Tender For Re-Construction Of Compound Wall Around Sub Divisional Office Distribution System Of Various Area Of Pattan Town Under District Capex Budget 2022-23 (Phe Sector)
Tender Value
47.94 Lakhs
Estimated cost
Bid Submission
21 Feb 2023
0 days left
EMD
95880
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pattan → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Re-Construction Of Compound Wall Around Sub Divisional Office Distribution System Of Various Area Of Pattan Town Under District Capex Budget 2022-23 (Phe Sector)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected |
| 3 | All Kinds of soil. |
| 4 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 5 | Cutting road and making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri and labour required. Water bound macadam. |
| 6 | Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing,ramming, all leads lifts and all carriages complete. |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate androofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 15 | 15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix :1 : 4 ( 1 cement : 4 fine sand) |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 17 | Foundations, footings, bases for columns |
| 18 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 19 | Suspended floors, roofs, landings, balconies and access platforms. |
| 20 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 21 | Arches, domes, vaults upto 6 m span |
| 22 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 23 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):KD/ Silver wood |
| 25 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.KD/ Silver wood |
| 26 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :KD/ Silver wood |
| 27 | Providng and fixing panelled or panelled shutters for walls using 15mm thick panelling including ISI marked M.S pressed Butt hinges bright finsihed of required size with necessary screws15mm thick silver wood/K.D |
| 28 | Providing and fitting: |
| 29 | 150mm hinges |
| 30 | 100mm hinges |
| 31 | Tower Bolts (15cm long) |
| 32 | Handles (20cm long) |
| 33 | Handles (10cm long) |
| 34 | Providing and fixing of electrical points (heating and lighting) including cost of wire switches, necessary MCB\"s Switches, Switch boards,Ceiling rose reputed make ISI mark Screws,casing conduit material including all sorts of carriage and labour charges req for the job. |
| 35 | Lighting points |
| 36 | Heating Points |
| 37 | Bulk Head |
| 38 | Providing & fixing of 1200mm sweep ceiling fans complete with accessories including dimmer of ISI mark complete. |
| 39 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown |
| 40 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 41 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.(1 kg of water proofing material in 50 kg of cement) |
| 42 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand) |
| 43 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Light |
| 44 | 20 mm dia. nominal bore |
| 45 | 25 mm dia. nominal bore |
| 46 | 40 mm dia. nominal bore |
| 47 | 50 mm dia. nominal bore |
| 48 | 65 mm dia. nominal bore |
| 49 | 80 mm dia. nominal bore |
| 50 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 51 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete |
| 52 | 25 to 40 mm nominal bore |
| 53 | 50 to 80 mm nominal bore |
| 54 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 55 | 20 mm nominal bore |
| 56 | 25 mm nominal bore |
| 57 | 40 mm nominal bore |
| 58 | 50 mm nominal bore |
| 59 | 80 mm nominal bore |
| 60 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). |
| 61 | 20 mm dia |
| 62 | 25 mmdia |
| 63 | 50 mm dia. |
| 64 | 80 mm dia. |
| 65 | Providing fixing of MS lid cover of 0.90x0.90m with angle iron frame including locking arrangement and all carraiges complete. |
| 66 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 67 | Providing laying of good earth for levelling of grounds including compaction 20 cm each layer including carraige |
| 68 | Providing and fixing of MS flanged joints (10 to 12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job. |
| 69 | 80 mm dia. pipe |
| 70 | 65 mm dia. pipe |
| 71 | 50 mm dia. pipe |
| 72 | Manufacturing providing fixing of MS Bends/ Tees including carraige of welding machine upto site of work incl. cost of nuts, bolts, rubber washers etc., complete job. |
| 73 | Providing/ Fixing of G.I pipe specials to pipe line at spots. |
| 74 | Reducer Socket 80x65mm |
| 75 | Reducer Socket 65x50mm |
| 76 | Reducer Socket 50x40mm |
| 77 | Reducer Socket 40x25mm |
| 78 | Reducer Socket 25x20mm |
| 79 | 80 mm dia Union |
| 80 | 65 mm dia Union |
| 81 | 50 mm dia Union |
| 82 | 40 mm dia Union |
| 83 | 25 mm dia Union |
| 84 | 20 mm dia Union |
| 85 | 25mm dia Elbow |
| 86 | 20mm dia Elbow |
| 87 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments. |
| 88 | 80 mm dia. Class 1 |
| 89 | 100 mm dia. Class 1 |
| 90 | Providing & fixing of 50 litre capacity gyser of approved quality (venus make or equivalent). |
| 91 | carriage of material from source to site of work by Mechnical Transport including loading unloading and stacking etc. |
| 92 | Cement /Steel max lead 28 Km |
| 93 | Sand max lead 35 Km |
| 94 | Stone aggregate 20mm nominal size max lead 30 Km |
| 95 | Stone aggregate 40mm nominal size max lead 30 Km |
| 96 | Bricks max lead 55 Km |
AI Tender Summary
Tender Timeline
Feb 14, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 22, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender