Department Of Education-DOE has published Bids Are Invited For Tools And Equipement Mse Angle Gauge For Tool Grinding , Angle Plate , Bench Vice , Bore Dial Gauge Stems , Boring Tool Holder , Caliper Inside Spring Joint , Caliper Odd-Leg Firm Joint , Caliper Outside Spring Joint , Centre Punch , . Submission Date for this Tender is 28-02-2023. Cutting Crimping and Punching Tools Tenders in Agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Title | Item Description |
1 | Angle Gauge for tool grinding | Standard |
2 | Angle Plate | Adjustable-150X175X250 mm |
3 | Bench vice | 125 mm jaw |
4 | Bore dial gauge stems | 12to35mm,35to65mm., dialgaugeindicatorof0.01 accuracy. |
5 | Boring Tool holder | 6 mm sq. tool bit |
6 | Caliper inside spring joint | 150 mm |
7 | Caliper odd-leg firm joint | 150 mm |
8 | Caliper outside spring joint | 150 mm |
9 | Centre punch | 100 mm |
10 | Chisel cold flat | 20 x 150 mm |
11 | Collapsible Tap with attachment | Optional |
12 | Combination Drill - Centre Drill | A3, A4 and A5 |
13 | Combination set | 300 mm Complete Set |
14 | Coventry Die head | Optional |
15 | Coventry Type Die Head Self-opening | Optional |
16 | Depth Gauge Micrometer | 0 to 150 mm, Least Count 0.01 mm with NABL Accredited lab. Certificate |
17 | Dial Vernier Caliper with metric | 200 mm, Least Count 0.05 mm with NABLAccreditedlab. Certificate |
18 | Die and Wrench | 6,8,10,12 |
19 | Digimatic electronic outside Micrometer | 0 to 25 mm and 25 to 50 mm LC 0.001 mm. |
20 | Digimatic Electronic Vernier Caliper | 200 mm |
21 | Divider spring joint | 150 mm |
22 | Dog Carrier | 25, 50 and 75 mm |
23 | File flat | 300 mm rough |
24 | File flat | 250 mm 2nd cut |
25 | File flat | 250 mm smooth |
26 | File half round | 250 mm 2nd cut |
27 | File half round | 150 mm smooth |
28 | File round | 250 mm smooth |
29 | Gauge - Radius Set | 1 mm to 25 mm by 0.5 mm |
30 | Gauge Drill Grinding | Standard |
31 | Hacksaw fixed | 200 mm Pistol grip |
32 | Hammer ball peen | 250 gm with handle |
33 | Hammer ball peen | 750 gm with handle |
34 | Hammer copper-brass | 500 gm with handle |
35 | Hand Chaser | M-12 and M-16 Internal |
36 | Knurling tool revolving head | Rough,med, fine diamond and straight |
37 | Lathe Mandrels Diff. Types | Optional |
38 | Machine Chaser | M-12 TOM-21 Std. Series to suit on |
39 | Magnetic Chuck | 150 mm dia.Circulartype |
40 | Magnifying Glass | 75 mm with magnifyingfactor 10X |
41 | Marking table CI | 120 x 120 cm |
42 | Micrometer Inside | up to 25 mm, Least Count 0.01 mm with NABL Accredited lab. Certificate |
43 | Micrometer Outside | 50to 75 mm, Least Count 0.01 mm with NABL Accredited lab. Certificate |
44 | Morse Taper Plug and Ring Gauge | No. 0 to 7 MT |
45 | Oil Can | ½ pint pressure feed system |
46 | Oil Stone | 12 mm sq. x 100 long fine |
47 | Parting Tool Holder with H.S.S. blade | Standard |
48 | Plain Ring and Plug Gauge | 12,16,20,25,30,32,36,40,45,50 mm |
49 | Pliers flat nose | 150 mm side cutting |
50 | Power saw machine – hydraulic feed system | 400mm. Blade size, Motor Capacity -0.75 KW |
51 | Prick punch | 100 mm |
52 | Safety goggles clear glass Good quality | Standard |
53 | Screw Pitch Gauge | WhitworthandMetriceach 0.25 to 6mm |
54 | Screw Thread micrometer interchangeable | 0-25 mm |
55 | Screwdriver | 10 X 200 mm |
56 | Scriber | 150mm x 3 mm |
57 | Sine Bar with centers | 200 mm |
58 | Slip Gauge metric set | 87piecesina Box with workshop grade |
59 | Spanner adjustable | 200 mm |
60 | Spare Grinding Wheel Ajax type for carbide tool | As per M/C Bore Dia |
61 | Spirit Level | 0.05 mm / 200 mm |
62 | Steel Rule | 150 mm,Graduatedbothin Metric and English Unit |
63 | Steel Rule | 300 mm with Metric and Inch |
64 | Surface Plate - Granite | 1000 x1000mmwithStand and Cover |
65 | Tap and Die | B.A. No. 0 to 10 in a box |
66 | Tap and Die | B.S.F. up to 1 inch |
67 | Tap and Die | B.S.W. up to 1 inch |
68 | Tap and Die Set | Metric - 3 to 24 mm |
69 | Tap Wrench adjustable | M6,M8,M10,M12 |
70 | Tool Bit assorted sizes on holder | Standard |
71 | Tool Bits | 12 X 150 mm sq.assorted shaped |
72 | Tool Cemented carbide assorted shaped External for steel turning | set of 12 nos. |
73 | Tool holders | specification asperAnnex-A and A I |
74 | Tool Maker’s button | Standard |
75 | Try Square | 150 blades |
76 | Twist Drill | straight shank 3 to 12 mm by 1 mm |
77 | Universal Dial Test Indicator - Plunger Type | Range0-10mm,Graduation 0.01 mm completewith Clamping Devices and Magnetic Stand |
78 | Universal Surface gauge | 250 mm arm |
79 | Vernier Bevel Protractor | 300mmblade withNABL Accredited lab. Certificate |
80 | Vernier Caliper Outside, Inside and Depth | 200 mm- 8 inches with metric andinch scaleL.C.0.02mm with NABL Accredited lab. Certificate |
81 | Vernier Micrometer | 25- 50 mm, outside Least Count 0.001mm with NABL Accredited lab. Certificate |
82 | Wheel Dresser Diamond | inserted-0.75 or 1 Carat |
83 | Wheel Dresser Hunting on-type with star cutter | Standard |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail