Rewiring Of Staff Quarter Type Ii Under The Division Ee(Sdw)Ix Rithala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Feb 2023
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rithala → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Rewiring Of Staff Quarter Type Ii Under The Division Ee ( Sdw ) Ix Rithala
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano types switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulted copper conductor single core cable etc as required. |
| 2 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulted copper conductor single core cable as earth wire in existing surface / recessed steel / PVC conduit including dismantling as required. |
| 3 | Supply and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections/ painting etc. as required. |
| 4 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16A piano type switch, connections painting etc as required. |
| 5 | Wiring for circuit /Submain wiring along with earth wire with the following sizes of FRLS PVC insulted copper conductor, single core cable in surface/recessed medium class PVC conduit as required2x2.5sq.mm+ 1x2.5sq.mm earth wire. |
| 6 | 2x4sq.mm+ 1x4sq.mm earth wire. |
| 7 | 2x6sq.mm+ 1x6 sq.mm earth wire. |
| 8 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 3 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 9 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 10 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powered painted including earthing etc. as required 8 way double door. |
| 11 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB SP complete with connections, testing and commissioning etc. as required, Single pole |
| 12 | Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DP complete with connections, testing and commissioning etc. as required, double pole |
| 13 | Supplying and fixing 63 A rating, 240V, isolator in the existing MCB DP complete with connections, testing and commissioning etc. as required, double pole |
| 14 | Supply of 35 sq mm 3.5 core LT aluminium power cable. Make:-Havells/Gloster/Universal/Grandlay/ICC/ICU/any other DJB approved make of DJB |
| 15 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq mm |
AI Tender Summary
Tender Timeline
Feb 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 25, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender