Supply & Installation Of Furniture For Mahatma Gandhi Stadium, Tumkakuru , Refreshment Table (Rft):Size : P/F Movable Table Made From 18Mm Thick Table Of Size 1200X800mm Top Made Of Particleboard With Pvc Lamination Of Having Propeties- Heat Resistant-No Adverse Effects From Hot Food On Its Surface, Damp Proof-Damp Proof Features With Sealed Surface And Edges, Stain Resistance-Resistant Against Corrosive & Sticky Substance From Liquid Or Solid Food, Scratch Resistant- Withstand Scratching From Crockery And Cutlery, Minimum Maintenance-Simply Wiping With Wet Cloth To Remove Stains Of Approved Colour As Per The Directions Of Engineer-In Charge And Includes Ss Vertical Support Of Size W1200 X D 800 X H 725 Of Make Nilkamal, Godrej Or Equivalent As Per Engineer Incharge.,Refreshment Chair (Rc1) : Supply And Installation Of Injection Moulded Shell Made Of Poluproplene Chairs With Ss Pipe Having Size Of 16Mm Dia With 2Mm Thickness, Stackable. Special Joinery To Asseble The Shell With Free Assembly. Nylon Foot Cap. Size 530W X 550D X 805 H Mm Of Make Nilkamal, Godrej Or Equivalentas Per Engineer Incharge.,Reception Table (Rt): Providing And Fixing Of Table In Ground Floor Of Approved Design By Engineer In Charge Of Overall (Min) Size 7000 (L-Shape) X700x750mm Which Shall Be Made Of Made Of 19Mm Commercial Isi Plywood. Vertical Support Includes Plywood Boxing On One Side Of 900Mm Length X 488Mm Width With Cabinet Storage System That Includes One Shelf Supported On Pin Shelf System. Another Vertical Support On Plywood Boxing Of 610Mm Length X 488Mm Width With Drawer Storage System Comprising Of 3 Drawers Made Of Ply And Ebco Or Equivalent Drawer Channels Fixed With Locks. Both Vertical Separated Using 19Mm Ply Panel. All Of These To Be Finished With 1Mm Thick Laminate Of Approved Shade And Texture. Tabletop Made Of 19Mm Ply With 50Mm Facia Finished With Textured Laminate Of Higher Grade And Approved Colour. Perpendicular Pedestal Unit Consisting Of One Column Of Drawers (3Nos) And Twin Door Cabinet Finished With Ply And Laminate Of Approved Shade And Texture. Rear Tall Storage Unit Made Of 19Mm Ply Of Overall Size 1500Mm Width X 400 Depth X 2100 Height To Consist Of 70% Closed Cabinets And 30% Open Shelves To Be Finished With Laminate Of Approved Shade And Texture.,Guard Table (Gt): Providing And Fixing Table Unit Consist Main Table With Pedestal Unit With All Necessary Accessories .Main Table -1200 Mm X 600 Mm X 750Mm , Top And Gable End Of 25Mm Thick Pre-Laminated Partical Board With Edge Band All Around Of Approved Colour And Texture. Modesty Made Of 18Mm Thick Pre-Laminared Baord. Gable Foot Brackets Mde Of Steel With Nylon Levelers. Reinforecement Tube Below The Top To Avoid Sagging. Top Supported Pedestal Is Providd In Box/Box/Box (Bbb) Configuration. Pedestal Includes Wooden Drwes With Bottom Mounting Slide. Finsish- Wenge Of Make Nilkmal, Godrej Or Equivalent As Per Engineer Incharge.,Pelmet: Providing And Fixing Gypsum Pelmets Of Upto 150Mm/200 Mm X 150 To 300 Mm L Shape Made Of 19 Mm Ply Covered With 12.5 Mm Thick Gypsum. Rate Inclusive Of Lipping, Cutting, Wastages, Necessary Fixtures, Nails, Adhesives, Necessary Scaffolding, Fixing At All Heights And For All Floors As Per Drawing And Approved Sample Etc Should Also Take Load Of All The All Roller Blinds As Per Engineer Incharge.,Gypsum Celing: P/F 20Mm Thick Gypsum Cladding Of 1800Mm X 2400Mm Panel Of Corrugated Pattern Fixed Using Self Tapping Screw On Wall Directly And Painted With Approved Colour As Per Engineer Incharge.,Painting: Providing & Applying Paint - Painting Work With Asian Make Plastic Paint Of Approved Colour On Wall & Ceiling In Library In Three Coats With Necessary Primer And Base Coat ,Including, Scrapping, Cleaning And Leveling The Surfaces By Approved Quality Paint Ofasian Paint / Ici Makeor Equivalent. The Rate To Include Necessary Scaffolding Etc. Completeas Per Engineer Incharge. ( Inside Building Only ),Wallpaper: Providing And Fixing Canvas Of Vinyl Based Wall Papers As Per Approved Colour And Texture And Washable Make. Work Complete Including All Type Of Material, Fittings , Fixtures,Finish, Loading , Unloading , Transporation, All Leads ,Accessories, Sample Mockup, All Floor , All Levels, All Heights , Necessary Frame Work,Scafffolding Etc,Roller Blinds : Providing And Fixing Blinds As Per Approved Make As Per Suggested Shade & Spring Drive System With Steel Ball Chain/One Touch With Speed Control Action Roller Blind With End Brackets With Head Rail, Components, Bottom Bar. Fabric : Screen Classic 5% Fabric Value : 465 Gsm ,Thickness : 0.65 Mm Fabric To Be As Per Approved Sample As Per Engineer Incharge.,Full Height Storage (Fs): Storage To Be Placed On Left And Right Hand Side Of Player Dormitories,Coaches Dormitories,V.I.P Rooms,Office Section Attached To Wall After The Complettion Of The Wall Finishing . P/F Storage Unit Of 0.275 M Depth Made Out Of 19M Thick Commercial Ply Vertical Support Finished In Approved 1.00 Mm Laminate With 12Mm Thick Ply Packing Internaly Finished With 1Mm Laminate Of Approved Colour And Shade Shelves Shall Be Formed Out Of 19Mm Ply Finished With 1Mm Laminate Of Approved Shade And Colour And Appropriate Grooves To Be Given As Per The Drawing And To Be Fixed On The Wall With Sppropriate Bolts, Complete The Rate Includes Cost Of All Materials Labour Charges As Per Engineer Incharge.,M.D Table (Lt): P/F Table Made Of 19Mm Commercial Isi Plywood. Vertical Support Includes Plywood Boxing On One Side Of 900 Legth 490Mm Width With Cabinet Storage System That Includes One Shelf Supported On Pin Shelf System. Another Vertical Support On Plywood Boxing Of 600 Legth X 490Mm Width With Drawer Storage System Comprising Of 3 Drawers Made Of Ply And Ebco Or Equivalent Drawer Channels Fixed With Locks. Both Vertical Separated Using 19Mm Ply Panel. All Of These To Be Finished With 1Mm Thick Laminate Of Approved Shade And Texture. Table Top Made Of 19Mm Ply With 50Mm Facia Finished With Textured Laminate Of Higher Grade And Approved Colour. Perpendicular Pedestal Unit Cosisting Of One Column Of Drawers (3Nos) And Twin Door Cabinet Finished With Ply And Laminate Of Approved Shade And Texture. Rear Tall Storage Unit Made Of 19Mm Ply Of Overall Size 1500 Width X 400 Depth X 2100Mm Height To Consist Of 70% Closed Cabinets And 30% Open Shelves To Be Finished With Laminate Of Approved Shade And Tecture,Full Height Storage (Fs1): Storage To Be Placed On Either Sides Of Corner Column . P/F Storage Unit Of 500 Mm Depth Made Out Of 19M Thick Commercial Ply Vertical Support Finished In Approved .8 Mm Laminate With 12Mm Thick Ply Packing Internaly Finished With .8Mm Laminate Of Approved Colour And Shade. 5 Shelves Shall Be Formed Out Of 19Mm Ply Finished With 0.8Mm Laminate Of Approved Shade And Colour. Shutter Made Of 19Mm Board Finished With 1Mm Thk Laminate On Both Sides Of Approved Colour And Texture. Complete The Rate Includes Cost Of All Materials Labour Charges. Size: 3000Mmx2700mm As Per Engineer Incharge.,Storage Rack): P/F Storage Unit Of 275Mm Depth Made Out Of 19M Thick Commercial Ply Vertical Support Finished In Approved 1.00 Mm Laminate With 12Mm Thick Ply Packing Internaly Finished With 1Mm Laminate Of Approved Colour And Shade Shelves Shall Be Formed Out Of 19Mm Ply Finished With 1Mm Laminate Of Approved Shade And Colour, Complete The Rate Includes Cost Of All Materials Labour Charges As Per Engineer Incharge.,Laminate Finished Wooden Partition : Providing & Fixing 12 Mm Thick Commercial Plywood Fixed On Frame Work On Two Side Where Required And Finished With 1 Mm Thick Laminate Of Approved Colour And Texture. The Frame Work Shall Be Made From Square Hollow Aluminium Section Of Approved Make Conforming To Is Specification Of Size 38 X 38 X 1.6 Mm Vertically And Horizontally. The Framework Shall Be Fixed Vertically @ 600 Mm C/C & Horizontally 1200 Mm C/C And First Horizontal Member Shall Be Fixed At Gr. Level. In Partion Frame Work (Intermediate, Perimeter ) & (At Vertical Or Horizontal Joint Of Ply & At Turning Point ) Shall Be Fixed To The Wall/Floor & Ceiling With Sheet Metal Screws/Nylon Grip Screws Of Corro-Shield /Fischer And Shall Be Supported By Filling Required Size Wedges /Washers/ Ms Wall Connectors Or Packings Of Teak Wood /Ms Washers To Ensure Right Angles And Plumb Level. All Ply/Wooden Frameworks Shall Be Treated With Anti-Termite Treatment & Hidden The Framework Shall Be Covered With Approved Make Plywood ,Adhesive ,Tape, Headless Nails Etc ,Finished With Laminate As Per Engineer Incharge.,Planter Box With Ornamental Plants As Approved By Engineer In Charge.,Providing And Fixing Of Cnc Cut Map In Wood With Mdf On Walls Including All Labour, Material, Lead And Lift, Transportation Hom All Complete Work As Per Engineer Incharge.,Proving And Fixing Of Various Art Work As Per The Approved Drawings And Design Including Material, Labour, Lead And Lift, Transportation Hom All Complete Job As Per Engineer Incharge.,Players Dormitories A.Providing And Fixing Bunk Beds : To The Players Rooms Dimensions 6 Ft. X 2.5 Ft As Per Engineer Incharge..,Coaches Dormitories A. Providing And Placing King Size Beds : Dimensions,72 To 78 Inches(1.83 To 1.98),72 Inches(1.8M) As Per Engineer Incharge..,B. Provinding And Placing Side Table :H 650 Mmx D 450Mm( Gen Specifications Attached) As Per Engineer Incharge.,C. Providing And Placing Study Tables :P/F Table With 19Mm Commercial Isi Ply Top Of 40 Mm Fasia All Round Finished With 1Mm Laminate And Supported On Ms Legs Of 800Mm Ht And Finished With Enamel Paint (Double Coat). Size 1000Mmx610mmx700mmht As Per Engineer Incharge.,D. Providing And Placing Chairs:Supply Of Office/Visitor Chairs With Seat D X W X H 450Mm 470Mm 460Mm Padded With Polyurethane Foam (Gem Specifications Attached) As Per Engineer Incharge.,V.I.P Rooms A. Providing And Placing King Size Beds : Dimensions,72 To 78 Inches(1.83 To 1.98),72 Inches(1.8M) As Per Engineer Incharge..,B. Provinding And Placing Side Table/Coffee Table :H 650 Mmx D 450Mm( Gen Specifications Attached) As Per Engineer Incharge..,C. Providing And Placing Sofa : Upholstered With A Premium Quality Fabric & Cushioning (Specifications Attached) As Per Engineer Incharge.,D.Providing And Pacing TableTv Unit : Table/Tv Unit With 19Mm Commercial Isi Ply Top Of 40 Mm Fasia All Round Finished With 1 Mm Laminate And Supported On Ms Legs Of 800Mm Ht And Finished With Enamel Paint (Double Coat). Size 1000Mmx610mmx700mmht As Per Engineer Incharge.,Office Cabins A. Main Table: Providing And Placing Main Table Made From 19Mm Commercial Isi Ply Top And All Round 50 Mm Facia Finished With 1 Mm Laminate And Matching Edge Binding Of 1 Mm Thickness Of Approved Colour And Texture. Table Top Supported On Mild Steel Legs Of Sections 12 Mm X 50 Mm Upto Height Of 800Mm Ht And Finished With Enamel Paint (Double Coat) As Per Approved Colour. Ms Support Includes 2 Vertical Frames On The Shorter Side And One Vertical Frame On The Longer Side Along With Plastic Bush At The Bottom. (6 And 4 Seater) As Per Engineer Incharge.,B. Providing And Placing Md Chair : Supply Of Office/Visitors Chairs With Seat D X W X H 450 Mm 470 Mm 460 Padded With Polyurethane Foam (Gem Specifications Attached) As Per Engineer Incharge.,C.Providing And Placing Visitor Chair:Supply Of Office /Visitor Chairs With Seat Dxwxh 450Mm 470Mm 460Mm Padded With Polyurethane Foam As Per Engineer Incharge.(Gem Specifications Attached),D.Providing And Placing Sofa : 3+1 Seater Sofa Upholstered With A Premium Quality Fabric & Cushioning As Per Engineer Incharge. (Specifications Attached).,E. Workstation : Providing And Fixing Straight Workstation (Frame) Consisting Of Back To Back Unit Made Out Of 75 Mm Thick Ms Crca Poivder Coated, Tile Based System For Main And Return Spine, Top Tile Finish 8 Mm Thick Mdf Covered With Fabric Of Approved Colour And One Writing Board (600 Mm W) And One Soft Board (600 Mm W) Per Workstation, Bottom Tile Finish 9 Mm Thick Laminate Tile Of Approved Colour, Raceway-One Mi-Dle Raceway (600 Mm W) Below Table Top Per Workstation And Continuous Raceway At The Skirting Level, Wire Manager-Abs Plastic Gommet One Number Per Table, Table Top-25 Mm Thick Plpb With Straight Table Top End Table 25 Mm Thick Plpb With Straightedge Bound Hardwate-M Powder Coated Corner Bkt, Cantilever Bkt, Separator Hook On Bkt, J Bkt And Table Joint Plate, As Per Specifications, Drawings And As Directed By Engineer In Charge 2A) Size: 1200 Mmw X 600 Mm D X 1200 Mm Ht - (Sharing Work Station With Edge Binding Table Top, Back To Back (Set Of 2) As Per Engineer Incharge.,F. Providing And Placing Conference Table-12+1+1 Seater:Suprit 12 Seater Oval Meeting Table With Table Top Of Commercial Block Board Bwp Grade With Wire Management And Sockets Conforming To Is 1659 As Per Engineer Incharge.(Gem Specification Attached),G. Chairs : Supply Of Office/Visitors Chairs With Seat D X W X H 450 Mm 470 Mm 460 Padded With Polyurethane Foam As Per Engineer Incharge. (Gem Specifications Attached)
