Tender For Smart Tb Centre Cum Labour Room At Maharani Laxmi Bai Medical College Jhansi.
Tender Value
5.24 Crore
Estimated cost
Bid Submission
01 Mar 2023
0 days left
EMD
28.20 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jhansi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Smart Tb Centre Cum Labour Room At Maharani Laxmi Bai Medical College Jhansi.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Feb-2023 | Due Date Extended - (28-02-2023) | Admin Corrigendum Date Extend | 01-Mar-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Name of Work: Smart TB Centre Cum labour Room at Maharani Laxmi bai Medical College Jhansi.Note :-(1)-GST Excluded on the aforesaid work. |
| 2 | LABOUR ROOMPART-A (Civil work)EARTH WORKExcavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sidrs of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer- in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.(Rate is Including Royality) Ref No. 251 |
| 3 | Earth work in Cutting or Filiing in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20\") in depth and earthwork in embankment to be in 20 cm(8\") layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (Sfts) lifts and 30 m. (100’) lead. The earth from cutting to be used in making filling or to be deposited as spoil banks within 30 metres (100 fts) distance as directed by Engineer-in- charge. (Rate is Including Royality) Ref No. 253 |
| 4 | Sand filling In plinth including suppty of necessary quantity of sand from a distance not exceeding 8 km.(5 miles) from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. (Rate is Including Royality) Ref No. 255 |
| 5 | Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Ref No. 0 |
| 6 | CONCRETE WORKConcrete with 4 cm(1.5\") gauge brick ballast fine local sand of1.25 Fineness modulous and cement in Proportion of 12:6:1 infoundation and under floors including supply of all materials labour and T&P etc. required for proper completion of the work Ref NO. 273As in item (273) above but in the_proportion of 10:5:1 Ref No. 274 |
| 7 | Cast cement concrete door sills, chaukhats boundry posts, shelves and similar small work with cement, approved coarse sand and 2 cm. (314\") gauge approved stone ballastin the proportion of 1 : 2 :4 , excluding supply ofreinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire, and including the cost of binding wire, moulds and all other materials,labourandT&Petcrequired for proper Completion of the work. Ref No. 282 |
| 8 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Ref No. 4.17 |
| 9 | REINFORCEDCEMENTCONCRETESteel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.dsr-5.22Thermo-Mechanically Treated bars of grade Fe-500D or more.dsr-5.22.6 |
| 10 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.dsr-5.3 |
| 11 | R.C.0 work with cement approved coarse sand and 2 cm. ,(3/4\") gauge approved stone ballast in the proportion of11:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and (binding the same with 24 B.W.G.G.I binding wire andlincluding necessary centering and shuttering etc. and also including supply of all materials, labour& T&P etc . required forproper completion of the work. Binding w ire cost being_included in the item.Ref No. 283(1)As in item 283(1) above but in RCC at foundation and footing with 4 cm 1.5\" gauge approved stone ballast Ref No. 287(1) |
| 12 | As in item 283(1) above but in RCC T beam and slab foofs and RCC ColumnsRef No. 288(1) |
| 13 | BRICK WORK6First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T & P etc required for proper completion of the work Ref No. 303Cement mortar 1:6 (1 cement : 6 fine sand) |
| 14 | As in item (301 to 304) above but in superstructure. Including necessary cutting and moulding of bricks as requiered and also including honey comb brick work, thickness of wall not to be less than 1.5 brick thick. Add extra labour to above item no. 301 to 304. Ref No. 309Cement mortar 1:6 (1 cement : 6 fine sand) |
| 15 | As in item (309) above but for wall of half brick (4 1/2\") thick. Add for extra labour over item No. 310. Ref No. 310(a)Cement mortar 1:6 (1 cement :6 fine sand) |
| 16 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.dsr-6.15 |
| 17 | Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).dsr-6.44 |
| 18 | MARBLE WORKProviding and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.dsr-8.2Granite of any colour and shadedsr-8.2.2Area of slab over 0.50 sqmdsr-8.2.2.2 |
| 19 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.dsr-8.3Granite workdsr-8.3.2 |
| 20 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.dsr-8.4 |
| 21 | WOOD WORK & PVC WORK9Additional cost for fixing glass panes with C.P. Teak wood beading and felt as directed by Engieer-in-charge Instead of putty and brad including cost of all materials, labour and T & Petc. required for proper completion of the work Ref No. 410 |
| 22 | As in item 470 but of C P. Teak decorative type (one side only) and commercial lipping approved ply wood flush shutters 4 cm(1 /2\") thick. As in item 470 but of C P. Teak decorative type (one side only) and commercial lipping approved ply wood flush shutters 4 cm. (1 1/2\") thick. Ref No. 477 |
| 23 | As in item 478 but with Teak lipping single leaf door. Add extra to item 478 Ref No. 479 |
| 24 | Supply and fixing of 4 cm (1 1/2\") thick C. P. Teak wood door and window shutters with panels of heavy quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm.(1/10 or 1/12 or 1/6 inch) mesh or any other size with necessary beading, including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinges bolts, locks, handles, spring and/or other fittings but excluding their supply and including two coats of black Japan on all iron fittings, if necessary. (Fittings with necessary screws to be supplied departmentally). Ref No. 450 |
| 25 | Supply of M.S. Grill of a approved quality and drawing made of flat iron not bigger then 20x4 mm size including supply of materials, fabrication, labour, T&P and also one coat of red oxide paint complete in all respect as per direction of Engineer-in- charge for proper completion of work at site. Ref No. 3 |
| 26 | Supplying and fixing galvanised Mosquitos proof,heavy quality Iron wire gauge or expanded metal ef heavy quality over windows and including supply and fixing of C. P. Teak wood battens 8 cm X 1 cm (3\"x3/8\") and including supply of necessary screws, all materials, labour and T&P etc. required for proper completion of the work, Ref No. 455 |
| 27 | STEEL WORKProviding and fixing 1 mm. thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6 mm. (1 1/2\"x1 1/2\"x1/4\") angle iron, 3.15 mm. (1/8\") gusset plates at the junctions & corners, hooks at top, 25 mm. (1\"), dia. pulleys at bottom, 40 X 40 x 6 mm.(1 1/2\"x1 1/2\"x1/4\") angles & T iron guides at top & bottom respectively includiug locking arrangement with handles, etc. complete and applying one priming coat of approved lead paint. Ref No. 519 |
| 28 | Supply of Approved M.S. Z-section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt, hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work Ref No. 1 |
| 29 | Supply of M.S. Angle iron door, windows ventilation frame made of approved M.S. angle iron wroght to required form including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work. Ref No. 2 |
| 30 | Mild steel or iron work of small Sizes and Sections such as holding down bolts, hold fasts, tie, rods, gratings etc. (when not included in an over all rates) wrought to required form, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work. Ref No. 502 |
| 31 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :dsr-10.34.0 mm thick glass panesdsr-10.30.1 |
| 32 | FLOORINGKota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : Ref No. 14.4325 mm thick. |
| 33 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Ref No. 14.43 |
| 34 | Supply and fixing 5 mm thick China white glazed tiles So in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work. (size of tiles upto 200 x 300 mm) Ref No. 628 |
| 35 | Supply and fixing 5 mm thick China white glazed tiles So in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work. (size of tiles upto 200 x 300 mm) Ref No. 628 |
| 36 | Providing & Laying of 8 to 10 mm thick ivory or light Sqm shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement: 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work. Ref No. 14.43Size of Tile 600x600 mm |
| 37 | Providing & Laying of 8 to 10 mm thick ivory or light Sqm shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement: 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work. Ref No. New item no 2Size of Tile 600x600 mm |
| 38 | ROOFINGMaking khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.dsr-12.22 |
| 39 | FINISHING12 mm Cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extral for mixing any additive Ref No. 17.581:3 (1 cement: 3 coarse sand) |
| 40 | 15 mm Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm. In girth and finished even and smooth. Ref No. 17.591:3 (1 cement: 3 coarse sand) |
| 41 | 6mm cement plaster of mixdsr-13.161:3 (1 cement : 3 fine sand)13.16.1 |
| 42 | White washing one supply of all Sqm.materials,labour and T&P etc. required for proper completion of the work. Ref No. 671As in item No. 671 above but 3 coats white washing 2 coats as per item 672. Ref No. 673 |
| 43 | One priming coat & one coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work. Ref No. 649 |
| 44 | Finishing walls with water proofing cement paint of Sqm approved make and quality on new work with two coat to give to give an even shade. Including supply of all material, labour and T&P etc. required for proper completion of the work. Ref No. 660 |
| 45 | Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the 1.S.I.No. 103 1950 Ref No. 641Primer Wood Work |
| 46 | Primer Steel Work |
| 47 | Painting roofs or other iron work in large area with one coat of ready mixed paint priming one coat of approved paint (British ANTISOL) including supply of all materials, labour & T&P etc. required for proper completion of the work. Paint to be used should confirm LSI.No. 103-1950. Cost for area of 650 Sft. Priming Coat Ref No. 644Two or more coats on new work |
| 48 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :dsr-13.65Two or more coats on new workdsr-13.65.1 |
| 49 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. dsr-13.80 |
| 50 | WATER PROOFINGProviding & Laying \"brick bat coba\" 100 mm thick laid with M-S 150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonry coba with top finishing plaster mixing with acetic water proofing compound @ 2% by weight & Including supply of all materials labour T&P etc required for proper completion of worksNew item-1 |
| 51 | Supply & filling of cinder in sunken portion of building including breaking into required sizes including supply of all material, labour, T&P required sizes including supply of al material, labour. T&P required for proper completion of work |
| 52 | External Elevation |
| 53 | PART-B PLUMBING WORK (SANITARY WORKS)EARTH WORKExcavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Ref. No2.1All kinds of soil Ref. No2.10.1Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Ref. No2.10.1.2 |
| 54 | ROOFINGProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Ref. No12.41110 mm diameter Ref. No12.41.2 |
| 55 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Ref. No12.42CouplerRef. No12.42.1110 mmRef. No12.42.1.2 |
| 56 | Bend 87.5° Ref. No12.42.5110 mm bend Ref. No12.42.5.2 |
| 57 | Shoe (Plain) Ref. No12.42.6110 mm Shoe Ref. No12.42.6.2 |
| 58 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. Ref. No12.43110 mm Ref. No12.43.2 |
| 59 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Ref. No12.44 |
| 60 | SANITARY INSTALLATIONSProviding and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Ref. No17.3W.C. pan with ISI marked black solid plastic seat and lid Ref. No17.3.2 |
| 61 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Ref. No17.7White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Ref. No17.7.4 |
| 62 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Ref. No17.1Kitchen sink with drain board Ref. No17.10.1510x1040 mm bowl depth 250 mm Ref. No17.10.1.1 |
| 63 | Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Ref. No17.16 |
| 64 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Ref. No17.31 |
| 65 | Providing and fixing toilet paper holder : Ref. No17. 34Vitreous china Ref. No17.34.2 |
| 66 | Providing and fixing soil, waste and vent pipes : Ref. No17. 35100 mm dia. Ref. No17.35.1Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Ref. No17.35.1.2 |
| 67 | 75mm diameter Ref. No17.35.2Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Ref. No17.35.2.2 |
| 68 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :Ref. No17. 37For 100 mm dia. pipeRef. No17.37.1 |
| 69 | For 75 mm dia. pipe Ref. No17.37.2 |
| 70 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Ref. No17. 38100 mmRef. No17.38.1Sand cast iron S&S as per IS - 3989 Ref. No17.38.1.2 |
| 71 | 75 mmRef. No17.38.2Sand cast iron S&S as per IS- 3989 Ref. No17.38.2.2 |
| 72 | Providing and fixing plain bend of required degree. Ref. No17. 39100 mm Ref. No17.39.1Sand cast iron S&S as per IS : 3989 Ref. No17.39.1.2 |
| 73 | 75 mm Ref. No17.39.2Sand cast iron S&S as per IS - 3989 Ref. No17.39.2.2 |
| 74 | Providing and fixing heel rest sanitary bend Ref. No17. 40100 mmdia Ref. No17.40.1Sand cast iron S&S as per IS - 3989 Ref. No17.40.1.2 |
| 75 | 75 mm dia Ref. No17.40.2Sand cast iron S&S as per IS - 3989 Ref. No17.40.2.2 |
| 76 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick,bolts and nuts complete.Ref. No17. 43100x100x100mm Ref. No17.43.1Sand cast iron S&S as per IS - 3989 Ref. No17.43.1.2 |
| 77 | 75x75x75mm Ref. No17.43.1Sand cast iron S&S as per IS - 3989 Ref. No17.43.2.2 |
| 78 | Providing and fixing single equal plain junction of required degree Ref. No17. 4475x75x75mm Ref. No17.44.2Sand cast iron S&S as per IS - 3989 Ref. No17.44.2.2 |
| 79 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : Ref. No17. 55100 mm Ref. No17.55.1Sand cast iron S&S as per IS - 3989 Ref. No17.55.1.2 |
| 80 | 75 mm Ref. No17.55.2Sand cast iron S&S as per IS - 3989 Ref. No17.55.2.2 |
| 81 | Providing and fixing terminal guard : Ref. No17. 56100 mm Ref. No17.56.1Sand cast iron S&S as per IS - 3989 Ref. No17.56.1.2 |
| 82 | 75 mm Ref. No17.56.2Sand cast iron S&S as per IS - 3989 Ref. No17.56.2.2 |
| 83 | Providing and fixing collar : Ref. No17. 57100 mm Ref. No17.57.1Sand cast iron S&S as per IS - 3989 Ref. No17.57.1.2 |
| 84 | 75 mm Ref. No17.57.2Sand cast iron S&S as per IS - 3989 Ref. No17.57.2.2 |
| 85 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : Ref. No17. 58100 mm Ref. No17.58.1 |
| 86 | 75 mm Ref. No17.58.2 |
| 87 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : Ref. No17. 59100 mm Ref. No17.59.1 |
| 88 | 75 mm Ref. No17.59.2 |
| 89 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : Ref. No17.61100 mm dia Ref. No17.61.1 |
| 90 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : Ref. No17.6575 mm diameter pipe Ref. No17.65.2 |
| 91 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Ref. No17.69Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms Ref. No17.69.2 |
| 92 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Ref. No17.7Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms Ref. No17.70.1 |
| 93 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Ref. No17. 71 |
| 94 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. Ref. No17.73600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Ref. No17.73.2 |
| 95 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Ref. No17.1Kitchen sink with drain board Ref. No17.10.1510x1040 mm bowl depth 250 mm Ref. No17.10.1.1 |
| 96 | Providing and fixing 8mm dia C.P / S.S Jet with flexible tube upto1 metre long with S.S triangular plate to Eureopean type W.C of quality and make as approved by engineer-in-charge.Ref. No17.16A |
| 97 | External work Providing and fixing G.I. pipes complete with G.I. fittings including trenching & refilling. Ref. No18.1232mmdia nominal bore Ref. No18.12.4 |
| 98 | 40mmdia nominal bore Ref. No18.12.5 |
| 99 | WATER SUPPLYProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Ref. No18.7Internal work - Exposed on wall20 mm nominal outer dia Pipes Ref. No18.7.2 |
| 100 | 25 mm nominal outer dia Pipes Ref. No18.7.3 |
| 101 | 32 mm nominal outer dia Pipes Ref. No18.7.4 |
| 102 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Ref. No18.8Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes Ref. No18.8.1 |
| 103 | 20 mm nominal outer dia Pipes Ref. No18.8.2 |
| 104 | 25 mm nominal outer dia Pipes Ref. No18.8.3 |
| 105 | 32 mm nominal outer dia Pipes Ref. No18.8.4 |
| 106 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : Ref. No18.1325 to 40 mm nominal bore Ref. No18.13.1 |
| 107 | Providing and fixing brass stop cock of approved quality : Ref. No18.1615 mm nominal bore Ref. No18.16.1 |
| 108 | 20 mm nominal bore Ref. No18.16.2 |
| 109 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : Ref. No18.1725mm nominal bore Ref. No18.17.1 |
| 110 | 32mm nominal bore Ref. No18.17.2 |
| 111 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : Ref. No18.1825 mm nominal bore Ref. No18.18.3 |
| 112 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : Ref. No18. 2025 mm nominal bore Ref. No18.20.3 |
| 113 | Providing and fixing uplasticised PVC connection pipe with brass unions : Ref. No18.2145 cm length Ref. No18.21.215 mm nominal bore Ref. No18.21.2.1 |
| 114 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : Ref. No18.22100 mm diameter Ref. No18.22.1 |
| 115 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ref. No18. 48Rectangular tank Ref. No18. 48B |
| 116 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : Ref. No18.4915 mm nominal bore Ref. No18.49.1 |
| 117 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. Ref. No18.5115 mm nominal bore Ref. No18.51.1 |
| 118 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Ref. No18.5215 mm nominal bore.Ref. No18.52.1 |
| 119 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Ref. No18. 5315 mm nominal bore Ref. No18.53.1 |
| 120 | Providing and fixing PTMT grating of approved quality and colour. Ref. No18.58Circular type. Ref. No18.58.1100 mm nominal dia. Ref. No18.58.1.1 |
| 121 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. Ref. No18. 77 |
| 122 | SEWARAGE & DRAINAGEProviding, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : Ref. No19.1100 mm diameterRef. No19.1.1 |
| 123 | 150 mm diameter Ref. No19.1.2 |
| 124 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : Ref. No19. 2100 mm diameter S.W. pipe Ref. No19.2.1 |
| 125 | 150 mm diameter S.W. pipe Ref. No19.2.2 |
| 126 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design: Ref. No19.4180 x 150 mm size P type Ref. No19.4.3With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Ref. No19.4.3.1 |
| 127 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Ref. No19.7Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :Ref. No19.7.1With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Ref. No19.7.1.1 |
| 128 | Extra for depth for manholes :Size 90x80 cm Ref. No19.8.1With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Ref. No19.8.1.1 |
| 129 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture\"s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Ref. No19. 16 |
| 130 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : Ref. No19.21For pipes 100 to 250 mm diameter Ref. No19.21.1 |
| 131 | Providing, laying and jointing non pressure NP2 class (light duty)RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Ref. No19.6150 mm dia RCC pipe Ref. No19.6.2 |
| 132 | 250 mm dia RCC pipe Ref. No19.6.3 |
| 133 | (PART-C) ELECTRICAL WORKWIRING IN STEEL AND PVC CONDUITWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.DSR 2022Sl. No. 1.3Group A Sl. No. 1.3.1 |
| 134 | Group B Sl. No. 1.3.2 |
| 135 | Group C Sl. No. 1.3.3 |
| 136 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.DSR 2022Sl. No. 1.5 |
| 137 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.DSR 2022Sl. No. 1.72 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Sl. No. 1.7.2 |
| 138 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Sl. No. 1.7.9 |
| 139 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Sl. No. 1.7.10 |
| 140 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Sl. No. 1.7.11 |
| 141 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.DSR 2022Sl. No. 1.182 Pair Sl. No. 1.18.2 |
| 142 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.DSR 2022Sl. No. 1.225 mm Sl. No. 1.20.2 |
| 143 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.DSR 2022Sl. No. 1.245/6 A switch Sl. No. 1.24.1 |
| 144 | 15/16 A switch Sl. No. 1.24.3 |
| 145 | 3 pin 5/6 A socket outlet Sl. No. 1.24.4 |
| 146 | 6 pin 15/16 A socket outlet Sl. No. 1.24.5 |
| 147 | Telephone socket outlet Sl. No. 1.24.6 |
| 148 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.DSR 2022Sl. No. 1.25 |
| 149 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.DSR 2022Sl. No. 1.26 |
| 150 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.DSR 2022Sl. No. 1.271 or 2 Module (75mmX75mm) Sl. No. 1.27.1 |
| 151 | 3 Module (100mmX75mm) Sl. No. 1.27.2 |
| 152 | 4 Module (125mmX75mm) Sl. No. 1.27.3 |
| 153 | 6 Module (200mmX75mm) Sl. No. 1.27.4 |
| 154 | 8 Module (125mmX125mm) Sl. No. 1.27.5 |
| 155 | 12 Module (200mmX150mm) Sl. No. 1.27.6 |
| 156 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.DSR 2022Sl. No. 1.33 |
| 157 | Installation,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.DSR 2022Sl. No. 1.35 |
| 158 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.DSR 2022Sl. No. 1.45 |
| 159 | Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.DSR 2022Sl. No. 1.49 |
| 160 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.DSR 2022Sl. No. 1.5Upto 450 mm sweep Sl. No. 1.50.1 |
| 161 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.DSR 2022Sl. No. 1.51 |
| 162 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.DSR 2022Sl. No. 1.54Group A Sl. No. 1.54.1 |
| 163 | Group B Sl. No. 1.54.2 |
| 164 | Group C Sl. No. 1.54.3 |
| 165 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required.DSR 2022Sl. No. 1.57 |
| 166 | Telephone cable, 0.5 mm solid annealed cu., jelly filledSupply installation, testing and commissioning of 0.5 mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filled with poly-al laminate moisture barrier, polythene sheathed, unarmoured polythene jacketed telephone cables as per DOT specifications of following sizesNSR10 Pair Sl. No. N1 |
| 167 | Telephone tag blockSupply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below:NSR10 Pair Sl. No. N2 |
| 168 | MCB DBs AND ACCESSORIESSupplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive ofV 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomeras required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)DSR 2022Sl. No. 2.58 way (4 + 24), Double door Sl. No. 2.5.2 |
| 169 | 12 way (4 + 36), Double door Sl. No. 2.5.3 |
| 170 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.DSR 2022Sl. No. 2.1Single Pole Sl. No. 2.10.1 |
| 171 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.DSR 2022Sl. No. 2.11 |
| 172 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.DSR 2022Sl. No. 2.1263 A Sl. No. 2.12.2 |
| 173 | Supplying and fixing following rating, four pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.2.1363 A Sl. No. 2.13.2 |
| 174 | 100 A Sl. No. 2.13.3 |
| 175 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.DSR 2022Sl. No. 2.25 |
| 176 | LIGHTING FIXTURES & FANSSupplying LED 18W Recess / Surface Mounting, CCT-6000K, CRI>70, PF>0.95,Downlighter complete as required of approved make.NSR N3 |
| 177 | Supplying LED 15W, CCT-6000K, CRI>70, PF>0.95, Mirror Light complete as required of approved make.NSR N6 |
| 178 | Supplying LED 20W, CCT-6000K, CRI>70, PF>0.95, Tube Light Fixture complete as required of approved make.NSR N7 |
| 179 | Supplying LED 43 W, CCT-6000K, CRI >70, PF>0.95, 2\"x2\" Size Panel Light Fixture complete as required of approved make.NSR N8 |
| 180 | Supplying Star rated double ball bearing capacitor start, aluminium body & blade 1200 mm Sweep 5 Star rated ceilingfan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor etc. complete as required of standard approved make.NSR N9 |
| 181 | Supplying Star rated High Air Throw 1300 ~ 1400 RPM single phase ISI marked 400 mm sweep (1300~1400 RPM) Wall Mountedfan with adjustable speeds in 5 steps by pull chord switch, etc. complete as required of standard approved make.NSR N10 |
| 182 | Supplying Heavy duty capacitor start, Double ball bearing900 / 1400 RPM single phase ISI marked 300 mm sweep (900/1400 RPM) Exhaustfan, IS:2312 markedetc. complete as required of standard approved make.NSR N11 |
| 183 | Supplying Iron and Aluminium Louver for Exhaust comple as reqyuired ofapproved make.NSR N12 |
| 184 | EARTHINGEarthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.DSR 2022Sl. No.5.4 |
| 185 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)DSR 2022Sl. No.5.9 |
| 186 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.DSR 2022Sl. No.5.11 |
| 187 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.DSR 2022Sl. No.5.15 |
| 188 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.DSR 2022Sl. No.5.16 |
| 189 | Intercom / EPABX SystemsSupply, installation, testing and commissioning of EPABX system consisting of 8 Nos. extensions complete as requiredof approved make.NSR N13 |
| 190 | PART-D FIRE FIGHTINGSub-Head (Fire Pumps & Accessories) ASupply, Erection, testing & Commissioning of electric motor driven automaticpump set consisting of the following as per specifications:(i) Horizontal mounted centrifugal type single stag fire pump for building pressure loss due to any leakage in the system and capable to deliver approx. 900 LPM against a total head of 40 Mtr. having cast iron body, bronze impeller , stainless steel shaft .(ii) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volt (+,- 10%) 3 Phase 50 Hz. AC Supply of suitable capacity for the above pump with Synchronous speed of 2900 rpm confirming to IS:325.(iii) Common base plate for mounting pump and motor fabricated of suitable MS channel and coupling, guard etc.900LPM 40 Mtr. Head |
| 191 | Design, manufacture, supply, storing, inspection, handling, assembling, installation in correct alignment, position, affecting proper connections, testing and commissioningof 14 SWG CRCA sheet steel fabricated cubical type Electrical Control Panel for fire fighting pumps floor mounting, dust & vermin proof, front operatedconstruction, enclosure class - IP 52. Completewith top/bottomremovable gland plates, as required, double compression type cableglands,earth bus, hinged and lockable doors. Complete with all inter connectionssmall wiring by min. 2.5 sq. mm. copper wires, ckt labels,The Copper Bus Bar shall be of suitable length, 200 Amp., 3 phase 50 Hz TPN, electrolytic copper. The panel shall be provided with interlocking arrangement between electric motor driven and diesel engine driven pumps.Provisions shall be made for providing potential free contacts to all pump starters for connection to building automation system / Fire alarm control panel. The fault withstanding capacity of panel shall be 35 KA rms for 1 sec.Following Fire fighting pumps shall have to be controlled - Incomer : 160 AMP FP MCCB with flush mounting square CT operated ammeter with selector switch, Voltmeter with selector switch, protective fuses and phase indicating lamps. Outgoings : 1 nos. 100 AMP TPN MCCB with star delta starter suitable for sprinkler pump with CT operated ammeter with selector switch and indication lamps for \"On\" \"Off\" and \"Trip\" mounted on the cubicle door. 2 nos. 63 AMP TP MCCB with star delta starter suitable for jockey pump with CT operated ammeter with selector switch and indication lamps for \"On\" \"Off\" and \"Trip\" mounted on the cubicle door. |
| 192 | Providing & fixing double flanged vertical air Pressure vessel fabricated form 8mm M.S. Plate with dished ends from 8mm M.S. Plate out side with one coat at primer and two coat of synthetic enamel paint of approved shade complete with approved qualityto operate at drop of pressure automatically at required pressure setting.Recommended Dia 150 MMWorking Pressure – 7 K.g/Sqcm.Test Pressure – 10 Kg/Sqcm |
| 193 | Providing, fixing of Pressure Gauge of required capacity as per fire fighting nobs.Pressure Test Gauge connects to any ¾ “ garden hose connection and is just the thing for quickly checking residential or commercial water systems for pressure problems. The PG150 Water System Pressure Test Gauge\"s re-settable maximum pressure hand stays at the water system’s highest pressure point during the test period. The Water System Pressure Test Gauges provide a quick indicator of any pressure spikes that might have occurred. |
| 194 | Providing and fixing, C.I. double flanged horizontal / vertical type Check valve NON return valve (NRV)including nuts, bolts 3 mm thick rubber insertions compete to IS : 5312 Part – 1 swing type classPN : 1-6.Providing, fixing of Pressure switch to operate of fire pump automatically on/off.Pressure switch is a form of switch that makes electrical contact when a certain set pressure has been reached on its input. This is used to provide on/off switching from a pneumatic or hydraulic source. The switch may be designed to make contact either on pressure rise or on pressure fall. |
| 195 | 100 mm Dia |
| 196 | Providing & fixing of butter fly valve suitable for pressure 15 kg/cm2 with flanges. Nut bolts and gasket complete as required.(PN : 1-6 type)Butterfly valve is a type of flow control device, typically used to regulate a fluid flowing through a section of pipe A flat circular plate is positioned in the center of the pipe. The plate has a rod through it connected to an actuator on the outside of the valve. Rotating the actuator turns the plate either parallel or perpendicular to the flow. Unlike a ball valve, the plate is always present within the flow, therefore a pressure drop is always induced in the flow regardless of valve position. butterfly valve is from a family of valves called quarter-turn valves. The \"butterfly\" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the process fluid. The valve may also be opened incrementally to regulate flow.100 mm Dia |
| 197 | Providing & fixing of CI \"Y\" type strainer flanged with SS 304 perforated screen.“Y” type including, nuts, bolts and 3mm thick rubber insertion complete.“Y” Strainer is rated for 640 psi (44.1 Bar) at 100°F (38°C). The “Y” Strainer provides economical strainer protection for piping equipment such as pumps, meters, valves, compressors, traps and similar equipment. The inlet and outlet ends are suitable for installation200 mm Dia |
| 198 | Providing & fixing of hand lever operated forged brass body full way ball valve type isolating valveHaving forged brass hard chrome plated mirror finish ball, steel handle with PVC grip, Teflon seat, screwed ends tested to a pressure of 15 kg/sqcm complete. 25 mm Dia |
| 199 | Providing & fixing air release valve with forged brass body full way ball valve Type isolating valve, flanges / union, suitable for sprinkler system with all necessary connections complete in all respects.25 mm Dia |
| 200 | forabove ground laying for hydrants and sprinkler system including transportation of materials up to the worksite, cutting the pipes to required length, edge preparation, welding, fixing / erection of pipes including specials i.e. bends, tees, reducers, flanges, expansion joints wherever required, washers, nuts, bolts etc. in proper position , anchor fastener and washer for hydrant / sprinkler piping, jointing by welding, aligning the pipe line, . Hydrostatic testing of system as specified, flushing & cleaning by water etc. complete as per drawings & direction of the Engineer-in-charge. 80 mm Dia |
| 201 | 100 mm Dia |
| 202 | With terminal joints by palm or pin typecable sockets (lugs), insulating with tapes, double compression type brass and nickel plated compression glands. On surface, the cable run shall be on MS cable trey or fixed on M.S. clamps etc.of suitable size or as directed by engineer-in- charge, complete in all respects. In ground the cable shall be laid at a depth of 750 mm from ground Level including a cushion of 75 mm thick. Fine river sand alround, duly protected by bricks on sides and top including excavation and back filling of soil or laid in RCC hume pipe as called for. The armouring shallbeproperly connected with the earth conductor by clampsetc.3 X 6sq.mmcopper armourd cable |
| 203 | 2 X 2.5 sq.mm CopperCable |
| 204 | Providing & Fixing of ISI marked SS single headed 63 mm dia.Hydrant Valve, 80 mm dia flanged inlet with 63 mm female instantaneous outlet confirming to IS : 5290-1977 on the fire wet riser/down comer. including making 80 NB pipe connection with riseralong with 100 mm dia dial pressure gauge of calibration 0-15 kg/sq cm, fixing the landing valves in proper positions, including supply of nuts, bolts, gaskets, caps, chains etc. testing the hydrant and completing the work in all respect as per directions of the Engineer-in-charge. |
| 205 | Providing & Fixing of RRL Hose pipe 63 mm dia and 15 meter long rubberized fabric lined one length including SS male - female instantaneous type coupling wounded complete conforming to IS:636-1988 type A.RRL Hose (Rubber Reinforced Lined) Specification: IS:636 Size : 63 mm x 15 mtr (or as per client requirement) of SS Male & Female 63 mm coupling ISI marked conforming to IS:903 Binded with GI wire. |
| 206 | Providing and fixing 63 mm dia instantaneous patterns SS branch shortpipe.16 mm dia nozzle conforming to IS : 903 suitable for inter connection to hose pipe coupling complete as required. |
| 207 | Providing & Fixing of 20 mm bore and 30 meter long hose (high pressure rubber braided hose pipe as per IS:444)Hose reel suitable for 10 kg/sqcm operating pressure for first aid fire fighting conforming to IS : 884, with 180o full swing drum, fixing brackets, shut off SS nozzle, 25 mm dia. hand lever operated isolating ball valve, connecting directly from the riser through25 mm dia. MS.pipe with sockets, elbows, nipples etc. including providing operating instructions on a metal plate and fixing it near hose reel. The system shall be complete in all respects as per drawings and directions of Engineer-in-charge. |
| 208 | Providing & fixing standard carbon steel fireman axe with rubber insulated handle tested to 20000 Volts. |
| 209 | Providing and fixing standard fire hose cabinet door frame (750 x 600 mm x 250 mm ) suitable to fit in the duct made of not less than 16 SWG MS sheethaving full fronted glass hinged door (5 mm thick clear glass) including necessary locking arrangement with handle as required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coats of fire red color). The door shall be fixed in the masonry wall or as required. The words \"FIRE HOSE\" to be painted on the box. |
| 210 | Providing & fixing of self glowing exit sign boards of size 10\"x 6\"printed made of luminescent safety rigid sheet in standard colour, photo luminescent sheet.made of crystals consisting mainly Zinc sulphide in protectition glass like shell, green and yellow crystal luminescent (glass in dark) by action of light. |
| 211 | Tank 5000ltrs |
| 212 | Assembly with 100 mm dia outlet suitable for local fire tender complete as required. |
| 213 | Providing & fixingof ABC Type Fire Extinguishers.4kgFeatures: It is very useful for extinguishing common types of fires which generally originate in workplaces or homes due to some accident or short circuit. They are highly effective against the fires caused by electrical short circuit as the ammonium phosphate contained in it is a bad conductor of electricity and hence eliminates the changes of electrocution. Compared to other ordinary fire extinguishers, they are effective when it comes to extinguishing fires by greasy materials like petroleum. Water fails to extinguish fires caused by fuels. The ABC Type fire extinguishers are far better than others as they are suitable for extinguishing Type A, Type B and Type C fires where as others can extinguish only one type of fire. |
| 214 | Providing & Fixing of Carbon Dioxide(CO2) Type Fire Extinguishers 4.5kgFeatures: Carbon dioxide extinguishers manufactured by us have quick flame suppression properties. These fire extinguishers are suitable for handling fires which involves inflammable liquids such as gasoline, oil, paints, varnishes and natural gases. These extinguishers have been effective used for extinguishing fires in machines. It is due to the fact, that these cut the supply of oxygen faster. |
| 215 | Providing & Fixing of Mechanical Foam Type Fire Extinguishers 50kg.Supply of Mechanical Foam. |
| 216 | Providing & Fixing of Carbon Dioxide(CO2) Type Fire Extinguishers 22.5kgFeatures: Carbon dioxide extinguishers manufactured by us have quick flame suppression properties. These fire extinguishers are suitable for handling fires which involves inflammable liquids such as gasoline, oil, paints, varnishes and natural gases. These extinguishers have been effective used for extinguishing fires in machines. It is due to the fact, that these cut the supply of oxygen faster. |
| 217 | Automation Electrical Control System |
| 218 | SMART TB HOSPITAL(PART-A) CIVIL WORKEARTH WORKExcavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sidrs of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer- in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.(Rate is Including Royality)Ref No.251 |
| 219 | Earth work in Cutting or Filiing in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20\") in depth and earthwork in embankment to be in 20 cm(8\") layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (Sfts) lifts and 30 m. (100’) lead. The earth from cutting to be used in making filling or to be deposited as spoil banks within 30 metres (100 fts) distance as directed by Engineer-in- charge. (Rate is Including Royality)Ref No.253 |
| 220 | Sand filling In plinth including suppty of necessary quantity of sand from a distance not exceeding 8 km.(5 miles) from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. (Rate is Including Royality)Ref No.255 |
| 221 | Supplying chemical emulsion in sealed containers including delivery as specified.Ref No.1Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 222 | CONCRETE WORKConcrete with 4 cm(1.5\") gauge brick ballast fine local sand of1.25 Fineness modulous and cement in Proportion of 12:6:1 infoundation and under floors including supply of all materials labour and T&P etc. required for proper completion of the workRef No.273As in item (273) above but in the_proportion of 10:5:1Ref No.274 |
| 223 | Cast cement concrete door sills, chaukhats boundry posts, shelves and similar small work with cement, approved coarse sand and 2 cm. (314\") gauge approved stone ballastin the proportion of 1 : 2 :4 , excluding supply ofreinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire, and including the cost of binding wire, moulds and all other materials,labourandT&Petcrequired for proper Completion of the work.Ref No.282 |
| 224 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.dsr-4.17 |
| 225 | Thermo-Mechanically Treated bars of grade Fe-500D or more.dsr-5.22.6 |
| 226 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.dsr-5.3 |
| 227 | R.C.0 work with cement approved coarse sand and 2 cm. ,(3/4\") gauge approved stone ballast in the proportion of11:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and (binding the same with 24 B.W.G.G.I binding wire andlincluding necessary centering and shuttering etc. and also including supply of all materials, labour& T&P etc . required forproper completion of the work. Binding w ire cost being_included in the item.Ref No.283(1)As in item 283(1) above but in RCC at foundation and footing with 4 cm 1.5\" gauge approved stone ballastRef No.287(1) |
| 228 | As in item 283(1) above but in RCC T beam and slab foofs and RCC Columns Ref No.288(1) |
| 229 | BRICK WORKFirst class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T & P etc required for proper completion of the workRef No.303Cement mortar 1:6 (1 cement : 6 fine sand) |
| 230 | As in item (301 to 304) above but in superstructure. Including necessary cutting and moulding of bricks as requiered and also including honey comb brick work, thickness of wall not to be less than 1.5 brick thick. Add extra labour to above item no. 301 to 304.Ref No.309Cement mortar 1:6 (1 cement : 6 fine sand) |
| 231 | As in item (309) above but for wall of half brick (4 1/2\") thick. Add for extra labour over item No. 310.Ref No.310(a)Cement mortar 1:6 (1 cement :6 fine sand) |
| 232 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.dsr-6.15 |
| 233 | Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).dsr-6.44 |
| 234 | MARBLE WORKProviding and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.dsr-8.2Granite of any colour and shadedsr-8.2.2Area of slab over 0.50 sqmdsr-8.2.2.2 |
| 235 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.dsr-8.3Granite workdsr-8.3.2 |
| 236 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.dsr-8.4 |
| 237 | WOOD WORK & PVC WORKAdditional cost for fixing glass panes with C.P. Teak wood beading and felt as directed by Engieer-in-charge Instead of putty and brad including cost of all materials, labour and T & Petc. required for proper completion of the workRef No.410 |
| 238 | As in item 470 but of C P. Teak decorative type (one side only) and commercial lipping approved ply wood flush shutters 4 cm(1 /2\") thick. As in item 470 but of C P. Teak decorative type (one side only) and commercial lipping approved ply wood flush shutters 4 cm. (1 1/2\") thick. Ref No.477 |
| 239 | As in item 478 but with Teak lipping single leaf door. Add extra to item 478Ref No.479 |
| 240 | Supply and fixing of 4 cm (1 1/2\") thick C. P. Teak wood door and window shutters with panels of heavy quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm.(1/10 or 1/12 or 1/6 inch) mesh or any other size with necessary beading, including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinges bolts, locks, handles, spring and/or other fittings but excluding their supply and including two coats of black Japan on all iron fittings, if necessary. (Fittings with necessary screws to be supplied departmentally). Ref No.450 |
| 241 | Supply of M.S. Grill of a approved quality and drawing made of flat iron not bigger then 20x4 mm size including supply of materials, fabrication, labour, T&P and also one coat of red oxide paint complete in all respect as per direction of Engineer-in- charge for proper completion of work at site.Ref No.3 |
| 242 | Supplying and fixing galvanised Mosquitos proof,heavy quality Iron wire gauge or expanded metal ef heavy quality over windows and including supply and fixing of C. P. Teak wood battens 8 cm X 1 cm (3\"x3/8\") and including supply of necessary screws, all materials, labour and T&P etc. required for proper completion of the work,Ref No.455 |
| 243 | STEEL WORKProviding and fixing 1 mm. thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6 mm. (1 1/2\"x1 1/2\"x1/4\") angle iron, 3.15 mm. (1/8\") gusset plates at the junctions & corners, hooks at top, 25 mm. (1\"), dia. pulleys at bottom, 40 X 40 x 6 mm.(1 1/2\"x1 1/2\"x1/4\") angles & T iron guides at top & bottom respectively includiug locking arrangement with handles, etc. complete and applying one priming coat of approved lead paint.Ref No.519 |
| 244 | Supply of Approved M.S. Z-section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt, hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of workRef No.1 |
| 245 | Supply of M.S. Angle iron door, windows ventilation frame made of approved M.S. angle iron wroght to required form including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work.Ref No.2 |
| 246 | Mild steel or iron work of small Sizes and Sections such as holding down bolts, hold fasts, tie, rods, gratings etc. (when not included in an over all rates) wrought to required form, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work.Ref No.502 |
| 247 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :dsr-10.34.0 mm thick glass panesdsr-10.30.1 |
| 248 | FLOORINGKota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :Ref No.14.4320 mm thick. |
| 249 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.Ref No.14.43 |
| 250 | Supply and fixing 5 mm thick China white glazed tiles So in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work. (size of tiles upto 200 x 300 mm)Ref No.628 |
| 251 | Supply and fixing 5 mm thick China white glazed tiles So in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work. (size of tiles upto 200 x 300 mm)Ref No.628 |
| 252 | Providing & Laying of 8 to 10 mm thick ivory or light Sqm shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement: 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work.Ref No.14.43Size of Tile 600x600 mm |
| 253 | Providing & Laying of 8 to 10 mm thick ivory or light Sqm shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement: 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work.New item no. 2Size of Tile 600x600 mm |
| 254 | ROOFINGMaking khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.dsr-12.22 |
| 255 | FINISHING12 mm Cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extral for mixing any additiveRef No.17.581:3 (1 cement: 3 coarse sand) |
| 256 | 15 mm Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm. In girth and finished even and smooth.Ref No.17.591:3 (1 cement: 3 coarse sand) |
| 257 | 6mm cement plaster of mixdsr-13.161:3 (1 cement : 3 fine sand)dsr-13.16.1 |
| 258 | White washing one supply of all Sqm.materials,labour and T&P etc. required for proper completion of the work.Ref No.671As in item No. 671 above but 3 coats white washing 2 coats as per item 672.Ref No.673 |
| 259 | One priming coat & one coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work.Ref No.649 |
| 260 | Finishing walls with water proofing cement paint of Sqm approved make and quality on new work with two coat to give to give an even shade. Including supply of all material, labour and T&P etc. required for proper completion of the work.Ref No.660 |
| 261 | Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the 1.S.I.No. 103 1950Ref No.641Primer Wood Work |
| 262 | Primer Steel Work |
| 263 | Painting roofs or other iron work in large area with one coat of ready mixed paint priming one coat of approved paint (British ANTISOL) including supply of all materials, labour & T&P etc. required for proper completion of the work. Paint to be used should confirm LSI.No. 103-1950. Cost for area of 650 Sft. Priming CoatRef No.644 |
| 264 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :dsr-13.65Two or more coats on new workdsr-13.65.1 |
| 265 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. dsr-13.80 |
| 266 | WATER PROOFINGProviding & Laying \"brick bat coba\" 100 mm thick laid with M-S 150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonry coba with top finishing plaster mixing with acetic water proofing compound @ 2% by weight & Including supply of all materials labour T&P etc required for proper completion of worksNew item-1 |
| 267 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:dsr-22.3(i) Iist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm). |
| 268 | Supply & filling of cinder in sunken portion of building including breaking into required sizes including supply of all material, labour, T&P required sizes including supply of al material, labour. T&P required for proper completion of work |
| 269 | (PART-B) PLUMBING WORKEARTH WORKEarth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.ref no.2.8All kinds of soil.ref no.2.8.1 |
| 270 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :ref no.2.1All kinds of soilref no.2.10.1Pipes, cables etc, not exceeding 80 mm dia.ref no.2.10.1.1 |
| 271 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm diaref no.2.10.1.2 |
| 272 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.ref no.2.25 |
| 273 | ROOFINGProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.ref no.12.41110 mm diameterref no.12.41.2 |
| 274 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.ref no.12.42Couplerref no.12.42.1110 mmref no.12.42.1.2 |
| 275 | Bend 87.5°ref no.12.42.5110 mm bendref no.12.42.5.2 |
| 276 | Shoe (Plain)ref no.12.42.6110 mm Shoeref no.12.42.6.2 |
| 277 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.ref no.12.43110 mmref no.12.43.2 |
| 278 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.ref no.12.44 |
| 279 | SANITARY INSTALLATIONSProviding and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :ref no.17.3W.C. pan with ISI marked black solid plastic seat and lidref no.17.3.2 |
| 280 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively.ref no.17.23 |
| 281 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:ref no.17.7White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tapref no.17.7.4 |
| 282 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :ref no.17.1Kitchen sink with drain boardref no.17.10.1510x1040 mm bowl depth 250 mmref no.17.10.1.1 |
| 283 | Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern.ref no.17.16 |
| 284 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.ref no.17.31 |
| 285 | Providing and fixing toilet paper holder :ref no.17. 34Vitreous chinaref no.17.34.2 |
| 286 | Providing and fixing soil, waste and vent pipes :ref no.17. 35100 mm dia.ref no.17.35.1Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989ref no.17.35.1.2 |
| 287 | 75mm diameterref no.17.35.2Centrifugally cast (spun) iron socketed pipe as per IS: 3989ref no.17.35.2.2 |
| 288 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : ref no.17. 37For 100 mm dia. piperef no.17.37.1 |
| 289 | For 75 mm dia. pipe ref no.17.37.2 |
| 290 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.ref no.17. 38100 mm ref no.17.38.1Sand cast iron S&S as per IS - 3989ref no.17.38.1.2 |
| 291 | 75 mm ref no.17.38.2Sand cast iron S&S as per IS- 3989ref no.17.38.2.2 |
| 292 | Providing and fixing plain bend of required degree.ref no.17. 39100 mmref no.17.39.1Sand cast iron S&S as per IS : 3989ref no.17.39.1.2 |
| 293 | 75 mmref no.17.39.2Sand cast iron S&S as per IS - 3989ref no.17.39.2.2 |
| 294 | Providing and fixing heel rest sanitary bendref no.17. 40100 mmdiaref no.17.40.1Sand cast iron S&S as per IS - 3989ref no.17.40.1.2 |
| 295 | 75 mm diaref no.17.40.2Sand cast iron S&S as per IS - 3989ref no.17.40.2.2 |
| 296 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick,bolts and nuts complete. ref no.17. 43100x100x100mmref no.17.43.1Sand cast iron S&S as per IS - 3989ref no.17.43.1.2 |
| 297 | 75x75x75mmref no.17.43.1Sand cast iron S&S as per IS - 3989ref no.17.43.2.2 |
| 298 | Providing and fixing single equal plain junction of required degreeref no.17. 4475x75x75mmref no.17.44.2Sand cast iron S&S as per IS - 3989ref no.17.44.2.2 |
| 299 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :ref no.17. 55100 mmref no.17.55.1Sand cast iron S&S as per IS - 3989ref no.17.55.1.2 |
| 300 | 75 mmref no.17.55.2Sand cast iron S&S as per IS - 3989ref no.17.55.2.2 |
| 301 | Providing and fixing terminal guard :ref no.17. 56100 mm ref no.17.56.1Sand cast iron S&S as per IS - 3989ref no.17.56.1.2 |
| 302 | 75 mm ref no.17.56.2Sand cast iron S&S as per IS - 3989ref no.17.56.2.2 |
| 303 | Providing and fixing collar :ref no.17. 57100 mmref no.17.57.1Sand cast iron S&S as per IS - 3989ref no.17.57.1.2 |
| 304 | Sand cast iron S&S as per IS - 3989ref no.17.57.2.2 |
| 305 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :ref no.17. 58100 mmref no.17.58.1 |
| 306 | 75 mmref no.17.58.2 |
| 307 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :ref no.17. 59100 mmref no.17.59.1 |
| 308 | 75 mmref no.17.59.2 |
| 309 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :ref no.17.61100 mm diaref no.17.61.1 |
| 310 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :ref no.17.6575 mm diameter piperef no.17.65.2 |
| 311 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.ref no.17.69Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gmsref no.17.69.2 |
| 312 | Providing and fixing PTMT Bottle Trap for Wash basin and sink.ref no.17.7Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gmsref no.17.70.1 |
| 313 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.ref no.17. 71 |
| 314 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.ref no.17.73600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.ref no.17.73.2 |
| 315 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :ref no.17.1Kitchen sink with drain boardref no.17.10.1510x1040 mm bowl depth 250 mmref no.17.10.1.1 |
| 316 | Providing and fixing 8mm dia C.P / S.S Jet with flexible tube upto1 metre long with S.S triangular plate to Eureopean type W.C of quality and make as approved by engineer-in-charge. ref no.17.16A |
| 317 | External workProviding and fixing G.I. pipes complete with G.I. fittings including trenching & refilling.ref no.18.1232mmdia nominal boreref no.18.12.4 |
| 318 | 40mmdia nominal boreref no.18.12.5 |
| 319 | WATER SUPPLYInternal work - Exposed on wallProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.ref no.18.720 mm nominal outer dia Pipesref no.18.7.2 |
| 320 | 25 mm nominal outer dia Pipesref no.18.7.3 |
| 321 | 32 mm nominal outer dia Pipesref no.18.7.4 |
| 322 | 40 mm nominal outer dia Pipesref no.18.7.5 |
| 323 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.ref no.18.8Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipesref no.18.8.1 |
| 324 | 20 mm nominal outer dia Pipesref no.18.8.2 |
| 325 | 25 mm nominal outer dia Pipesref no.18.8.3 |
| 326 | 32 mm nominal outer dia Pipesref no.18.8.4 |
| 327 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :ref no.18.1325 to 40 mm nominal boreref no.18.13.1 |
| 328 | Providing and fixing brass stop cock of approved quality :ref no.18.1615 mm nominal boreref no.18.16.1 |
| 329 | 20 mm nominal boreref no.18.16.2 |
| 330 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :ref no.18.1725mm nominal boreref no.18.17.1 |
| 331 | 32mm nominal boreref no.18.17.2 |
| 332 | 40mm nominal boreref no.18.17.3 |
| 333 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :ref no.18.1825 mm nominal boreref no.18.18.3 |
| 334 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :ref no.18. 2025 mm nominal boreref no.18.20.3 |
| 335 | Providing and fixing uplasticised PVC connection pipe with brass unions :ref no.18.2145 cm lengthref no.18.21.215 mm nominal boreref no.18.21.2.1 |
| 336 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :ref no.18.22100 mm diameterref no.18.22.1 |
| 337 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.ref no.18. 48Rectangular tankref no.18. 48B |
| 338 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :ref no.18.4915 mm nominal boreref no.18.49.1 |
| 339 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.ref no.18.5115 mm nominal boreref no.18.51.1 |
| 340 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.ref no.18.5215 mm nominal bore.ref no.18.52.1 |
| 341 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931ref no.18. 5315 mm nominal boreref no.18.53.1 |
| 342 | Providing and fixing PTMT grating of approved quality and colour.ref no.18.58Circular type.ref no.18.58.1100 mm nominal dia.ref no.18.58.1.1 |
| 343 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.ref no.18. 77 |
| 344 | SEWARAGE & DRAINAGEProviding, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :ref no.19.1100 mm diameterref no.19.1.1 |
| 345 | 150 mm diameterref no.19.1.2 |
| 346 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :ref no.19. 2100 mm diameter S.W. piperef no.19.2.1 |
| 347 | 150 mm diameter S.W. piperef no.19.2.2 |
| 348 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design:ref no.19.4180 x 150 mm size P typeref no.19.4.3With common burnt clay F.P.S. (non modular) bricks of class designation 7.5ref no.19.4.3.1 |
| 349 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : ref no.19.7Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : ref no.19.7.1With common burnt clay F.P.S. (non modular) bricks of class designation 7.5ref no.19.7.1.1 |
| 350 | Extra for depth for manholes :Size 90x80 cmref no.19.8.1With common burnt clay F.P.S. (non modular) bricks of class designation 7.5ref no.19.8.1.1 |
| 351 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture\"s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.ref no.19. 16 |
| 352 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :ref no.19.21For pipes 100 to 250 mm diameterref no.19.21.1 |
| 353 | Providing, laying and jointing non pressure NP2 class (light duty)RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :ref no.19.6150 mm dia RCC piperef no.19.6.2 |
| 354 | 250 mm dia RCC piperef no.19.6.3 |
| 355 | (PART-C) FIRE FIGHTINGSub-Head (Fire Pumps & Accessories) ASupply, Erection, testing & Commissioning of electric motor driven automaticpump set consisting of the following as per specifications:(i) Horizontal mounted centrifugal type single stag fire pump for building pressure loss due to any leakage in the system and capable to deliver approx. 900 LPM against a total head of 40 Mtr. having cast iron body, bronze impeller , stainless steel shaft .(ii) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volt (+,- 10%) 3 Phase 50 Hz. AC Supply of suitable capacity for the above pump with Synchronous speed of 2900 rpm confirming to IS:325.(iii) Common base plate for mounting pump and motor fabricated of suitable MS channel and coupling, guard etc.900LPM 40 Mtr. Head |
| 356 | Design, manufacture, supply, storing, inspection, handling, assembling, installation in correct alignment, position, affecting proper connections, testing and commissioningof 14 SWG CRCA sheet steel fabricated cubical type Electrical Control Panel for fire fighting pumps floor mounting, dust & vermin proof, front operatedconstruction, enclosure class - IP 52. Completewith top/bottomremovable gland plates, as required, double compression type cableglands,earth bus, hinged and lockable doors. Complete with all inter connectionssmall wiring by min. 2.5 sq. mm. copper wires, ckt labels,The Copper Bus Bar shall be of suitable length, 200 Amp., 3 phase 50 Hz TPN, electrolytic copper. The panel shall be provided with interlocking arrangement between electric motor driven and diesel engine driven pumps.Provisions shall be made for providing potential free contacts to all pump starters for connection to building automation system / Fire alarm control panel. The fault withstanding capacity of panel shall be 35 KA rms for 1 sec.Following Fire fighting pumps shall have to be controlled - Incomer : 160 AMP FP MCCB with flush mounting square CT operated ammeter with selector switch, Voltmeter with selector switch, protective fuses and phase indicating lamps. Outgoings : 1 nos. 100 AMP TPN MCCB with star delta starter suitable for sprinkler pump with CT operated ammeter with selector switch and indication lamps for \"On\" \"Off\" and \"Trip\" mounted on the cubicle door. 2 nos. 63 AMP TP MCCB with star delta starter suitable for jockey pump with CT operated ammeter with selector switch and indication lamps for \"On\" \"Off\" and \"Trip\" mounted on the cubicle door. |
| 357 | Providing & fixing double flanged vertical air Pressure vessel fabricated form 8mm M.S. Plate with dished ends from 8mm M.S. Plate out side with one coat at primer and two coat of synthetic enamel paint of approved shade complete with approved qualityto operate at drop of pressure automatically at required pressure setting.Recommended Dia 150 MMWorking Pressure – 7 K.g/Sqcm.Test Pressure – 10 Kg/Sqcm |
| 358 | Providing, fixing of Pressure Gauge of required capacity as per fire fighting nobs.Pressure Test Gauge connects to any ¾ “ garden hose connection and is just the thing for quickly checking residential or commercial water systems for pressure problems. The PG150 Water System Pressure Test Gauge\"s re-settable maximum pressure hand stays at the water system’s highest pressure point during the test period. The Water System Pressure Test Gauges provide a quick indicator of any pressure spikes that might have occurred. |
| 359 | Providing and fixing, C.I. double flanged horizontal / vertical type Check valve NON return valve (NRV)including nuts, bolts 3 mm thick rubber insertions compete to IS : 5312 Part – 1 swing type classPN : 1-6.Providing, fixing of Pressure switch to operate of fire pump automatically on/off.Pressure switch is a form of switch that makes electrical contact when a certain set pressure has been reached on its input. This is used to provide on/off switching from a pneumatic or hydraulic source. The switch may be designed to make contact either on pressure rise or on pressure fall. |
| 360 | 100 mm Dia |
| 361 | Providing & fixing of butter fly valve suitable for pressure 15 kg/cm2 with flanges. Nut bolts and gasket complete as required.(PN : 1-6 type)Butterfly valve is a type of flow control device, typically used to regulate a fluid flowing through a section of pipe A flat circular plate is positioned in the center of the pipe. The plate has a rod through it connected to an actuator on the outside of the valve. Rotating the actuator turns the plate either parallel or perpendicular to the flow. Unlike a ball valve, the plate is always present within the flow, therefore a pressure drop is always induced in the flow regardless of valve position. butterfly valve is from a family of valves called quarter-turn valves. The \"butterfly\" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the process fluid. The valve may also be opened incrementally to regulate flow.100 mm Dia |
| 362 | Providing & fixing of CI \"Y\" type strainer flanged with SS 304 perforated screen.“Y” type including, nuts, bolts and 3mm thick rubber insertion complete.“Y” Strainer is rated for 640 psi (44.1 Bar) at 100°F (38°C). The “Y” Strainer provides economical strainer protection for piping equipment such as pumps, meters, valves, compressors, traps and similar equipment. The inlet and outlet ends are suitable for installation200 mm Dia |
| 363 | Providing & fixing of hand lever operated forged brass body full way ball valve type isolating valveHaving forged brass hard chrome plated mirror finish ball, steel handle with PVC grip, Teflon seat, screwed ends tested to a pressure of 15 kg/sqcm complete. 25 mm Dia |
| 364 | Providing & fixing air release valve with forged brass body full way ball valve Type isolating valve, flanges / union, suitable for sprinkler system with all necessary connections complete in all respects.25 mm Dia |
| 365 | forabove ground laying for hydrants and sprinkler system including transportation of materials up to the worksite, cutting the pipes to required length, edge preparation, welding, fixing / erection of pipes including specials i.e. bends, tees, reducers, flanges, expansion joints wherever required, washers, nuts, bolts etc. in proper position , anchor fastener and washer for hydrant / sprinkler piping, jointing by welding, aligning the pipe line, . Hydrostatic testing of system as specified, flushing & cleaning by water etc. complete as per drawings & direction of the Engineer-in-charge. 80 mm Dia |
| 366 | 100 mm Dia |
| 367 | With terminal joints by palm or pin typecable sockets (lugs), insulating with tapes, double compression type brass and nickel plated compression glands. On surface, the cable run shall be on MS cable trey or fixed on M.S. clamps etc.of suitable size or as directed by engineer-in- charge, complete in all respects. In ground the cable shall be laid at a depth of 750 mm from ground Level including a cushion of 75 mm thick. Fine river sand alround, duly protected by bricks on sides and top including excavation and back filling of soil or laid in RCC hume pipe as called for. The armouring shallbeproperly connected with the earth conductor by clampsetc.3 X 6sq.mmcopper armourd cable |
| 368 | 2 X 2.5 sq.mm CopperCable |
| 369 | Providing & Fixing of ISI marked SS single headed 63 mm dia.Hydrant Valve, 80 mm dia flanged inlet with 63 mm female instantaneous outlet confirming to IS : 5290-1977 on the fire wet riser/down comer. including making 80 NB pipe connection with riseralong with 100 mm dia dial pressure gauge of calibration 0-15 kg/sq cm, fixing the landing valves in proper positions, including supply of nuts, bolts, gaskets, caps, chains etc. testing the hydrant and completing the work in all respect as per directions of the Engineer-in-charge. |
| 370 | Providing & Fixing of RRL Hose pipe 63 mm dia and 15 meter long rubberized fabric lined one length including SS male - female instantaneous type coupling wounded complete conforming to IS:636-1988 type A.RRL Hose (Rubber Reinforced Lined) Specification: IS:636 Size : 63 mm x 15 mtr (or as per client requirement) of SS Male & Female 63 mm coupling ISI marked conforming to IS:903 Binded with GI wire. |
| 371 | Providing and fixing 63 mm dia instantaneous patterns SS branch shortpipe.16 mm dia nozzle conforming to IS : 903 suitable for inter connection to hose pipe coupling complete as required. |
| 372 | Providing & Fixing of 20 mm bore and 30 meter long hose (high pressure rubber braided hose pipe as per IS:444)Hose reel suitable for 10 kg/sqcm operating pressure for first aid fire fighting conforming to IS : 884, with 180o full swing drum, fixing brackets, shut off SS nozzle, 25 mm dia. hand lever operated isolating ball valve, connecting directly from the riser through25 mm dia. MS.pipe with sockets, elbows, nipples etc. including providing operating instructions on a metal plate and fixing it near hose reel. The system shall be complete in all respects as per drawings and directions of Engineer-in-charge. |
| 373 | Providing & fixing standard carbon steel fireman axe with rubber insulated handle tested to 20000 Volts. |
| 374 | Providing and fixing standard fire hose cabinet door frame (750 x 600 mm x 250 mm ) suitable to fit in the duct made of not less than 16 SWG MS sheethaving full fronted glass hinged door (5 mm thick clear glass) including necessary locking arrangement with handle as required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coats of fire red color). The door shall be fixed in the masonry wall or as required. The words \"FIRE HOSE\" to be painted on the box. |
| 375 | Providing & fixing of self glowing exit sign boards of size 10\"x 6\"printed made of luminescent safety rigid sheet in standard colour, photo luminescent sheet.made of crystals consisting mainly Zinc sulphide in protectition glass like shell, green and yellow crystal luminescent (glass in dark) by action of light. |
| 376 | Tank 5000ltrs |
| 377 | Assembly with 100 mm dia outlet suitable for local fire tender complete as required. |
| 378 | Providing & fixingof ABC Type Fire Extinguishers.4kgFeatures: It is very useful for extinguishing common types of fires which generally originate in workplaces or homes due to some accident or short circuit. They are highly effective against the fires caused by electrical short circuit as the ammonium phosphate contained in it is a bad conductor of electricity and hence eliminates the changes of electrocution. Compared to other ordinary fire extinguishers, they are effective when it comes to extinguishing fires by greasy materials like petroleum. Water fails to extinguish fires caused by fuels. The ABC Type fire extinguishers are far better than others as they are suitable for extinguishing Type A, Type B and Type C fires where as others can extinguish only one type of fire. |
| 379 | Providing & Fixing of Carbon Dioxide(CO2) Type Fire Extinguishers 4.5kgFeatures: Carbon dioxide extinguishers manufactured by us have quick flame suppression properties. These fire extinguishers are suitable for handling fires which involves inflammable liquids such as gasoline, oil, paints, varnishes and natural gases. These extinguishers have been effective used for extinguishing fires in machines. It is due to the fact, that these cut the supply of oxygen faster. |
| 380 | Providing & Fixing of Mechanical Foam Type Fire Extinguishers 50kg.Supply of Mechanical Foam. |
| 381 | Providing & Fixing of Carbon Dioxide(CO2) Type Fire Extinguishers 22.5kgFeatures: Carbon dioxide extinguishers manufactured by us have quick flame suppression properties. These fire extinguishers are suitable for handling fires which involves inflammable liquids such as gasoline, oil, paints, varnishes and natural gases. These extinguishers have been effective used for extinguishing fires in machines. It is due to the fact, that these cut the supply of oxygen faster. |
| 382 | (PART-D) ELECTRICAL WORKWIRING IN STEEL AND PVC CONDUITWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.DSR 2022 Sl No.1.3Group ASl No.1.3.1 |
| 383 | Group BSl No.1.3.2 |
| 384 | Group CSl No.1.3.3 |
| 385 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.DSR 2022 Sl No.1.5 |
| 386 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.DSR 2022 Sl No.1.72 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wireSl No.1.7.2 |
| 387 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wireSl No.1.7.9 |
| 388 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wireSl No.1.7.10 |
| 389 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wireSl No.1.7.11 |
| 390 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.DSR 2022 Sl No.1.182 Pair Sl No.1.18.2 |
| 391 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.DSR 2022 Sl No.1.19 |
| 392 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.DSR 2022 Sl No.1.225 mm1.20.2 |
| 393 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.DSR 2022 Sl No.1.245/6 A switchSl No.1.24.1 |
| 394 | 15/16 A switchSl No.1.24.3 |
| 395 | 3 pin 5/6 A socket outletSl No.1.24.4 |
| 396 | 6 pin 15/16 A socket outletSl No.1.24.5 |
| 397 | Telephone socket outletSl No.1.24.6 |
| 398 | TV antenna socket outletSl No.1.24.7 |
| 399 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.DSR 2022 Sl No.1.25 |
| 400 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.DSR 2022 Sl No.1.26 |
| 401 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.DSR 2022 Sl No.1.271 or 2 Module (75mmX75mm)Sl No.1.27.1 |
| 402 | 3 Module (100mmX75mm)Sl No.1.27.2 |
| 403 | 4 Module (125mmX75mm)Sl No.1.27.3 |
| 404 | 6 Module (200mmX75mm)Sl No.1.27.4 |
| 405 | 8 Module (125mmX125mm)Sl No.1.27.5 |
| 406 | 12 Module (200mmX150mm)Sl No.1.27.6 |
| 407 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.DSR 2022 Sl No.1.33 |
| 408 | Installation,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.DSR 2022 Sl No.1.35 |
| 409 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.DSR 2022 Sl No.1.45 |
| 410 | Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.DSR 2022 Sl No.1.49 |
| 411 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.DSR 2022 Sl No.1.5Upto 450 mm sweepSl No.1.50.1 |
| 412 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.DSR 2022 Sl No.1.51 |
| 413 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.DSR 2022 Sl No.1.54Group ASl No.1.54.1 |
| 414 | Group BSl No.1.54.2 |
| 415 | Group CSl No.1.54.3 |
| 416 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required.DSR 2022 Sl No.1.57 |
| 417 | Telephone cable, 0.5 mm solid annealed cu., jelly filledNSRNSRSupply installation, testing and commissioning of 0.5 mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filled with poly-al laminate moisture barrier, polythene sheathed, unarmoured polythene jacketed telephone cables as per DOT specifications of following sizes10 Pair NSR N1 |
| 418 | Telephone tag blockNSRNSRSupply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below:NSR10 Pair NSR N2 |
| 419 | MCB DBs AND ACCESSORIESSupplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive ofV 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomeras required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)DSR 2022 Sl No.2.58 way (4 + 24), Double door (For Essential Load)Sl No.2.5.2 |
| 420 | 12 way (4 + 36), Double doorSl No.2.5.3 |
| 421 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.DSR 2022 Sl No.2.1Single Pole2.10.1 |
| 422 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.DSR 2022 Sl No.2.11 |
| 423 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.DSR 2022 Sl No.2.12 63 ASl No.2.12.2 |
| 424 | Supplying and fixing following rating, four pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.DSR 2022 Sl No.2.13 63 ASl No.2.13.2 |
| 425 | 100 ASl No.2.13.3 |
| 426 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.DSR 2022 Sl No.2.25 |
| 427 | LIGHTING FIXTURES & FANSSupplying LED 18W Recess / Surface Mounting, CCT-6000K, CRI>70, PF>0.95,Downlighter complete as required of approved make.NSR N3 |
| 428 | Supplying LED 15W, CCT-6000K, CRI>70, PF>0.95, Mirror Light complete as required of approved make.NSRN4 |
| 429 | Supplying LED 20W, CCT-6000K, CRI>70, PF>0.95, Tube Light Fixture complete as required of approved make.NSR N5 |
| 430 | Supplying LED 43 W, CCT-6000K, CRI >70, PF>0.95, 2\"x2\" Size Panel Light Fixture complete as required of approved make.NSRN6 |
| 431 | Supplying Star rated double ball bearing capacitor start, aluminium body & blade 1200 mm Sweep 5 Star rated ceilingfan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor etc. complete as required of standard approved make.NSR N7 |
| 432 | Supplying Star rated High Air Throw 1300 ~ 1400 RPM single phase ISI marked 400 mm sweep (1300~1400 RPM) Wall Mountedfan with adjustable speeds in 5 steps by pull chord switch, etc. complete as required of standard approved make.NSR N8 |
| 433 | Supplying Heavy duty capacitor start, Double ball bearing900 / 1400 RPM single phase ISI marked 300 mm sweep (900/1400 RPM) Exhaustfan, IS:2312 markedetc. complete as required of standard approved make.NSR N9 |
| 434 | Supplying Iron and Aluminium Louver for Exhaust comple as reqyuired ofapproved make.NSRN10 |
| 435 | EARTHINGEarthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.DSR 2022 Sl No.5.4 |
| 436 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)DSR 2022 Sl No.5.9 |
| 437 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.DSR 2022 Sl No.5.11 |
| 438 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.DSR 2022 Sl No.5.15 |
| 439 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.DSR 2022 Sl No.5.16 |
| 440 | Intercom / EPABX SystemsSupply, installation, testing and commissioning of EPABX system consisting of 8 Nos. extensions complete as requiredof approved make.NSR N11 |
| 441 | Automation Electrical Control System |
| 442 | Passenger Lift for 16 Passenger @ 1088 KG |
| 443 | CC PAVER BLOCK @ 227 SQMProviding and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. DSR-2021 Sl No. 16.68 |
| 444 | RCC Road @ 235 MeterExcavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete DSR-2021 Sl No. 2.25a |
| 445 | Construction of RCC road including earth work preparation of sub greds supply of stone blast, laying, spreading and compacting WBM, providing and laying factory made kerb stone of M-25 providing and laying CC pavement of mix M-25 with ready mixed concrete from baching plant including steel reinforecement for RCC work complete in all respect as attached by analysis ofRoad DSR-2021 |
AI Tender Summary
Tender Timeline
Feb 28, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 01, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender