Tender For Providing Aluminum Partition Electrical Work And Networking In Hall No. 303 304 At Central Block Nit Hamirpur For Shifting Of Academic Branch From Corporate Office
Tender Value
15.06 Lakhs
Estimated cost
Bid Submission
06 Mar 2023
0 days left
EMD
30200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Aluminum Partition Electrical Work And Networking In Hall No. 303 304 At Central Block Nit Hamirpur For Shifting Of Academic Branch From Corporate Office
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubularsections/appropriate Z sections and other sections of approved make of Jindal,Hindalco,Nalco etc. conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately)including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 2 | For fixed portion:21.1.1.1Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 3 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 4 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc.complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 6 | With float plain/frosted glass panes of 5 mm thickness of SAINT GOBAIN (weight not less than 12.50 kg/ sqm) |
| 7 | Providing and fixing 5mm thick bakalight tile/sheet in aluminium shutter with aluminium beading and rubber/gasket complete of Jindal,Hindalco,Nalco etc. as per direction of Engineer - In - Charge including entire carriage of materials upto all leads, lifts and cost of other incidentals. |
| 8 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer of OZONE, SPIDER (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 9 | Providing and fixing 300x16 mmsize aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screwsetc. completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 10 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 11 | 125 mm |
| 12 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 13 | 250x10mm |
| 14 | Providing, installation testing & commissioning of Rack and other components 9U wall mounting cabinets complete inall respect including standard accessories :1U Cable Manager (01 Nos), Hardware Packet (1 No) , 4 Socket 5 Amp. Power Distribution Unit (1 No) Roof Mounted Fan Unit (1 No)of D-Link/ Com Rack/Panduit (Pannet)/ Legrand/ RackOmmakeincluding entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 15 | Providing, installation testing & commissioning of Cat 6 UTP patch panel fully loaded complete in all respect of D-Link/ Com Rack/Panduit (Pannet)/ Legrand/ RackOm make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 16 | Providing, fixing, testing and commissioning of CAT 6UTP LAN cable of Molex/ D-Link/ Amp/ R&M/ Legrandmake in the existing PVC/ steel conduit/trunking as requiredalongwith punching/crimping & permanet numbering both ends (patch pannels switch side and IO port Side)including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 17 | Providing and fixing of 25/50mm dia PVC conduit (ISI Mark) along with the accessories in surface/ recess including painting in case of surface conduit or cutting the wall and making good in the same in case of recessed conduit as required with dismenteling of damaged/ broken conduit including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 18 | Providing, installation testing and commissioning of CAT 6 Information outlet complete in all respect including British/American styleface plate and Surface mount Box back ofMolex/ D-Link/ Amp/R&M//Legrand in the existing PVC/ steel conduit including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 19 | Providing, installation testing and commissioning ofCat 6 UTP Patch cord 1 mtr or 1/2 mtr-at rack end ofMolex/ D-Link/ Amp/R&M//Legrand make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 20 | Providing, installation testing and commissioning ofCat 6 UTP Patch cord 2 mtr-ofMolex/ D-Link/ Amp/R&M//Legrand make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 21 | Providingand fixing surface mounted 36 watt LED Luminaire of size 600mm x600mm equipped with CRCA powder coated housing with PS micro prismatic diffuser for symmetric light destribution with non- entegral energy efficentelectronic driver of Bajaj / crompton/ Wipro/ panasonic makeas required including entire carriage of material in all leads, lifts, height and cost of other incidenials. |
| 22 | Supplying 25 mm and fixing of size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required including entire carriage of material in all leads, lifts, height and cost of other incidentals. |
| 23 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable ofKEI/Plaza/ Havellsmake in the existing surface/ recessed steel/ PVC conduit as required including entire carriage of material in all leads, lifts, height and cost of other incidentals. |
| 24 | 3 x 1.5 sq. mm |
| 25 | 6 x 1.5 sq. mm |
| 26 | 3 x 2.5 sq. mm |
| 27 | 2x1.5 sq mm |
| 28 | 4x1.5 s qmm |
| 29 | Supplying and fixing modular switch/ socket on the existing modular plate & switch box including connectionsof Legrand / L&T/ Anchor make but excluding modular plate etc. as required including entire carriage of material in all leads, lifts, height and cost of other incidentals. |
| 30 | 5/6 A |
| 31 | 3 pin 5/6 A socket outlet |
| 32 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connectionsof Legrand / L&T/ Anchor make but excluding modular plate etc. as required including entire carriage of material in all leads, lifts, height and cost of other incidentals. |
| 33 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate of Legrand / L&T/ Anchor make as required including entire carriage of material in all leads, lifts, height and cost of other incidentals. |
| 34 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate of Legrand / L&T/ Anchor make for modular switches in recess etc. as required including entire carriage of material in all leads, lifts, height and cost of other incidentals. |
| 35 | 8 Module (125mmX125mm) |
| 36 | 12 Module (200mmX150mm) |
| 37 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections of Legrand / L&T/ Anchor make etc. as required including entire carriage of material in all leads, lifts, height and cost of other incidentals. |
| 38 | Supplyingand fixing 5 A to 32 A rating Single pole of Legrand / L&T/ Anchor make, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including entire carriage of material in all leads, lifts, height and cost of other incidentals. |
| 39 | Supplying and fixing following rating, four pole,63 Aof Legrand / L&T/ Anchor make, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required including entire carriage of material in all leads, lifts, height and cost of other incidentals. |
AI Tender Summary
Tender Timeline
Feb 15, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender