|
| 1 | TW beading for fixing glass |
| 2 | Add sundries charges at 2 % on Material |
| 3 | Mixer (concrete small used in culvert) |
| 4 | Laboratory Asst. (SSLC Passed)/Mate/Supervisor |
| 5 | Mosquito proof coupling 25mm |
| 6 | Enamel paint |
| 7 | Silver oak or equivalent planks 38 mm thick |
| 8 | M.S. holder bat clamp 32mm |
| 9 | Z section |
| 10 | Mason Class I (with tools) |
| 11 | Transportation/loading and unloading of material/lifting of material /Wastage/Unforeseen charges/Miscellaneous which are necessary during execution. |
| 12 | Polythylene pipes high density 40mm external dia |
| 13 | TMT bars Fe 500 |
| 14 | CP brass waste 32 mm of standard pattern |
| 15 | Stone Chistler Class II |
| 16 | Size stone 20 x 20 x 25 cms |
| 17 | Painter Class I |
| 18 | Add |
| 19 | Copper plated brass piller tap 15mm |
| 20 | Handles |
| 21 | Cudddapah slab 2.5 cms thick |
| 22 | Polyenthylene water storage tank of specified capacity L |
| 23 | Coarse sand (zone III) |
| 24 | Jungle wood runners and planks |
| 25 | Unit Cost as per the Specification |
| 26 | Casurina poles 100 - 150 mm |
| 27 | HOM of Vibrator 0.71 days |
| 28 | Broken stone aggregate 12 mm to 10 mm size |
| 29 | White cement |
| 30 | Mason Class II (with tools) |
| 31 | Ceramic tiles 30 x 30 cms |
| 32 | Gravel 2.36 mm/Murrum |
| 33 | Casurina Poles 75 - 100 mm dia |
| 34 | Fitter Class I |
| 35 | CP brass chain with plug |
| 36 | Handling loading and unloading 3% on Material |
| 37 | P.V.C. flushing cistern 10 lts low level with fitting |
| 38 | Plastic emulsion paint |
| 39 | Boulders |
| 40 | White vitreous china clay flat back wash basin size 630x450mm |
| 41 | Add Handling , loading and unloading at 1% on Material |
| 42 | Brass stop cock |
| 43 | C.I. / M.S. brackets for flushing cistern |
| 44 | Portland Cement |
| 45 | Add Brush, putty, sand paper, roller at 5% on cost of paint |
| 46 | Broken stone aggregate 20 mm size |
| 47 | Add White lead paint, gasket, cement, sand for making good the wall and floor at 2% on Material |
| 48 | Add watering charges at 1 % on Material |
| 49 | Polythylene pipes high density 25mm external dia |
| 50 | Licenced Plumber with tools |
| 51 | Add 5% for fittings and wastage charges |
| 52 | Mullion section |
| 53 | Add Brush, putty, sand paper at 2% on cost of paint |
| 54 | Pigment |
| 55 | Water |
| 56 | MS clamps |
| 57 | Welder Grade I |
| 58 | Bond stone 20 x 20 x 45 cm |
| 59 | Orissa pattern of size 580x440mm with integral type foot rests |
| 60 | Vitrified tiles 600x600 mm |
| 61 | Add Cement sand and grit 1% on Material |
| 62 | 100mm S or P trap |
| 63 | Add Handling , loading and unloading at 2% on Material |
| 64 | Add providing and removing scaffolding at 3% on Labour |
| 65 | Plasticizer / super plasticizer |
| 66 | Hinges 5\" heavy duty |
| 67 | Stays |
| 68 | C.I. / M.S. brackets for flushing cistern |
| 69 | Reeded glass 2 mm thick |
| 70 | Water Tanker |
| 71 | G.I. Overflow pipe 20mm dia |
| 72 | water proofing cement paint |
| 73 | Binding wire |
| 74 | Ready mix primer paint (Ready mix red lead paint) |
| 75 | T section |
| 76 | Lead or PVC connection pipe 32mm dia (for wash basin) |
| 77 | Add Wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint |
| 78 | Hollow concrete blocks (40*20*20 cms)-5.00 N/Sqmm |
| 79 | G.I. 32mm dia telescopic flush pipes with fittings specials |
| 80 | PVC pipe of 4kg\cum,110 mm |
| 81 | Vibratory Roller 8 Tonne |
| 82 | Add sundries charges at 1 % on Material |
| 83 | Special for overflow pipe |
| 84 | Labour charges for lifting and placing in position and making connection at 7% on Material |
| 85 | Broken stone aggregate 40 mm size |
| 86 | Mixer (concrete) - 1 cum Capacity |
