Irrigation Department has published Tender For Design, Manufacturing, Supply, Erection, Testing And Commissioning Of Vertical Turbine Pumps Of 45 Hp X 3 Nos. With Allied Electromechanical Equipments Etc For Damrencha Lift Irrigation Scheme, Taluka Aheri, Dist Gadchirol. Submission Date for this Tender is 02-03-2023. Passenger Lift Tenders in gadchiroli Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Vertical Turbine Pump (3 Nos): Design, manufacturing, supply, errection, trail running, performance test and commissioning of vertical turbine pump of approved make conforming to IS:1710(1989) having specified pump output under specified operating head coupled to HT/LT ,WITH motor of adeuate HP rating operating at suitable KV with flexible coupling, self water lubricated thrust bearings, discharge Tee with flanged end for connecting delivery pipe with all other standard accessories and saftey device etc..complete as per specification. 1.Pump HP- 45 HP 2.Discharge per pump – 0.0967m3/s 3. Max. Syn. RPM- 1500 4. Delivery pipe Dia. - 250mm 5.No. of max stage-single 6.Duty point Head- 23.29m 7.Pump Efficiency- 81% 8.Suitable lubrication system |
| 2 | Manufacturing,supplying,erecting,commissioning of Non-Return Valve with bypass arrangementDia. = 250 mm, P.N rating= 1 |
| 3 | Manufacturing,supplying,erecting,commissioning of Butterfly valve with electrical actuators and inbult starterwith bypass arrangementDia. =250 mm, P.N. rating = 1 |
| 4 | Manufacturing,supplying,erecting,commissioning of Kinetic air valveDia. =50 mm, P.N. rating= 1 |
| 5 | Manufacturing,supplying,erecting,commissioning of Delivery pipeDia. = 250 mm, Length =5 m for each pump, Total= 15 mtr , Wall thickness = 5 mm (Rate are taken as per rate analysis no.3) |
| 6 | Manufacturing,supplying,erecting,commissioning of Dismentaling Joints Dia. = 250 mm Wall thickness =5 mm |
| 7 | Manufacturing,supplying,erecting,commissioning of LT panel for above submersible pump motor sets . In sheet metal enclosure incorporating., ACB 3 nos.(3+ 1 B/C),MCCB-3 nos. (3 for motors + 1 spare),CT , MF meter, Ammeters, voltmeters, Selector switches, Phase indicating lamps , switch fuse unit with necessary material duly painted , type tested. |
| 8 | Manufacturing,supplying,erecting,commissioning of Capacitor 415 V, 3- phase, 50 Hz.Supplying and erecting bank of All Polypropylene condensors (APP type) with the standard capacities of 2,3,5,7, 10,12.5 and 15 kVAR units of P.F. correction for operation on 3 phase 50 cycles 400/440V. (+10%) with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.(for motors )15 KVAR - 1 Set |
| 9 | Manufacturing,supplying,erecting,commissioning ofAuto transformer Starter- 3 Nos.(3 + 1 Spare) for above motorwith air break contactor (Locally Fabricated ) Providing erecting and giving test and trial of Fully Automatic, Auto Transformer Starter with Air Break Contactor, assembled locally with contactors of approved make in 14 SWG sheet steel fabricated, floor mounted type cubical panel, suitable for operation on 380 - 440 Volts, 3 Phase, 50 Hz, fitted with accessories as below. The incoming and outgoing cable end boxes shall be on either sides of main panel. The cable entries from auto transformer shall be totally enclosed in sheet metal. The starter shall have screened louvers on both sides. 1) Oil immersed copper wound auto transformer with 50%,65%, and 80% tapping including first fill of oil. 2) All Air Break Contactors of AC 3 duty of suitable rating as mentioned. 3) Bimetallic overload relay. 4) Timer ON and OFF delay. 5) Master timer. 6) Ammeter with CTs and selector switch. 7) No Volt release. 8) Motor "ON", "OFF" and "TRIP" indication lamp. 9) Motor Protection Relay, solid state with protection CTs. 10) Thermostat with 1 NO + 1 NC for Oil temperature. 11) Door interlock switch with 1 NO + 1 NC. 12) Control fuse. Starter for Motor HP / Contactor Rating " Main/ Start/ Run". |
| 10 | Manufacturing,supplying,erecting,commissioning of cables- Preparation of Cable schedule,cable tray andsupply, installation and testing of Power, Control cables etc. complete. |
| 11 | Providing, erecting Hand Operated Circular or Rectangular Travelling Crane (Single Girder) 5M with "A" frame structure suitable for capacity as below with 6 m lift . |
| 12 | Earthing: Design,mfg,supply,errection,testing &commissioning ofearthing comprising of adequate Nos of earth stations, earth bars,& individual double earthing to all electrical equipments as per detailed specificatons with Galvanis.ed cast iron earth plate with G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required as per specification No size 75 x 75 x 0.6 cm complete with all materials, testing & recording the results as per specification. |
| 13 | Providing & supplying Tools required for running & maintenances as per list. |
| 14 | Water level Indicators-Design,Manufacture,Supply,erection,testing & commissioningof works & testing of water level indicators as per detailed specifications:Operating on 230 volts, 50 Hz, A.C. Supply Operating range of level = 20 mtr. min. (Rate are taken as per rate analysis no.10) |
| 15 | Fire ExtinguisherProviding Erecting Testing & Commisssioning ofFire extinguisher Assembly including Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity Cartridge type - 2 nos. conf. To IS 2878 /15683 ,shock proof leather Safety Shoes of Electrical grade of standard size as IS :11226, 14544 with coution board/name plate etc. |
| 16 | Testing, Commissioning, trials etc .after erection of aboveEquipments. |
| 17 | Operation and Maintanance of the complete equipments for one year after performance Guranteetests (Period Of 365 days (1 Year)havingOperation 180 days & 185 daysNon Working tentatively ) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
