|
| 1 | Non-Consumables ECE ITEMS |
| 2 | High pass filter, Low pass filter? Power Supply ±15V? Variable sine wavegenerator (10H to 10KHz)? Independent circuit for Active & Passive filter? Wood/ MS Box (Closed Type)? Input : 230V, AC |
| 3 | Amplitude Modulation & Demodulation Kit (With Source) ? Using Transistor ? Carrier Signal Generator - Sine 100KHz? Audio Frequency – 1KHz? Demodulation using Diode and Transistor ? Wood / MS Box (Closed Type)? Input : 230V, AC |
| 4 | PWM Generation & Detection kit (Pulse Width Modulation)? Power supply : ±5V? Carrier Signal Generator - Clock 8KHz? Modulating Signal Generator - Sine 1KHz, Variable amplitude? Independent circuit for modulation & demodulation? Wood / MS Box (Closed Type)? Input : 230V, AC |
| 5 | PPM Generation & Detection kit ? Power supply : ±5V? Carrier Signal Generator - Clock 8KHz? Modulating Signal Generator - Sine 1KHz, Variable amplitude? Independent circuit for modulation & demodulation? Wood / MS Box (Closed Type)? Input : 230V, AC |
| 6 | DC Regulated Power Supply? Line Regulation :0.1% for ±10% line variation? Load Variation :0.01% from no load to full load? Voltmeter (Digital):7 Segment 3 Digit Voltmeter? Ammeter(Digital):7 Segment 3 Digit Ammeter? Protection:Overload & Short circuit ? Indicator’s: Overload LED Indicator,? : Overload Buzzer Indicator.? Voltage control:Coarse& Fine (Voltage Setting)? Current control:Coarse (Current Setting) |
| 7 | Audio Signal Oscillator? Frequency Ranges:0.1 Hz to 1 MHz in 7 Decade ranges? Amplitude :0 - 20V PP ? Read Out :Digital frequency counter (LCD display)? Output impedance :600 ?? Input:230V AC ±10% 50 Hz? Output protected against short circuit |
| 8 | Construct and test the performance of Band pass filter? Power Supply +12V ? Variable sine wave generator (.1Hz to 10KHz)? Independent circuit for all filter (Passive)? Variable Resistors – 2Nos.? Wood / MS Box (Closed Type)? Input : 230V, AC |
| 9 | Construct and test the performance of series and shunt equalizers ? Power Supply +12V ? Variable sine wave generator (.1Hz to 10KHz)? Wood / MS Box (Closed Type)? Input : 230V, AC |
| 10 | Construct and test the performance of AM linear diode detector ? Using Transistor ? Carrier Signal Generator - Sine 100KHz? Audio Frequency – 1KHz? Demodulation using Diode and Transistor ? Wood / MS Box (Closed Type)? Input : 230V, AC |
| 11 | Moving Coil Microphone Characteristics Trainer kit? Sine Wave Signal Generator 1Khz.? Moving Coil Micro Phone? 360°unidirectional signal response output ? 8 Ohms Loud Speaker |
| 12 | Dynamic cone Loudspeaker Characteristics Trainer kit? Sine Wave Signal Generator 100Hz /1Khz.? Dynamic cone Loudspeaker ? 360°unidirectional signal response output ? dB meter,? 8 Ohms Loud Speaker |
| 13 | Universal Embedded Trainer kit? ADC and DAC? 8 Input switches, 8 Output LED and PWM? Real Time Clock ? 4 X 4 Matrix Keyboard and LCD? EPROM? Mailbox? Stepper Motor and Temperature Sensor (Without Motor & Power Amp.)? Buzzer, Relay? 7 Segment LED Display ? USB and Serial port |
| 14 | Stepper Motor Interface |
| 15 | IC Voltage Regulated Power Supply 0-5V / 1A? Bridge Rectifies Circuit ? Fixed Voltage Regulator (7805, 7812, 7905, 7912)? Variable Voltage Regulator (LM 317)? Wood / MSBox (Closed Type)? Filter circuit? Input : 230V, AC |
| 16 | Digital Oscilloscope-50MHzModel:SMO 502 ED ? Wave forms :Sine, Square ? Frequency Ranges:0.1 Hz to 1 MHz in 7 Decade ranges? Amplitude :0 - 20V PP ? Read Out :Digital frequency counter (LCD display)? Output impedance :600 ?? Input:230V AC ±10% 50 Hz? Output protected against short circuit |
| 17 | Digital IC TrainerModel: JEDT - 022 L ? Input:230V ±10% 50 Hz? Power supply:5V 2A, ±12V 500mA, ? Pulse Generator:100Hz to 1 KHz? Pulse :Pulse switches for providing? Logic H/L Pulse? Display:7 Segment BCD 1 Digit Decoder.? Logic Input:12 Logic input switches for ? ProvidedH/L Signal? Indicator:12 Logic status indicating LED? Connecting provision :BS2 socket with 15 Patch cords? Bread Board :1 NO? : Overload LED indicator and short circuit protection ? Cabinet :Closed type Wooden / MS Case |
| 18 | SCR Commutation Circuit • Power supply : 0-24V AC• 230/12-0-12V Isolation Transformer • 2Nos. of SCR for half, full AC Control circuit• Inbuilt Loading Resistive & firing circuit• Ramp & Pedestal Method• Zero crossing detector method• Wood / MS Box (Closed Type)• Input : 230V, AC |
| 19 | TRIAC Trainer Kit• Inbuilt 110V AC• Variable control circuit• Inbuilt 40W Lamp |
| 20 | PWM Chopper Kit-MOSFET Based• PWM:Generation inbuilt• Frequency :Variable • Step down• Input: 20 - 24V DC• Output : 5V DC (Variable)• Step up• Input: 12 to 15V DC• Output : 24V DC (Variable)• Inbuilt : R Load• Wood / MS Box (Closed Type)6600Input : 230V, AC |
| 21 | PWM Buck Converter Kit • Input : 20 to 24V DC • Output: 5V DC @ 1A• Protection: Fuse for output side with overload protection • Inbuilt : Variable Load |
| 22 | Delta PLC Trainer kit• 8 digital inputs and 6 digital outputs • +24V Power supply• Delta Professional Programming software• RS 232 Communication cable from PLC to system • Switch inputs and LED indication for simulating the inputs • LED indication in the outputs • Proper termination of inputs, outputs and power supplies • Wooden / Metal casing and detailed manual |
| 23 | Lift Control Interfacing module• 3 floors (Ground plus two floors) Plastic model • Floor request switches and Floor sensing switches • Cabin - stepper motor with controller with forward and reverse control • Proper termination to wire inputs and outputs |
| 24 | Conveyor Interfacing control module • Input 230V DC• 1 No. of Proximity Sensors • 1 No. AC Servo Motor 60 RPM• PLC input and output terminals |
| 25 | IGBT Trainer kit• 0-30V/500mA DC variable isolated power source 2nos.• Current control pot• IGBT characteristics circuit• Patch chords• Closed type wooden / MS box |
| 26 | MOSFET Trainer kit • 0-30V/500mA DC variable isolated power source 2nos.• MOSFET characteristics circuit• Patch chords• Closed type wooden / MS box |
| 27 | Half wave Rectifier using MOSFET Trainer kit• 0 to 15V AC Source• Power Circuit• Trigger circuit |
| 28 | Single phase Half and Full Controlled Bridge with R load experiment trainer kit• Input 230V AC • Power Supply 0-24V/2A AC• Inbuilt firing circuit• Inbuilt power circuit |
| 29 | Single phase Parallel Inverter using MOSFET / IGBT experiment trainer kit• Input 230V DC• Power Supply24V DC• Inverter selection switch for single pulse and multiple pulse • Sinewave 40 to 60Hz variable• Triangle 10KHz to 20KHz variable amplitude and frequency• Inbuilt firing circuit• Inbuilt power circuit• Inbuilt R Load, RL Load |
| 30 | Step down and step up MOSFET based chopper• +24V DC power source• 10-15V DC variable power source• 20-24V DC variable power sources• PWM control circuit with PWM frequency 4 duty cycle control• MOSFET based step up chopper circuit • MOSFET based step down chopper circuit• Closed type wooden / MS box |
| 31 | Fan regulator using TRIAC and DIAC Trainer kit • Inbuilt 230V AC• Variable control circuit• Fan Motor |
