 30 | Filter Wire Gauge (Part no.336.10.009.50) |
| 31 | Paper Filter (Part no.351.09.014.50) |
| 32 | Suction Filter Assembly (Part no.336.10.023.50) |
| 33 | Discharge Filter Assembly (Part no. 336.10.031.50) |
| 34 | TAH-8 Valve Assembly (Part no.351.09.003.50) |
| 35 | O-Ring (Part no.999.12.909.50) |
| 36 | Suction Strainer Element Assembly (Part no.086.12.020.50) |
| 37 | Oil Line Number-D (Part no.340.03.128.50) |
| 38 | Oil Line Number-C (Part no.336.14.127.50) |
| 39 | Oil Line Number-A (Part no.336.14.125.50) |
| 40 | Oil Level Glass (Part no.351.09.043.50) |
| 41 | Side Cover (Part no.082.28.110.52) |
| 42 | Cylinder cover (Part no.084.28.100.50) |
| 43 | Stud (Short) M16 X35 (Part no.999.03.700.50) |
| 44 | Stud (Long) M16 X65 (Part no.999.03.710.50) |
| 45 | Hexagonal HD Screw M16X35 (Part no.999.01.690.50) |
| 46 | Set of Safety Valve Parts (Part no.336.13.00) |
| 47 | Kit Gasket/ O Rings/ All Packing for KC-9 compressor (Part no. Not applicable) |
| 48 | Kit Oil Pump Gear (Part no.0852805) |
| 49 | Kit Liner Parts (Part no.0852810) |
| 50 | Kit-Shaft Seal “O” Ring (Part no.0852804) |
| 51 | Intermediate Bearing Assembly (Part no.086.15.040.50) |
| 52 | Hex Nut M16 (Part no.999.06.687.50) |
| 53 | Bearing Cover Assembly Drive end (Part no. 36.02.001.50) |
| 54 | Bearing Cover Assembly Pump end (Part no.082.02.001.50) |
| 55 | Stud for Bearing Cover M12 X 125L (Part no.999.03.688.50) |
| 56 | Stud for Bearing Cover M12 X 100L (Part no.999.03.683.50) |
| 57 | Hex nut M12 (Part no.999.03.650.50) |
| 58 | MP-1 Low suction Pressure Cover Out for KC-9 Compressor (Part no.999.52.069.02) |
| 59 | MP-5 Low suction Pressure Cover Out for KC-9 Compressor (Part no.999.52.069.04) |
| 60 | MP-55 Low suction Pressure Cover Out for KC-9 Compressor (Part no. 999.52.069.08) |
| 61 | Solenoid Valves for KC-9 Compressor (Part no.082.25.030.50) |
| 62 | Key FOR FLYWHEEL / SHAFT KEY (Part no.082.28.191.50) |
| 63 | FLY WHEEL / COMPRESSOR PULLEY (Part no.350.010.1450) |
| 64 | OIL RETURN VALVE ASSY FOR R1(Part no.082.060.0050) |
| 65 | KC BUFFER SPRINGS (Part no.082.28.090.50) |
| 66 | CYLINDER LINER for KC-09 (Part no.336.40.40.150) |
| 67 | GUDGEON PIN BUSH (Part no. 082.030.2050) |
| 68 | PISTON(Part no.082.031.1050) |
| 69 | Gasket KPGM 3/B (Part no.082.256.5050) |
| 70 | RING TEFLON (Part no.336.130.0250) |
