Military Engineer Services-MES has published Tender For Repair Maintenance Of Street Lights Security Light Cables Poles Allied Works And Ac Plant And Connected Items In Mh Signal Centre Of Danapur Under Ge Danapur Cantt. Submission Date for this Tender is 21-03-2023. Street Lighting Tenders in danapur Bihar. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Mar-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-03-2023 |
| 2 | 16-Mar-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-03-2023 |
| Sl. No. | Item Description |
| 1 | Disconnecting and taking down existing any type street /security light fitting of any make or any capacity for repair or replacement of unserviceable accessories such as ballast, holder, acrlic cover, cable, LED driver & FTL rod etc. through ladder / motorised / manual system from GI bracket on pole of any size and refixing the same after cleaning, general overhauling, repairing and making serviceable and refixed the same in same location or any other location and testing complete all as directed. Note:- (a)Contractor should have to recevied complaint through day to day basic from MES Power House. (b)Spare parts required for repair shall be measured and paid separately as under this BOQ. (c)The cost of transportation, ladder etc shall be born by the contractor. |
| 2 | Carrying out repairs, in position, to defective street light fittings of any description and type fitted on any height of poles/ walls of buildings complete and making the fitting serviceable by replacing the unserviceable spares/ fittings for satisfactory functioning all as specified and as directed. Note :- (a) Contractor should have to recevied complaint through day to day basic from MES Power House. (b) Spare parts will be measured and paid seperetly as under this BoQ. |
| 3 | Supply only surge Protection device (SPD) 10 KV 240 volts water seal type suitable for LED industrial and outdoor street/security light fitting upto 75 watt complete all as specified and directed. Make: Bajaj/Crompton Geaves/HPL. |
| 4 | Supply only surge Protection device (SPD) 5 KV 240 volts water seal type suitable for LED industrial and outdoor street/security light fitting above 75 watt and upto 150 watt complete all as specified and directed. Make: Bajaj/Crompton Geaves/HPL. |
| 5 | Supply only LED outdoor divers of capacity 25/30 Watt 240 volts suitable for outdoor street/security light including all necessary fixing accessories complete as per site existing make and model of light fitting complete all as specified and directed. Make: Bajaj/Crompton Greaves/HPL/Havells. |
| 6 | Supply only LED outdoor divers of capacity 40/45 Watt 240 volts suitable for outdoor street/security light including all necessary fixing accessories complete as per site existing make and model of light fitting complete all as specified and directed. Make: Bajaj/Crompton Greaves/HPL/Havells. |
| 7 | Supply only LED outdoor divers of capacity 60/72/75/80 Watt 240 volts suitable for outdoor street/security light including all necessary fixing accessories complete as per site existing make and model of light fitting complete all as specified and directed. Make: Bajaj/Crompton Greaves/HPL/Havells. |
| 8 | Supply only LED outdoor divers of capacity 100/120 Watt 240 volts suitable for outdoor street/security light including all necessary fixing accessories complete as per site existing make and model of light fitting complete all as specified and directed. Make: Bajaj/Crompton Greaves/HPL/Havells. |
| 9 | Taking down old unserviceable convetional street light fittings/ post top lantren/ bollards etc of any type/modelincluding associated accessories from 8.5/9 mtr pole/Top of the building/ other similar situation and keep in safe costudy in MES yard complete all as specified and directed. |
| 10 | Supply and fixing LED light fitting for street/security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 36 Watt (+/- 3 watt) 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe light grade bracket including three years on site warranty from manufacturer including taking downold unserviceable light fittings complete all as specified and directed. Make: Bajaj, Cat No: BRTFG 36W LED V2 / Crompton Greaves, Cat No: LSTS-36-CDL-M |
| 11 | Supply and fixing LED light fitting for street/security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with toughened glass and individual high power LED with secondary optics of capacity 45 Watt 240 volts AC 50 Hz , IP 66 protection suitable for 40 mm dia GI pipe light grade bracket including three years on site warranty from manufacturerincluding taking downold unserviceable light fittings complete all as specified and directed. Make: Bajaj, Cat No: BRTFG 45W LED I / Crompton Greaves, Cat No: LSTP-45-CDL-M/ HPL , Cat No: HPLLEDSL4560S |
| 12 | Supply and fixing LED light fitting for street/security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with toughened glass and individual high power LED with secondary optics of capacity 60 Watt 240 volts AC 50 Hz , IP 66 protection suitable for 40 mm dia GI pipe light grade bracket including three years on site warranty from manufacturer including taking downold unserviceable light fittings complete all as specified and directed. Make: Bajaj, Cat No: BRTFG 60W LED V3 / Crompton Greaves, Cat No: LSTP-60-CDL-M/ HPL , Cat No: HPLLEDSL6060S |
| 13 | Supply and fixing LED light fitting for street/security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with toughened glass and individual high power LED with secondary optics of capacity 72 Watt 240 volts AC 50 Hz , IP 66 protection suitable for 40 mm dia GI pipe light grade bracket including three years on site warranty from manufacturer including taking down old unserviceable light fittings complete all as specified and directed. Make: Bajaj, Cat No: BRTFG 72W LED V3 / Crompton Greaves, Cat No: LSTP-72-CDL-M/ HPL, Cat No: HPLLEDSL7260S |
| 14 | Supply andfixingLED flood light luminaires 120 Watts IP 65 type with lens incl standard fittings pressure die cast aluminium housing with heat reistant toughened front glass housing with epoxy powder coated finsh and , complete with control gear box and all accessories duly prewired and connecting to junction box and testing including taking down old unserviceable light fittings complete all as specified and as directed.Make : Havell"s Cat No: JETAPROPLUSFL120WLED757LTG/ Bajaj Cat No: BJFL 120W LED I/ CG, Cat No: LFLN-120-CDL/60-M |
| 15 | Supply andfixingLED Post top light fittting luminaires 40 Watts IP 65 type made in die-cast aluminium housing with decorative opal polycarbonate diffuser complete with control gear box and all accessories duly prewired and connecting to junction box and testing including old unserviceable taking downlight fittings complete all as specified and as directed. Make : Bajaj, Cat No: BGCT W4 LED WW/ Crompton Greaves, Cat No: LPTO-40-CD/ Havells, Cat No:ORALPT25WLED757PSYMTOPC |
| 16 | Supply andfixingLED bollard 9/10 Watts IP 65 type pyramid top with robust design and efficient light distribution made in die-cast aluminium housing with decorative opal polycarbonate diffuser complete with control gear box and all accessories duly prewired and connecting to junction box and testing including taking downold unserviceable light fittings complete all as specified and as directed. Make : Bajaj Cat No: BGBOM 650 9W LED/ CG, Cat No: LBLTW-10-CDL/ Havells, Cat No: BAMBOOBL8WLED830SSYMTOPCM |
| 17 | Re-fixing old serviceable street light fittings of any type/modelincluding associated accessories to 8.5/9 mtr pole/Top of the building/ other similar situation complete all as specified and directed. |
| 18 | M & L for street light bracket made out of GI pipe light grade 40mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling of old unserviceable bracket complete all as specified and as directed. |
| 19 | Supply and fixing pole mounted junction box/bus bar chamber for loop connection of street light cable of size 295x195x100 mm with 4 nos cable terminals hydrograpic insulator fixed on pole steel/PCC with suitable two flat iron clamp 25x4mm with nuts and bolts (duly painted with two coats of aluminium paint over a coat of red oxide primer) and dismantling of old unserviceable box complete all as specified and as directed.Make: Sintex , Cat No: GS-JB-2817 or equivalent model of Hensel/Rittel. |
| 20 | Supply and fixing in reapir PVC Sheathed multi stranded unarmed copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) of size 1.5 Sqmm 3 Core (Nominal Area) from pole junction box to light fitting with suitable size copper cable lugs and connector all complete as specified and directed. Make : Plaza/Havells/Polycab. |
| 21 | S & Fin repair PVC insulated and sheathed (ISI marked) stranded alluminium conductor 4.0 Sqmm size, single core cable including all fixing arrangement complete all as specified and directed. |
| 22 | S & F in repair PVC insulated and sheathed (ISI marked) stranded alluminium conductor 4.0 Sqmm size, 2 core flat cable for street light connection from fitting connector to over head line including all fixing arrangement, complete all as specified and directed. |
| 23 | Supply ,fabrication, installation and testing of LT out door type factory made CPRI Approved ,feeder piller box of size 700mmX500mmX400mm (over all dimension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 40X40X5mm vertical legs frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming existing cable of any size drawing / digging out cable from loops in trenches inclusive of necessary excavation and earthwork as required and relaying the cables including the following fitment accessories all complete as specified and as directed. |
| 24 | Incoming (a) Copper strip busbar of size 25 x 5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends= 04 nos |
| 25 | (b)MCCB, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity, rating 63 Amps including all fixing accessories with both ends spreader links-01 No.(Make :- L& T/ Legrand/ Schneider |
| 26 | (c)Digital voltmeter of range (0-500) volts, flush mounting type of size 96mm x 96mm (4”x4”) square dial with selector switch – 01 No (Make : Legrand/L&T/Schneider). |
| 27 | (d)LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 Volts, AC - 01 Set (Set of three) (Make : Legrand/L&T/Schneider) |
| 28 | Outgoing (a) MCB Single Pole 32 Amps,240 volts, 10 KA breaking capacity C curve - 04 Nos Make :- Legrand/L&T/Schneider. |
| 29 | (b) Digital type time Switch 240 volts AC Single Phase, 01 Nos. Make :- L&T, Cat No AUTS02DIG00 or equivalent model of Legrand//Schneider. |
| 30 | (c) Power contractor 32 amps 3 Pole 415 Volts AC - 01 NoMake: L&T, Model: MNX40 Cat No:- CS94190 or equivalent model of Schneider/Siemens. |
| 31 | (d)Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No. |
| 32 | Supply and fixing LT UG cable straight through joint (epoxy compounded) PVC insulated steel armoured type suitable with aluminium conductor cable for 25 to 50 Sqmm 4 core cable all as directed. |
| 33 | M & L for one coat of synthetic enamel painting (ZEBRA pattern with alternate yellow and black colour) to street light steel poles of 9m long up to a height of 1.5m from the coping of pole and one coat of aluminium painting for the remaining portion of pole including necessary preparation of surfaces all as specified and as directed. |
| 34 | M & L for one coat of synthetic enamel painting (ZEBRA pattern with alternate yellow and black colour) to PSC street light poles of 9m long up to a height of 1.5m from the coping of pole and one coat distamper of existing shade for the remaining portion of pole including necessary preparation of surfaces fixed in repairsall as specified and as directed. |
| 35 | Supply and fix in repair 3 pole power Contactors MO type 12 Amps AC3 rating with 1 No +1NCAux contactsfixed in repairs all as specified and as directed.Make : L&T Cat No. CS94835or equivalent |
| 36 | Supply and fix in repair 3 pole power Contactors MO type 18 Amps AC3 rating with 1 NO +1NCAux contactsfixed in repairs all as specified and as directed.Make : L&T Cat No. CS94834or equivalent |
| 37 | Supply & fix spare contact kit for MO12/MO18 type contactors including taking out unserviceable contact kit all as directed. |
| 38 | Supply & fix programmable digital time switches with battery backup and current capacity 16 Amps with 1 changeover including takingout the unserviceable time switch all as directed. Make Legrand Type Alpharex or equivalent. |
| 39 | Supply and fixstreet light panel box 32 Amps, 3 pole, 230volts with contactor, Digital 24 hours timer , MCB TPN etc., including taking down old timer box complete all as directed. Make Indo AsianTL032DBO or equivalent. |
| 40 | Supply and fixing in repair MCB TPN 50 to 63 amps 10 KA, C-seriesincluding connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 41 | Supply and fixing in repair MCB SPN 5 to 40 amps 10 KA, C-seriesincluding connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 42 | Supply and fixing in repair MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity,"C" type including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 43 | Supply and fixing MCCB adjustable thermal magnetic release type, 4 poles, 415 Volts, Lcu = 100% Ics, 25 KA breaking capacity of rating 63 Amps including all fixing accessories with both ends spreader links and disconnecting and taking out old U/S MCCB complete all as directed. Make -Simence / Legrand / L&T. |
| 44 | M&L for taking out old unserviceable cable of any size , GI pipe protection, bricks including separating serviceable bricks & set aside and removing un-serviceable bricks from position allcomplete as specified and as directed. |
| 45 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 10 sqmm2 core with all fixing & connecting accessories such as aluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: HAVELLS/ POLYCAB/PLAZA) (NOTE: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this schedule "A" part). |
| 46 | ~Ditto~ all as per item 45.00 above but 16 Sqmm, 4 Core. |
| 47 | Laying only cable any sizes obtained from item No 44.00with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. |
| 48 | Supply and fixing of GI tubing, light grade, 40 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete. |
| 49 | Excavation in trenches in soft/loose soil n.exc 1.5M wide and n.exc 1.5M depth and getting out, including trimming the sides and forming bottom surface to required levels for laying cables complete all as specified. |
| 50 | Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed |
| 51 | Removing surplus excavated material (soil) to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete as directed. |
| 52 | M&L for bricks common burnt sub class B designation for protection of cable complete all as specified and as directed. |
| 53 | Laying only bricks obtained from item No. 44.00 for protection of UG cable complete all as specified and as directed. |
| 54 | Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. Note:-Thickness of sand shall be measured 18mm after punning of sand. |
| 55 | M & L forEarthing to OH/Sub stn with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth strip 32 x 6 mm galvanised iron strip dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth strip 32 x 6 mm protected by GI pipe 40mm dia light grade and connected to earth test point includingexcavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete. |
| 56 | M&L for cleaning of all condensor tubes of central/package AC plant by disconnecting the condensor from the system, cleaning by descaling pump of suitable capacity using descaling solution of Make:-MAIC / HIBIRD or Hydrochloric acid 20%, cleaning the system through cooling tower by using descaling solution, cleaning condensor tubes by nylon brushes & mild steel rods of suitable size and necessary pumping set and tools etc complete for smooth and proper functioning of plants of following cap of plant :-(Note:- T&P such as pumps, tube etc & descaling solution etc shall be arranged by the contractor at his own cost.) |
| 57 | 3x 7.5 TR Cap (ICU Plant MH). |
| 58 | 1x 5 TR Cap (OT, MH) |
| 59 | 2x 5 TR Cap (Signal centre) |
| 60 | M&L for Cleaning and Servicing of nozzles & motorof cooling tower of central/package AC plants completeof any acapcity, as and when required or directed by the Engineer in charge. |
| 61 | M&L for replacement of Oil Pressure Switch of model MP55 oras per exitingof AC Plantscomplete all as directed by Eng-in-Charge. Make INDFOS/Denfos |
| 62 | M&L for replacement of HP/LP cut out of as per exitingof AC Plantscomplete all as directed by Eng-in-Charge. Make INDFOS/Denfos |
| 63 | M&L for replacement of Liquid line solenoid valve(Electrically operated) of as per exitingof AC Plants complete all as directed by Eng-in-Charge. Make INDFOS/Denfos |
| 64 | M&L for replacement ofSuction pressure gauge 96 mm dia,range 30 to 150 PSI and testing complete all as directed by Eng-in-Charge. |
| 65 | M&L for replacement of Discharge pressure gauge 96mm dia, range 0 to 300 PSI and testing complete all as directed by Eng-in-Charge. |
| 66 | M&L for replacement ofOil pressure gauge 96 mm dia, range 0 to 150 PSI and testing complete all as directed by Eng-in-Charge. |
| 67 | M&L for replacement of Water pressure gauge 96 mm dia of suitable range and testing complete all as directed by Eng-in-Charge . |
| 68 | M&L for replacement ofContactors for 3 phase blower motor rating-25 Amp as directed by Eng-in-Charge and testing complete make L&T/BCH |
| 69 | M&L for replacement of Contactors for 3 phase compressor rating-35 Amps and testing completeall as directed by Eng-in-Charge. Make-L&T/BCH |
| 70 | M&L for replacement of O/L relay suitable for 35 Amps contactor completeall as directed by Eng-in-Charge. Make- L&T, Havells, BCH or equivalent. |
| 71 | M&L for replacement of O/L relay suitable for 25 Amps contactor completeall as directed by Eng-in-Charge. Make- L&T, Havells, BCH or equivalent. |
| 72 | M&L for replacement ofStart/Stop push button heavy duty type completeall as directed by Eng-in-Charge. |
| 73 | Supplying & fixing in repair including connecting and testing of 3 phase ,digital Voltmeter 0-500 Volt calibration square flush 96 mm, accuracy class 0.50,including necessary control wire of copper PVC insulatedcomplete all as specified and directed by Eng-in-Charge. |
| 74 | Supplying & fixing in repair including connecting and testing of 3 phase, digital Amperemeter 0-100 Amps with CTs calibration square flush 96 mm including necessary control wire of copper PVC insulatedcomplete all as specified and directed by Eng-in-Charge. |
| 75 | M&L for replacement of Ammeter range-0-30 Amps completeall as directed by Eng-in-Charge. |
| 76 | M&L for replacement ofCurrent transformer (CT) of ratio 30/5 and testing complete all as directed by Eng-in-Charge. |
| 77 | M&L for replacement ofCurrent transformer (CT) of ratio 100/5 and testing complete all as directed by Eng-in-Charge. |
| 78 | M&L for replacement of Voltmeter selector switch for (0-500 volts) voltmeter as per sample / existing complete all as directed by Eng-in-charge. |
| 79 | M&L for replacement of Ammeter selector switchas per sample,Ammeter existing complete all as directed by Eng-in-charge. |
| 80 | M&L for replacement ofSingle phase preventercompleteall as directed by Eng-in-Charge. Make-Minilec |
| 81 | M&L for replacement ofHeater strip 3.0 KW, ISI marked completeall as directed by Eng-in-Charge. |
| 82 | M&L for replacement ofHeater strip 2 KW, ISI marked completeall as directed by Eng-in-Charge. |
| 83 | M&L for replacement of Safety valve for condenser operating at 350 PSI as per sample completeall as directed by Eng-in-Charge. |
| 84 | M&L for charging of compressor oil N - 68 and testing complete all as directed by Eng-in-Charge. |
| 85 | M&L for chargingofRefrigerant R - 22 (Freon Gas) Gas cylinder sealedwith adaptor as per auth. dealer and testing complete all as directed by Eng-in-Charge. |
| 86 | M&L for replacement of Fan- belt as per sample / existingfor compressor motor (central AC) complete all as directed by Eng-in-Charge. |
| 87 | M&L for replacement of Fan- belt as per sample / existingfor blower motor (central AC) complete all as directed by Eng-in-Charge. |
| 88 | M&L for replacement of Fan- belt as per sample / existingfor blower motor (package AC) complete all as directed by Eng-in-Charge. |
| 89 | M&L for replacement of suitable size of Fine filter for blower section of package type AC, as persample complete all as directed by Eng-in-Charge. |
| 90 | M&L for replacement of Indicator assembly with bulb of suitable / existing size complete all as directed by Eng-in-Charge. |
| 91 | M&L for replacement of Thermostat of ISI marked complete all as directed by Eng-in-Charge. |
| 92 | M&L for replacement of Suction shut off valveas per existing complete all as directed by Eng-in-Charge. |
| 93 | M&L for replacement ofDischarge shut off (DSV) valve as per existing complete all as directed by Eng-in-Charge. |
| 94 | M&L for replacement ofLiquid line shut off (LLSV) valve as per existing complete all as directed by Eng-in-Charge. |
| 95 | M&L for flaring Copper pipe line ofsize 1/8" dia, length 15 cm with copper nut complete all as directed by Eng-in-Charge. |
| 96 | M&L for replacement of capillary tube made of copper size 5/8" dia complete all as directed by Eng-in-Charge. |
| 97 | S & F in repair Gun metal gate valve, ISI marked complete with iron wheel head,screwed both ends for iron pipe of following sizes complete all as specified and directed |
| 98 | 25 mm bore |
| 99 | 40 mm bore |
| 100 | 50 mm bore |
| 101 | S&F in repair On load change over Switch, 100 Amps, 4 pole, 415 Volts, front operated complete all as directed by Eng-in-Charge. |
| 102 | S&F in repair On load change over Switch, 63 Amps, 4 pole, 415 Volts, front operated complete all as directed by Eng-in-Charge. |
| 103 | M&L for replacement of block bearing of blower fan including balancing of blower fan for package type AC, complete all as directed by Eng-in-Charge. |
| 104 | M&L for replacement of block bearing of blower fan including balancing of blower fan for Central AC complete all as directed by Eng-in-Charge. |
| 105 | Dismantling burnt electric motor of capacity 2 HP, 3 phase 415 Volts, 50 cycle from booster/ Blower/ CT fan including cutting burnt coils, cleaning the slots and rewinding with and including super enamelled copper wire of existing size & gauge, re-insulating, two coats varnishing & heating, reassembling and commissioning & testing complete all as directed by Eng-in-charge. |
| 106 | Allas per item No 105 above but for 10 HP motor and ditto. |
| 107 | M&L for overhauling of booster pump of capacity 2HP including replacement of ball bearing, bushes, impeller, gland paking, water seal, nut, washers etc and testing complete all as directed by Eng-in-charge. |
| 108 | M&L for overhauling of booster pump of capacity 5 HP including replacement of ball bearing, bushes, impeller, gland paking, water seal, nut, washers etc and testing complete all as directed by Eng-in-charge. |
| 109 | M&L for overhauling of electric motor of capacity 1 to 2 HP including replacement of ball bearing, bushes, oiling, greasing, varnishing and reassembling and testing complete all as directed by Eng-in-charge. |
| 110 | M&L for overhauling of electric motor of capacity 5 HP including replacement of ball bearing, bushes, oiling, greasing, varnishing and reassembling and testing complete all as directed by Eng-in-charge. |
| 111 | M&L for overhauling of electric motor of capacity 10 HP including replacement of ball bearing, bushes, oiling, greasing, varnishing and reassembling and testing complete all as directed by Eng-in-charge. |
| 112 | Disconnecting all electrical wiring connections and removal of damaged/ unserviceable spares / parts and wiring with and including 1.0 sq mm multistranded copper wire and interlocking connections with suitable size lugs,connectors including marking numbers, cable tie, nut bolts, screws & making provn for single phase preventer & systematically controlled with all safety provisions of LT electric control panel board, testing and commissioning for central type A/C plant complete all as directed by Eng-in-charge. Make of wire-Havells |
| 113 | Decsription allas per item No. 112 above but for package type AC plant and ditto. |
| 114 | M&L for charging of nitrogen gas in central typle AC plant upto 150 PSI fortesting of leakage and then vaccumnizing the same in duration three month complete all as directed by Eng-in-charge. |
| 115 | Taking out open type compressor model SMC 2/65, 7.5 ton capacitydismantling the compressor unit for complete servicing i.e oiling, cleaning and replacement of unserviceable sparesetc as required with necessary mechanism including commissioning & testing complete all as directed by Eng-in-charge. Note:- Spare parts shall bemeasured and paidseperataly under relevant item . |
| 116 | Suply only Linner Set complete all as specified and directed by Eng-in-charge. |
| 117 | Suply only Piston of model 265 complete all as specified and directed by Eng-in-charge. |
| 118 | Suply only Gazel pin complete all as specified and directed by Eng-in-charge. |
| 119 | Suply only ring set complete all as specified and directed by Eng-in-charge. |
| 120 | Suply only suctionreed, complete all as specified and directed by Eng-in-charge. |
| 121 | Suply only discharge reed, complete all as specified and directed by Eng-in-charge. |
| 122 | Suply only suction valve, complete all as specified and directed by Eng-in-charge. |
| 123 | Suply only dischargeVale, complete all as specified and directed by Eng-in-charge |
| 124 | Suply only connecting bearing, complete all as specified and directed by Eng-in-charge |
| 125 | Suply only connecting bush , complete all as specified and directed by Eng-in-charge. |
| 126 | Suply only Bronze Bush for crank shaft, complete all as specified and directed by Eng-in-charge. |
| 127 | Suply only packing seal, complete all as specified and directed by Eng-in-charge. |
| 128 | Suply only springs, complete all as specified and directed by Eng-in-charge. |
| 129 | Suply only sim washer, complete all as specified and directed by Eng-in-charge. |
| 130 | Suply only Loader frame,complete all as specified and directed by Eng-in-charge. |
| 131 | M&L for machine work/Leth work for Oil Pump including opening making serviceable in all recpect, oiling, greasing etc. and properlyrefixing including transportation complete all as directed by the engineer in charge. |
| 132 | M&L machine work/Leth work for andgrinding, remelting & finishing of crank shaft,with full overhauling making serviceable and re-assembling & transportation, fitting /fixing complete all as directed by the engineer in charge.. |
| 133 | M&L for replacement of MCCB 100 Amps, 4 pole, 25 KA and making all electrical connections & testing complete all as directed by Eng-in-charge. |
| 134 | M&L for replacement of MCB 40 Amps, 4 pole, 10 KA and making all electrical connections & testing complete all as directed by Eng-in-charge. |
| 135 | M&L for replacement of 4 pole Isolator, 63 Amps complete all as directed by Eng-in-charge.Make-Havells / Capital |
| 136 | M&L for oil seal of 7.5 Ton compressor complete all as directed by Eng-in-charge. Make- ACCEL |
| 137 | Taking out all filters of central type AC plant carefully and cleaning the filters and chamber (AHU)with the help of vaccum cleaner and fitting back all filters in duration complete all as directed by Eng-in-charge. |
| 138 | Description all as per item no 137 above but of package type AC plant. |
| 139 | M&L for replacement of humidity/dehumidity fier unit complete all as directed by Eng-in-charge. Make-Honey well |
| 140 | M&L for replacement of fresh air intake shutter of iron with closing /opening handle as per sample/existing complete all as directed by Eng-in-charge. |
| 141 | M&L for prepration of old painted surfaces steel/iron of any description over 10 cm in width or girth not otherwise described and two coat of painting with Aluminium paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 142 | M&L for spray painting to central AC Plants of following capacitycomprising of compressor, Motor frame & foundation, condenser all connected pipe lines in stranded colour code AHU unit panels boards & cooling tower etc with two coat of heat resistance paint of approved gradeandshade including lettering and numbering after carrying out necessary preparation of surface by emery paper all as specified and directed by EIC. |
| 143 | 3x7.5 TR capacity |
| 144 | 2x5 TR capacity |
| 145 | 1x5 TR capacity |
| 146 | M&L for replacement of nozzle/Sprinkler of coolling tower of centeral typeA/C plant 7.5 TR as per sample/existing type complete all as directed by Eng-in-charge. |
| 147 | M&L for replacement of nozzle/Sprinkler of coolling tower of Package typeA/C plant 5 TR as per sample/existing type complete all as directed by Eng-in-charge. |
| 148 | M & L in repair for Earth continuity conductor or main earthing lead of 32 x 6 mm galvanized iron strip, buried in ground or fixed to wall in repair complete all as specified and directed by Engr - in - Charge. |
| 149 | M & L for synthetic insulating rubber mat of size 2 m x 1m x 25 mm with ISI mark suitable for 11 KV rating in red colour complete all as specified and directed by Engr - in - Charge. |
| 150 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated,FRLSscreened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 70 sqmm 3.5 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this BoQ ). |
| 151 | All as per ser item No 150 above but of cross sectional area 50 sqmm 3.5 core. |
| 152 | All as per ser item No 150 above but of cross sectional area 25 sqmm 3.5 core. |
| 153 | Supply and errection FIRST AID BOX made out of alluminium of size 250 x 150 x 200 mm appxwith locking arrangement with lock complete as per specified and directed by Eng-in-charge. |
| 154 | Supply and fixingof GI tubing, light grade, 100 mm bore with all fitting laid in trenches / pole / wall for protection of cables in repairs complete.Make - TATA / ZINDAL / Bansal . |
| 155 | M & Lfor Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass complete all as specified and direct by Eng-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
