}

Tender For Improvement Of Lwss Ambhera Dhiraj In Tehsil Amb Distt Una (Hp)(Sh:C/O Sector Storage Tank In 30000 Ltr Capacity In Kathoh & Laying, Jointing &Testing Of Gi Pipe With Existing Distribution Network)Under Basp Job No.1, Una-Himachal Pradesh

Irrigation And Public Health Department has published Tender For Improvement Of Lwss Ambhera Dhiraj In Tehsil Amb Distt Una (Hp)(Sh:C/O Sector Storage Tank In 30000 Ltr Capacity In Kathoh & Laying, Jointing &Testing Of Gi Pipe With Existing Distribution Network)Under Basp Job No.1. Submission Date for this Tender is 22-02-2023. Tanks and Cylinders Tenders in Una Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

36271962
Tender For Improvement Of Lwss Ambhera Dhiraj In Tehsil Amb Distt Una (Hp)(Sh:C/O Sector Storage Tank In 30000 Ltr Capacity In Kathoh & Laying, Jointing &Testing Of Gi Pipe With Existing Distribution Network)Under Basp Job No.1
Open Tender
Indian
Himachal Pradesh
Una
22-02-2023

Tender Details

Improvement Of Lwss Ambhera Dhiraj In Tehsil Amb Distt Una ( Hp ) ( Sh:C / O Sector Storage Tank In 30000 Ltr Capacity In Kathoh & Laying, Jointing &Testing Of Gi Pipe With Existing Distribution Network ) Under Basp Job No.1

Key Value

Document Fees
INR 250 /-
EMD
INR 10430.0 /-
Tender Value
INR 5.21 Lakhs /-

BOQ Items

ame of Work:Improvement of LWSS Ambhera Dhiraj in Tehsil Amb Distt Una (HP)(SH:C/O Sector Storage tank in 30000 Ltr Capacity in Kathoh & Laying, jointing &testing of GI Pipe with existing distribution network)under BASP Job No.1
Sl. No. Item Description
1Excavation in foundations,trenches etc., in earth work, lift upto 1.50 mts. Stacking the excavated soil not more than 3 mts. Clear from the edge of the excavation & then returning the stacked soil in 15 cms. Layers,when required into plinths sides of foundation etc.,consolidating each deposited layers by ramming & watering & then disposing of all surplus excavated earth as dierected within all leads & lifts as per entire satisfaction of Engineer in charge.
2Providing & laying cement concrete M-10 mix concrete using graded stone aggregate 40 mm nominal size, excluding the cost of centring & shuttering in Foundation & plinth.
3Providing & laying cement concrete M- 30 not less then 1:1.5:3 mix concrete using aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for reinforced concrete work in :-(i) Foundation,footing,bases of columns and the like & mass concrete.
4(ii) Wall (any thickness but not less than 0.10 mts.Thickness)attached pillasters,buttresses plinth,& string courses etc.from top of found.level upto floor two level
5Prov.form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm,so as to give a fair finish i/c centring shuttering,strutting & propping etc. with wooden battens & ballies,ht. of propping & centring below supporting floor to ceiling not exceeding 4.00 mts. & removal of the same for in situ-reinforced concrete & plain concrete work :- Vertical surfaces such as wall (any thick.) partitions & the like i/c attached pillasters,buttresses,plinth & string courses & the like.
6Prov.form work of ordinary timber plankings so as to give a rough finish i/c centring, shuttering,strutting & propping etc. ht.of propping & centring below supporting floor to ceilingnot exceeding 4 mts. & removal of the same for insitu-reinforced concrete & plain concrete work in :-Arches beyond 6.00 mts.span
7Prov.in RCC work smooth finishing of the exposed surface with cement mortor1:3(1cement :3 sand )
8Providing & laying cement concrete M- 30 not less then 1:1.5:3 mix concrete using aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for RCC work in :-(i) Suspended floor,roofs,landing & shelves & their support balconies,beams,girders,bressumers & cantilever upto floor level.
9(ii) Arches upto floor two level.
10Tor steel reinforcement for RCC work i/c bending,binding & placing complete upto floor two level.
11Steel work welded in built up sections,trusses & framed work i/c cutting,hoisting & fixing in position & applying a priming coatof red paint :- In grating, framed ,guards,bars, ladders,railing,brackets & similar works.
12laying jointing &testing in trenches GMS/MS Tubes (L/M class) tube fitting (Earth work in trenches to be measured & paid for separately) i) 100 mm Score pipe
13100 mm Inlet, Outlet,Over flow
14Providing & fixing CI Sluice valve RG/Sachdeva/Kartar (with hand wheel) as per IS : 780-1984 class-I upto 300 mm dia.(i/c brass spindle & as per 2906-1984 class-II for dia.> 300 mm) complete with bolts nuts,rubber insertion etc.,(the tail piece if required shall be measured & paid for separatly)i) 100 mm Scare pipe
15ii) 100 mm Inlet, Out let, Over flow
16Prov. & fixing CI Man hole cover with framehaving frames size of 500 mm internal dia.shouldnot be less than 58 kg
17Laying jointing and testing of GMS light pipe including cost of bends complete as per;1239-1979 Part-1 of fpllowing diameter in trenches complete in all respect as per direction of engineer-in charge.
18TERMS & CONDITIONS ATTACHED
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail