Educational and Research Institute Boards / Undertakings / PSU Closing in 0 days TDR #36339452

Tender For Rejuvenation Of Basic Infrastructure In Government Schools - Construction Of Boundary Wall / Toilet Construction / Drinking Water Facility / Repair Works In Government Schools) - Rejuvenation Of Basic Infrastructure In Gss Pahada Block-Naya

Issued by Boards / Undertakings / PSU · nayagaon, Rajasthan
Tender Value
9.81 Lakhs
Estimated cost
Bid Submission
28 Feb 2023
0 days left
EMD
19620
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
nayagaon → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Rejuvenation Of Basic Infrastructure In Government Schools - Construction Of Boundary Wall / Toilet Construction / Drinking Water Facility / Repair Works In Government Schools ) - Rejuvenation Of Basic Infrastructure In Gss Pahada Block-Nayagaon Udaipur

BOQ

Name of Work: MAJOR REPAIR WORK AT GSS PAHADA BLOCK- NAYAGAONDISTRICT- UDAIPUR
Sl. No. Item Description
1PART A ( CIVIL WORK) BASED ON PWD BSR 2022
2Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
3Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paintAdd extra for double leaf shutters.
4Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.
5Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
6Providing and fixing Square bars or other flat welded to window, ventilatiors etc.
7Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground
8Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meters lead:Of area 3 square meter and below.
9Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand)For area of each slab from 2001 to 5000 Sq.Cm
10Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work
11Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick.
126 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand)
13Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
14P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant.110 mm dia
15Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats)
16Wiring of light point/fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVCinsulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make group-2
17Short point (up to 3 mtr.)
18Medium point (up to 6 mtr)
19Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVCinsulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make in surface/reces group - On board
20S & F follwing sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using clamps, fastener as required including cutting the wall , covering conduit with wire mess and making good the same as required. Group-220 mm dia
21Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface of necessed conduit/ casting capping including making connections etc. as required. Group-2
222 x 2.5 sq. mm. + 1x1.5sqmm
232 x 4.0 sq. mm. + 1 x 2.5 sq. mm.
24P & F 240/415 V MCB of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828 (1996)/conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required. Group-2 6 A to 32 A rating
25Double pole 6 A to 32 A rating
26P & F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with 100 Amp copper copper bus bar, shorting link, neutral, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB termination with copper lux, testing etc. as reqd. . group-2Double door(Single Phase) 8 way
27P & F strip fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating/stove enamelled non corrosive UV resist EP channel)complete with accessories(Low loss copperchoke, starter, starter seat)/Electronic choke with terminal block duely prewired with copper conducter including making connection, testing etc. as required(Without tube)1x36 watts with OCCB. Group-1
28P & F star rated double ball beari;ng capacitor start, aluminium bodyand blade ceiling fan with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required.1200 mm sweepgroup-1
29P & F IS:371 marked 6 amp suffacetype celling roseinculuding making commection testing etc. group-2
30P & F ISI marked 6 amp bakelite batten/ angle holder including making connextion testing etc as required
31Providing & Fixing of of M.S. J- hook of standard design made out of 16 mm dia. M.S. round bar and fixed with cement concrete mortar with required support as required.
32P&F 240/415 V isolator conforming to IS : 13947-III/ IEC 60947-3 on existing board/ sheet including making connection, testing etc. as required 30 A/ 40 A rating.
33P & F socket size flush type 120/280 watt rotary 5 steep fan regulator including making connection testing etc. as required.
34Supplying and fixing of power plug point with Modularaccessories as per PWD specification for electrical Works, on hotdippedgalvanizedmodularboxof18SWGwith earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 3/5 pin 16 amp. socket outlet (IS:1293) [ as per detailed in respective item in BSR] , making connection , testing , etc. as required.All as per pre approved by Engineer in charge.For additionaltechnicalparametersofproducts/work ,refer Annexure \"A\" attached with
35Plate Earthing as per PWD specification for electrical Worksas per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. \"B\" class watering Pipe,including all accessories like nut, bolts, reducer, nipple,wire meshed funnel, and Heavy duty weather proof poly propylene earth pit chamber with lockable Jam free lid suitable for safeworking load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\"attached with this BSR .

AI Tender Summary

OUR REF NO 36339452
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 9.81 Lakhs
LAST DATE 28-02-2023
Authority
Authority Name RAJASTHAN COUNCIL OF SCHOOL EDUCATION
Work Description Tender For Rejuvenation Of Basic Infrastructure In Government Schools - Construction Of Boundary Wall / Toilet Construction / Drinking Water Facility / Repair Works In Government Schools ) - Rejuvenation Of Basic Infrastructure In Gss Pahada Block-Nayagaon Udaipur
Basic Detail
Tender No NIT NO.19(CIVIL)/2022-23/UDAIPUR
Bidding Type Tender
Location
City nayagaon
State Rajasthan
Key Dates
Publish Date 17 Feb 2023
Submission Date 28 Feb 2023
Open Date 01 Mar 2023
Finance
Tender Value 9.81 Lakhs
Tender Fee 1000
EMD 19620
Exemption Not Available
Document List
83417e54-3da6-40b1-80c4-f397f35cb1cc.html
BOQ_567473.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 17, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 28, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 01, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

83417e54-3da6-40b1-80c4-f397f35cb1cc.html

xls

BOQ_567473.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders