Military Engineer Services-MES has published Tender For Provision Of Security Cabin For Armoury At Aftc Jalahalli Bangalore. Submission Date for this Tender is 07-03-2023. Furnitures Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-03-2023 |
| Sl. No. | Item Description |
| 1 | Sch "A" Part I (B/ R Works) |
| 2 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation etc or for shafts, manholes etcn exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/dense soil all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick, all as specified and directed. |
| 4 | Removing excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed all as specified and directed. |
| 5 | Spreading and levelling of soilin layers n exc. 25 cm thick, well ramming including watering all as specified and directed. |
| 6 | Material and labour for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 7 | Material and labour for Cement concrete in foundations, filling and mass concrete Type D2 1:4:8 (using 40 mm graded aggregate) all as specified and directed. |
| 8 | Material and labour forreinforced cement concrete M25 nominal mix(using 20 mm graded aggregate) forfoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; all as specified and directed. |
| 9 | Material and labour forreinforced cement concrete M25 nominal mix(using 20 mm graded aggregate) for columns, pillars, piers, posts and struts all as specified and directed. |
| 10 | Material and labour forreinforced cement concrete M25 nominal mix(using 20 mm graded aggregate) for beams, cantilevers, bressumers, lintels over 1.50 m spanall as specified and directed. |
| 11 | Material and labour forreinforced cement concrete M25 nominal mix(using 20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconys, canopies, deck slabs and shelves and the like all as specified and directed |
| 12 | Material and labour for pre-cast cement concrete block masonry with solid blocks Type C2 1:3:6 (using 20 mm graded aggregate), exc.10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 13 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter square rectangular or polygonal rough finished surfaces of concrete all as specified and directed |
| 14 | Use and waste of formworkfor columns, pillars, piers, posts and struts square rectangular or polygonal fair finished surfaces of concrete all as specified and directed. |
| 15 | Use and waste of formworkfor beams, cantilevers, bressumers, lintels over 1.50 m span square rectangular or polygonal fair finished surfaces of concrete all as specified and directed. |
| 16 | Use and waste of formworkfor Slabs supported on walls, beams and columns in floors, roofs, landings, balconys, canopies, deck slabs and shelves and similar works not exceeding 200 mm thick horizontal or sloping square rectangular or polygonal fair finished surfaces of concrete all as specified and directed. |
| 17 | Supply and fix mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 18 | Supply and fix mild steel bars TMT 5 mm dia and over upto and including 10 mm dia in stirrups , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 19 | Supply and fix mild steel bars TMT6 mm to 8 mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 20 | Supply and fix Powder coated aluminium door shutters including frame, aluminium section weighing 0.55 kg/Sqm including half glazing with 4 mm thick glass and half portion covered with 12 mm thick prelaminated particle board and necessary joining cleats, glazing clips, handles, locking arrangements etc. completeall as specified and directed. |
| 21 | Supply and fix Powder coated aluminium window shutters two track frame, including shutters and 4 mm thick plain glass , aluminium sections weighing 0.55 kg/Sqm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) and Aluminium powder coated grill completeall as specified and directed. |
| 22 | Material and labour for applying oil bound bituminous primer @ 0.20 Kg / Sqm and providing 3 mm thick APP modified water proofingmembrane minimum weighing not less than 3kg/Sqm and reinforced with non-woven polyester matt (wt. not less than 150 gms/Sqm) by torch application with minimum 10 cm side over lap and 15 cm end over lap and treated with a coat of solar reflective bituminous aluminium paint @ 0.10 Kg / Sqmcompleteall as specified and directed. |
| 23 | Material and labour for water proofing plaster to roof slab 10 mm thickin cement mortar 1:4 mixed with water proofing compound as per manufacturers instructionall as specified and directed. Note : Water proofing compound shall be measured and paid separately as Supply only. |
| 24 | Material and labour for Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) 75 mm the as in plinth protection including joints and mastic filling all as specified and directed. |
| 25 | Material and labour for Cement concrete type C- 1, 1:3:6 (20mm graded aggregate) 100 mm the as in ramp including making impressions of expanded metal, whilst the concrete is green all as specified and directed. |
| 26 | Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including cement screed base 15 mm thick in CM 1:6 all as specified and directed. |
| 27 | Material and labour for Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) 75 mm thickas in sub base of floors all as specified and directed. |
| 28 | Material and labour for 18-20 mm thick polished sadarhalli grey stone slab in floor including cement screed base 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 29 | Material and labour for 18-20 mm thick polished sadarhalli grey stone slab in skirting over and including backing coat 10 mm thick cement mortar 1:4 fixed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 30 | Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement all as specified and directed. |
| 31 | Material and labour for rendering 15mm thick in two layers of 10 mm base coat and 5 mm finishing coatin CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement)mixed with water proofing compound as per manufacturers instructionall as specified and directed. Note: Water proofing compound shall be measured and paid separately as Supply only. |
| 32 | Supply only liquid waterproofing compound |
| 33 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm /lit and UV resistance as per IS : 15489: 2004, Alkali and fungal resistance, dirt resistance exterior paint of approved shade (Comply depot tinted) with silicon additives @ 1.43 lit / 10 Sqm and including priming coat of exterior primer applied @ 0.90 lit / 10 Sqm over new surface all as specified and directed. |
| 34 | Material and labour for preparing new plastered surfaces applying Clearcolle on plastered and other surfaces, preparatory to distempering and applying two coats of oil bound distemperall as specified and directed. |
| 35 | Sch "A" Part II (E/M Works) |
| 36 | Point wiring using approved colour coding as per IS with multi-stranded copper conductor1.5 Sq.mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI markedincluding heavy duty PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc,ISI markedincluding modular GI flush box 1.2 mm thick of suitable size with inner and outer white plastic plate (Same make of approved switch and socket)including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dollycomplete all as specified and directed at site for the following:- |
| 37 | One light / Ceiling Fan / exhaust fan point controlled by one 5 / 6 amps one way switch. |
| 38 | One Socket outlet, three/five pin, 5 Amp, independent controlled by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin. |
| 39 | Supply and fixModular switch 1 way 6 A,1 module 230 Volts,50Hz. |
| 40 | Supply and fix Modular switch 1 way 16 A, 1 module 230 Volts,50Hz. |
| 41 | Supply and fixModular Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz. |
| 42 | Supply and fix Modular Socket, 16A-2/3 pin combined 2 module 230 Volts,50Hz. |
| 43 | Supply and fix modular Fan step regulator, 120W-2 module 230 Volts,50Hz. |
| 44 | Supply and fixing Ceiling rose, three terminals, 230V (ISI marked) surface Bakelite suitable for batten fitting complete all as specified. |
| 45 | Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor2.5 Sq.mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLScable 1100 volts grade, ISI markedincluding heavy duty, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc,ISI marked including modular GI flush box 1.2 mm thick of suitable size with inner and outer white plastic plate (Same make of approved switch and socket) , including PVC insulated multi-stranded copper conductor 2.5 Sq.mm nominal cross sectional area single core FRLScable as earth continuity conductor to common earth and connecting to earth dollycomplete all as specified and directed at site for the one3/5 pin 15/16 amps socket outlet independent: |
| 46 | Supply and fixingceiling fan 1200mm sweep copper wound having minimum service value of 6.00, BEE five star rated with brushless DC(BLDC) motor and min air delivery 210CFM including fixing of down rod and connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 Sq.mm from ceiling rose/ connector to fan. |
| 47 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 48 | SupplySPN DB 4 way, double door IP 43 protection, with 200A rated busbar, earth terminationcomplete all as specified and directedbyEngr-in-Charge. |
| 49 | Supply and fixing SP5-32 Amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning. |
| 50 | Supply and fixing SPN 32 Amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) inthe MCB DB complete with connection testing and commissioning. |
| 51 | Supply, laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of sizes 10 Sqmm two core all as specified and directed. |
| 52 | Material and labour for cutting road / foot path in a depth not more than 0.30 metre and width not less than 0.40 metre for laying pipe line and getting out and returning filling, well ramming in layers and making good and matching with the existing surface after laying of pipe all as specified and directed. |
| 53 | Supply and laying GI tubing light grade for encasing LT cables for mechanical protection, laid under plinths / floors / roads / paths / culverts or fixed on walls or concealed in walls or along the steel poles by means of M.S.F.I clamps with necessary bolts nuts and washers etc complete all as specifiedof size 40 mm |
| 54 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including all earth work, PCC chamber, RCC cover, salt, charcoal etc and testing on completion. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
