Housing Urban and Rular Development Government Departments Closing in 0 days TDR #36257484

Annual Repair And Maintenance Of To Delhi Judicial Academy Under Sub Div-Iii Of Swbmd During 2021-22. Sh Urgent Repair And Finishing Work On External Surface Of Guest House, Judicial Hostel And Other Misc. Work Balance Work

Issued by Government Departments · safdarjung, Delhi
Tender Value
30.68 Lakhs
Estimated cost
Bid Submission
21 Feb 2023
0 days left
EMD
61378
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
safdarjung → Delhi
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Annual Repair And Maintenance Of To Delhi Judicial Academy Under Sub Div-Iii Of Swbmd During 2021-22. Sh Urgent Repair And Finishing Work On External Surface Of Guest House, Judicial Hostel And Other Misc. Work Balance Work

BOQ

Name of Work: -A/R & M/O to Delhi Judicial Academy under Sub Div-III of SWBMD during 2021-22. (SH:- Urgent repair and finishing work on external surface of guest house, judicial hostel and other misc. work) (Balance work).
Sl. No. Item Description
1Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
4Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
5Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform
6Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
7Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. 300 mm wide.
8Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm
9Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm
10Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture
11Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
12Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement
13Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
14Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
15Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster
16Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
17Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
18French spirit polishing : Two or more coats on new works including a coat of wood filler
19Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)
20Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
21Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer\"s specification. One or more coats on old work
22Finishing walls with textured exterior paint of required shade : Old work (One or more coats) applied @ 1.82 ltr/10 sqm.
23Finishing walls with Acrylic Smooth exterior paint of required shade:Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
24Supplying and stacking at site. Good earth
25Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
26Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 3989
27Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm
28Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 65 mm dia nominal bore
29Supplying pig lead at site of work.
30Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 65 mm diameter pipe
31Providing & fixing false ceiling at all heights withGRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part-4)-1970 and light reflectance of 85% (minimum) to be laidin true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising ofmain-Trunners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm andsecondary intermediate cross-Tof size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm)i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall SS screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
32Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type orof approved makeincluding tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 25 mm average thickness
33Add GST @ 6.33% due to increase of GST rate on construction works Sl. No. from 1 to 32
34Add Cost Index 31.27% Sl. No. from 1 to 32
35Less 9.50% Sl. No. from 1 to 32
36Providing and fixing manually operated Roller Blinds of vista (Vista screen classic 5% with head rail) non back out series, Aerolox vista, marvle decor or mac make as per manufacture specification in required colour or shades with other connect accessories for fixing and smooth functioning of the blinds as per direction of Engineer-in-charge). Control Unit:- The control unit is made of high strength reinforced plastic. The clutch is of warp spring. High carbon steel springs are provided to transmit motion from driving to driven member of mechanismclutch. Clutch is operated directlonally by the use of endless beaded chain. clutch never need any adjustment.Idler :- Idler is of high strength reinforces plastic, consisting of a center shaft. The idler is mounted on the bracket by using a plastic.Roller Tube:- It is a 32 mm (OD) (depending upon the size) aluminium extruded grooved tube made of alloy T6063 weighing 0.27 Kg/m control unit and idler are fixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape. Bottom rail:- It is an aluminium extruded rail with groove for fixing the fabric and powder coated in white. It is fixed to the bottom of the fabric in tension and straight. The end caps of the tube are ABS. The Size of rail shall be 21 mm (OD) made of alloy HE 9 WP weighing 0.27 kg/m
37Providing and fixing 10 mm thick required colour multi wall poly carbonate sheet of approved brand GE lexan or equivalent. The multi walled poly carbonate sheet shall be fixed to tululor steel structure with 25 mm micron powder coated aluminium Alcox section top and bottom profile and waterproof EPDM gasket on both side of joints so as to make the whole structure water tight. the alcox aluminium section shall be fixed 1.5 m centre and corners on top and bottom on steel frame structure, the weather proof EPDM gasket and aluminium profile shall be fixed with fixing sheet and sealed withsilicon sealant (winsil-20) the polycarbomate sheet and profile shall be fixed with self taping and self drilling 55mm long steel screws fixed not morethan 300mm centre to centre, the rate shall be inclusive of cost of all material and lanour involved such as poly carbonate sheet, alcox system aluminium profile and fixing sheet, EPDM gasket self taping screws, nut bolts, silicon sealant (winsil-20) or any other material required for fixing for the sheet but excluding (The cost of steel structure which shall be paid separately)The work shall be complete in all respect as per direction of Engineer-in-charge. Finished curved surface area of poly carbonate sheet shall be measured for the purpose of the payment. Nothing extra shall be payable for making curventure in poly carbonate sheets
38Providing and fixing 19 mm thick commercial block board (BWP) confirming to IS : 1659 for wall panelling, cup board, tables and other furniture items etc including synthetic resing, adhensive nails and necessary screws etc complete as per direction of Engineer-in-charge.
39Rebuilding the section of structutal damaged RCC elements to its original size or asper consultants recommendations in thickness up to 25mm in 2 layers of 10 mm and 15mm each by providing and applying with pre-batched, one component fiber reinforced cementitious patch repair mortar Sika® MonoTop® -122 F or equivalent having compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 5N/ mm2 (7 days) according to ASTM C 293-79. complete as per direction of Engineer-in-charge.

AI Tender Summary

OUR REF NO 36257484
AUTHORITY Government Departments
TENDER VALUE 30.68 Lakhs
LAST DATE 21-02-2023
Authority
Authority Name Public Works Department
Work Description Annual Repair And Maintenance Of To Delhi Judicial Academy Under Sub Div-Iii Of Swbmd During 2021-22. Sh Urgent Repair And Finishing Work On External Surface Of Guest House, Judicial Hostel And Other Misc. Work Balance Work
Basic Detail
Tender No 81/EE/SWBDCMD/2022-23
Bidding Type Tender
Location
City safdarjung
State Delhi
Key Dates
Publish Date 14 Feb 2023
Submission Date 21 Feb 2023
Open Date 21 Feb 2023
Finance
Tender Value 30.68 Lakhs
Tender Fee Ref. Documents
EMD 61378
Exemption Not Available
Document List
0d54d9fd-8117-4a41-8abb-03c62e48ea68.html
BOQ_307947.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 14, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 21, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 21, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

0d54d9fd-8117-4a41-8abb-03c62e48ea68.html

xls

BOQ_307947.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender