Tender For Construction Of Hostel Building For 12 Female And 36 Male In Thana At Kotwali Nagar District-Fatehpur.
Tender Value
1.38 Crore
Estimated cost
Bid Submission
20 Feb 2023
0 days left
EMD
2.76 Lakhs
Bank guarantee accepted
Document Fee
17700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kotwali → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Hostel Building For 12 Female And 36 Male In Thana At Kotwali Nagar District-Fatehpur.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Hostel Building for 12 Female and 36 Male in Thana at Kotwali Nagar District-Fatehpur |
| 2 | (A) HOSTEL BUILDING (CIVIL WORK) |
| 3 | Excavation in foundation for dtructure as per drawing and technical specification including setting out, construction shoring and bracing removal of atumps and other deleterious and disposal upto lead of 50m dressing of sides and bottam and backfilling in trenches with excavatedwith excavated suitable material |
| 4 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. |
| 5 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, ramming, dressing etc rate to include cost of all materials, labour and T & P etc required for proper completion of the work. |
| 6 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Raft foundation excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item. |
| 7 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Plinth Beam excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item |
| 8 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Column excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item |
| 9 | (a) Ground floor |
| 10 | (b) First floor |
| 11 | (c) Second floor |
| 12 | (d) Third floor |
| 13 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Lintel excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item |
| 14 | (a) Ground floor |
| 15 | (b) First floor |
| 16 | (c) Second floor |
| 17 | (d) Third floor |
| 18 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Projection excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item |
| 19 | (a) Ground floor |
| 20 | (b) First floor |
| 21 | (c) Second floor |
| 22 | (d) Third floor |
| 23 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Beam excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item |
| 24 | (a) Ground floor |
| 25 | (b) First floor |
| 26 | (c) Second floor |
| 27 | (d) Third floor |
| 28 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Slab excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item |
| 29 | (a) Ground floor |
| 30 | (b) First floor |
| 31 | (c) Second floor |
| 32 | (d) Third floor |
| 33 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks. |
| 34 | (a) Ground floor |
| 35 | (b) First floor |
| 36 | (c) Second floor |
| 37 | (d) Third floor |
| 38 | Class-150 (Non Modular) brick work in 1:6 cement and Coarse sandmortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 39 | Brick work in super-structure above plinth level up to floor two level (up to two storeys) includingnecessary cutting and moulding of bricks as requiredand also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:6 cement & coarse sand) (230mm wall) |
| 40 | (a) Ground floor |
| 41 | (b) First floor |
| 42 | (c) Second floor |
| 43 | (d) Third floor |
| 44 | Same as in item no. 14but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. |
| 45 | (a) Ground floor |
| 46 | (b) First floor |
| 47 | (c) Second floor |
| 48 | (d) Third floor |
| 49 | Structural steel work Hold Fast in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 50 | (a) Ground floor |
| 51 | (b) First floor |
| 52 | (c) Second floor |
| 53 | (d) Third floor |
| 54 | Mild steel or iron workofsmall sizes and sections suchas Angle Iron door frame etc. ( when notincludedinan overall rates) wroughttorequiredfromincluding supply ofsteel anditswastage includingcostof bolts, nuts if required forandwelding, grinding and making holes as required completion of workfabricationofholesdoors, chaukhats nosing. |
| 55 | (a) Ground floor |
| 56 | (b) First floor |
| 57 | (c) Second floor |
| 58 | (d) Third floor |
| 59 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces |
| 60 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters: (35mm thick) |
| 61 | (a) Ground floor |
| 62 | (b) First floor |
| 63 | (c) Second floor |
| 64 | (d) Third floor |
| 65 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. |
| 66 | (a) Ground floor |
| 67 | (b) First floor |
| 68 | (c) Second floor |
| 69 | (d) Third floor |
| 70 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC \"C\" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm |
| 71 | (a) Ground floor |
| 72 | (b) First floor |
| 73 | (c) Second floor |
| 74 | (d) Third floor |
| 75 | Structural steel work Z-Sectionin single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 76 | (a) Ground floor |
| 77 | (b) First floor |
| 78 | (c) Second floor |
| 79 | (d) Third floor |
| 80 | Structural steel Grill work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete. |
| 81 | (a) Ground floor |
| 82 | (b) First floor |
| 83 | (c) Second floor |
| 84 | (d) Third floor |
| 85 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with (4.0mm thick float glass) |
| 86 | (a) Ground floor |
| 87 | (b) First floor |
| 88 | (c) Second floor |
| 89 | (d) Third floor |
| 90 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 91 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. |
| 92 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters Kiln seasoned and chemically treated hollock wood |
| 93 | (a) Ground floor |
| 94 | (b) First floor |
| 95 | (c) Second floor |
| 96 | (d) Third floor |
| 97 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. |
| 98 | Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 99 | (a) Ground floor |
| 100 | (b) First floor |
| 101 | (c) Second floor |
| 102 | (d) Third floor |
| 103 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screwsetc. complete :250x16mm |
| 104 | (a) Ground floor |
| 105 | (b) First floor |
| 106 | (c) Second floor |
| 107 | (d) Third floor |
| 108 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x16mm |
| 109 | (a) Ground floor |
| 110 | (b) First floor |
| 111 | (c) Second floor |
| 112 | (d) Third floor |
| 113 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm |
| 114 | (a) Ground floor |
| 115 | (b) First floor |
| 116 | (c) Second floor |
| 117 | (d) Third floor |
| 118 | 12mm thick plaster in inner walls with proportion of 1:6 cement & approved coarse sand |
| 119 | (a) Ground floor |
| 120 | (b) First floor |
| 121 | (c) Second floor |
| 122 | (d) Third floor |
| 123 | 12mm thick plaster in Outer walls with proportion of 1:6 cement & approved coarse sand |
| 124 | (a) Ground floor |
| 125 | (b) First floor |
| 126 | (c) Second floor |
| 127 | (d) Third floor |
| 128 | Supply & fillingof cinder in sunken portion of building including breaking into required sizes including supply of all material, labour, T&P required for proper completion of work. |
| 129 | (a) First floor |
| 130 | (b) Second floor |
| 131 | (c) Third floor |
| 132 | (d) Terrace floor |
| 133 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 134 | (a) First floor |
| 135 | (b) Second floor |
| 136 | (c) Third floor |
| 137 | (d) Terrace floor |
| 138 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 139 | (a) Ground floor |
| 140 | (b) First floor |
| 141 | (c) Second floor |
| 142 | (d) Third floor |
| 143 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm includingpointing the joints with white cement and matching pigment etc., complete. |
| 144 | (a) Ground floor |
| 145 | (b) First floor |
| 146 | (c) Second floor |
| 147 | (d) Third floor |
| 148 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.. (40mm) |
| 149 | (a) Ground floor |
| 150 | (b) First floor |
| 151 | (c) Second floor |
| 152 | (d) Third floor |
| 153 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3(1 cement : 3 coarse sand), finished with a floating coat of neat cement. |
| 154 | (a) Ground floor |
| 155 | (b) First floor |
| 156 | (c) Second floor |
| 157 | (d) Third floor |
| 158 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete... (Size of Tile 600x600 mm) (Kajaria. Somany or Equivalent) |
| 159 | (a) Ground floor |
| 160 | (b) First floor |
| 161 | (c) Second floor |
| 162 | (d) Third floor |
| 163 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.. (Size of Tile 600x600 mm)(Kajaria. Somany or Equivalent) |
| 164 | (a) Ground floor |
| 165 | (b) First floor |
| 166 | (c) Second floor |
| 167 | (d) Third floor |
| 168 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red |
| 169 | (a) Ground floor |
| 170 | (b) First floor |
| 171 | (c) Second floor |
| 172 | (d) Third floor |
| 173 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: With average thickness of 120 mm and minimum thickness at khurra as 65 mm..(The waterproofing work to be carried out by specilized agencies and veryfy the all documents mentioned in office order no. 3690/P.C.L/Head Office/ T-6) |
| 174 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 175 | (a) Ground floor |
| 176 | (b) First floor |
| 177 | (c) Second floor |
| 178 | (d) Third floor |
| 179 | One priming coat & one coat oil distemper on new work including supply of material, labour T&P etc. required for proper completion of the work. (Two Coat) |
| 180 | (a) Ground floor |
| 181 | (b) First floor |
| 182 | (c) Second floor |
| 183 | (d) Third floor |
| 184 | Finishing walls with Primium Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)(Apex, Ultima, Weather Coat, All guard) Asian, Berger, |
| 185 | (a) Ground floor |
| 186 | (b) First floor |
| 187 | (c) Second floor |
| 188 | (d) Third floor |
| 189 | Painting or vernishing on iron work in small areas of new work with one coat of rady mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic vernish, including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 190 | (a) Ground floor |
| 191 | (b) First floor |
| 192 | (c) Second floor |
| 193 | (d) Third floor |
| 194 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 195 | (a) Ground floor |
| 196 | (b) First floor |
| 197 | (c) Second floor |
| 198 | (d) Third floor |
| 199 | Making Apron |
| 200 | (B) HOSTEL BUILDING (ELECTRICAL WORK) |
| 201 | Point Wiring : |
| 202 | Wiring point for light with 1.5 sq.mmFRLSH PVC insulated multistrand single core copper conductorcable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductorcable as earth continuity wire , GP box, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backalite sheet etc.complete in all respect as directed including matching colour wash. |
| 203 | Wiring point for two ways light point with 1.5 sq.mmFRLSH PVC insulated multistrand single core copper conductorcable in PVC conduit pipePartly concealed in the wall and partly Laid in slabalong with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductorcable as earth continuity wire , GP box and two number two ways piano type switches & ceiling rose/angle/batten holder on 3mm thick , phenolic laminated backelite sheet etc., complete in all respect,as directed, including matching colour wash. |
| 204 | Wiring point for fan/fresh air fan (light duty exhaust fan) with1.5 sq.mmFRLSH PVC insulated multistrand single core copper conductorcable inPVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with1.5sqmm. FRLSH PVC insulated multistrand single core copper conductorcable as earth continuity wire , GP box, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet,etc.complete in all respect,as directed, including matching colour wash. |
| 205 | Wiring point for plug with 1.5 sq.mmFRLSH PVC insulated multistrand single core copper conductorcable in PVC conduit pipe Partly concealed in the wall and partly Laid in slabalong with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductorcable as earth continuity wire , GP box, piano type switch & socket etc.complete in all respect, as directed, including matching colour wash. |
| 206 | Wiring point for Exhaust fan with 1.5 sq.mmFRLSH PVC insulated multistrand single core copper conductorcable in PVC conduit pipePartly concealed in the wall and partly Laid in slabalong with the reinforcement before concreting complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box and 15 amp piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet etc.complete in all respect, as directed, including matching colour wash. |
| 207 | Add for light /fan point with moduler type switch in place of piano type switch. |
| 208 | Add for 2 way light point with moduler type switch in place of piano type switch. |
| 209 | Add for plug point with moduler type switch in place of piano type switch. |
| 210 | Add for HPMV/Exhaust Fan point with moduler type switch in place of piano type switch. |
| 211 | Submains (Cooper Wires) : |
| 212 | Supply & wiring of submains with 2 nos.1.5 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm diaheavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with1 no. 1.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. |
| 213 | Supply & wiring of submains with 2 nos.2.5 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slabalong with the reinforcement before concreting, with1 no. 1.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. |
| 214 | Supply & wiring of submains with 2 nos.4 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 2.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. |
| 215 | Supply & wiring of submains with 2 nos.6 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 4 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. |
| 216 | Supply & wiring of submains with 4 nos. 6 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 2 no. 6 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. |
| 217 | Supply & wiring of submains with 4 nos.10 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 40 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 2 no. 6 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. |
| 218 | Lighting Fixtures (Lights/Fans) : |
| 219 | Supply & fixing of Batton/Angle holderincluding makingconnectionetc. as required. |
| 220 | Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA |
| 221 | Supply and fixing of water tight oblong 10 Watt LEDbulk head luminaire having die cast housing with driver set confirming to IP 65 and above Protection.Complete in all respect. CAT. - AAA |
| 222 | Supply and fixing of 3 watt to 6 watt LED(spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror Light) |
| 223 | Supply of ceilling fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. BEE 5 Star rated-1200 mm sweep |
| 224 | Armoured Cables (Cable/Gland/Lug) : |
| 225 | Supplying and laying ofaluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed bythe Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Followingsize 35 sq mm x 3-1/2core |
| 226 | Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earthas per direction of engineer-incharge. for cablesize 35 sq mm x 3-1/2core |
| 227 | Supply and fixing ofplain or pin type copper tin plated cable socket (lug) to cable leadsfor pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cablesize 35 sq mm |
| 228 | Earthing Work : |
| 229 | Supply and burying of Safe Earthing Electrod T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mmx3.2mm, inner pipe 26.9mm x 2.6 mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCm) having anti corrosive& conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board,cost of 25x3 G.I. Strip will be extra) Make : As approved in U.P.P.W.D. & C.P.R.I. Certified. |
| 230 | Supply and laying of 25mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects. |
| 231 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. |
| 232 | The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only. |
| 233 | The minimum clearances between bus bars shall be as follows : |
| 234 | Phase to phase - minimum 20mm |
| 235 | Phase to neutral-minimum 15mm |
| 236 | CUBICAL PANEL BOARD ( MCCB TYPE ) |
| 237 | PANEL |
| 238 | Incoming : |
| 239 | one (1)No.200Amp. MCCB-1No. |
| 240 | Bus Bar : |
| 241 | One (1) No.200 A, TPN aluminimum bus bar of suitable length. |
| 242 | Outgoing : |
| 243 | 100 Amp. 4P MCCB- 2 No. ( VTPN D.B) |
| 244 | 63 Amp. 4P MCB- 4 No. |
| 245 | 40 Amp.4PMCB- 4 No. |
| 246 | 63 Amp.4PMCCB- 2 No. (spare) |
| 247 | OR outgoing as per site requirment(AS/SLD) |
| 248 | (Complete as per requirment directed by Project Manager.) |
| 249 | DBs & MCBs : |
| 250 | Supply and fixing of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve. CAT A |
| 251 | Supply and fixing of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve. CAT A |
| 252 | Supply and fixing of 6 Amp. to 32 Amp. TP MCB (10 KA) C Curve. CAT A |
| 253 | Supply and fixing of 40 Amp. TP MCB (10 KA) C Curve. CAT A |
| 254 | Supply and fixing of 63 Amp. TP MCB (10 KA) C Curve. CAT A |
| 255 | Supply and fixing of40 Amp. FP MCB (10 KA) C Curve. CAT A |
| 256 | Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A |
| 257 | Supply and fixing of 100 amp 4 pole MCCB(25 KA ) thermal magnetic relese. CAT A |
| 258 | Supply and fixing of surface/Flush mounting 4ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A |
| 259 | Supply and fixing of surface/Flush mounting 4 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A |
| 260 | Supply and fixing of surface/ Flush mounting 4ways VTPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A |
| 261 | Supply and fixing of surface/Flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A |
| 262 | Miscellaneous Items : |
| 263 | Supply and Fixing of Danger Board fabricated from 10 gauge M.S. Sheet as per I.E. Rules |
| 264 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. |
| 265 | Erection and testing of exhaust fan on the existing hole with suitable size rag bolt nut & washer etc. complete in all respects. |
| 266 | Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finshing propely complete in all respect. |
| 267 | Supply and Fixing of shock treatment chart prescribedas per I.E. Rules.duly framed with glass and supported from back with hard board or shoft board with supply of all material ,labour,T&P for proper completion of work. |
| 268 | Supply and Laying of 1800*900*12mm thick chequerd rubber matting of tested quality. complete in all respect. as per I.E. Rules. |
| 269 | Supply and fixing of power plug with 20A/250V flush type Moduler switch and 5 Pin 20A/250V flush type universal Moduler socket in suitable Conceled MS Box including supply of all material, labour,T&P etc.required for proper completion of work. |
| 270 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. |
| 271 | Electronic Items : |
| 272 | Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 273 | Telephone/TV Outlet Sockets & Cables etc. : |
| 274 | Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect. |
| 275 | Supply & fixing of 225/230mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. |
| 276 | Supply & fixing of 300mm sweep ventilating (Medium Heavy Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Double ball bearing /Copper motor /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 70/85 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Speed : 900/1400 RPM. Complete in all respect. |
| 277 | (C) HOSTEL BUILDING (PLUMBING WORK) |
| 278 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 279 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 280 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040 mm bowl depth 250 mm |
| 281 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 282 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 283 | i) 32 mm dia |
| 284 | ii) 40 mm dia |
| 285 | Providing and fixing soil, waste and vent pipes : Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 286 | (a) 75 mm O.D. |
| 287 | (b) 110 mm O.D. |
| 288 | Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 289 | (a) 75 mm |
| 290 | (b) 110 mm |
| 291 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : |
| 292 | (a) 75 mm O.D. |
| 293 | (b) 110 mm O.D. |
| 294 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : |
| 295 | (a) 75 mm |
| 296 | (b) 110 mm |
| 297 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) |
| 298 | (a) 75 mm |
| 299 | (b) 110 mm |
| 300 | Providing and fixing plain bend of required degree. Sand cast iron S&S as per IS - 3989 |
| 301 | (a) 75 mm |
| 302 | (b) 110 mm |
| 303 | Providing and fixing heel rest sanitary bend Sand cast iron S&S as per IS - 3989 |
| 304 | (a) 75 mm |
| 305 | (b) 110 mm |
| 306 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989 |
| 307 | (a) 75 mm |
| 308 | (b) 100 mm |
| 309 | Providing and fixing terminal guard : Sand cast iron S&S as per IS - 3989 |
| 310 | (a) 75 mm |
| 311 | (b) 100 mm |
| 312 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 313 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall |
| 314 | (a) 15 mm nominal outer dia pipes |
| 315 | (b) 20 mm nominal outer dia pipes |
| 316 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 317 | (a) 20 mm nominal outer dia Pipes |
| 318 | (b) 25 mm nominal outer dia Pipes |
| 319 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. |
| 320 | (a) 15 mm nominal outer dia pipes |
| 321 | (b) 20 mm nominal outer dia pipes |
| 322 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 25mm dia, nominal bore |
| 323 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 324 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) |
| 325 | (a) 15 mm nominal outer dia pipes |
| 326 | (b) 20 mm nominal outer dia pipes |
| 327 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore |
| 328 | Providing and fixingG.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) |
| 329 | (a) 15mm nominal bore |
| 330 | (b) 20mm nominal bore |
| 331 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore |
| 332 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore |
| 333 | Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore |
| 334 | Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. |
| 335 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : |
| 336 | (a) 100 mm O.D. |
| 337 | (b) 150 mm O.D. |
| 338 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 160/150 mm diameter pipe |
| 339 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 340 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Fisnihed with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 341 | Extra over Item No. 24.27 for every additional depth of 0.10 metre or part there of main hole. Size 900 x 800 mm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 342 | (D) HOSTEL BUILDING (SEPTIC TANK) |
| 343 | Earth work in excavation |
| 344 | P.C.C. in 1 : 4: 8 with cement, c.sand & 40 mm gauge stone ballast |
| 345 | Brick work in foundation in 1 : 3 cement & coarse sand |
| 346 | R. C. C. in 1 : 1.5 : 3 in Slab |
| 347 | Reinforcement Work |
| 348 | Brick work in foundation in 1 : 4 sand |
| 349 | 40mm thick c.c. flooring |
| 350 | 18 mm thick plaster in 1: 3 cement & Coursesand |
| 351 | Supply & Febrication of M. S. Steps |
| 352 | 500 mm diameter C.I. cover (medium duty) the cover to be not less than 58 kg |
| 353 | C.I. Cowel |
| 354 | C.I. Plain bend |
| 355 | C.I. Single equal plaing junction |
| 356 | (E) SOAK PIT |
| 357 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 358 | (F) INTERLOCKING |
| 359 | Earth work in excavation |
| 360 | P.C.C. in 1 : 4 : 8 with cement, c. sand & 40 mm gauge stone ballast |
| 361 | Granuler Sub Base in interlocking Area |
| 362 | Brick work in foundation in 1 : 4 cement & coarse sand |
| 363 | P /F 80 mm thick cement concrete interlocking paver block of M-30. |
| 364 | Sand filling |
| 365 | (G) SUBMERSIBLE PUMP |
| 366 | External W/S arrangements with T.W. boring of 150 mm dia with 110 mm dia P.V.C. pipe assembly, 2.00 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc . |
| 367 | (a) 110MM PVC casing pipe of ISI mark. |
| 368 | (b) 110MM PVC slotted pipe of ISI mark. |
| 369 | P/ F 50mm GI pipe (B) class. |
| 370 | Nylon mesh for filter. |
| 371 | Plastic dori. |
| 372 | Solvent cement. |
| 373 | 110mm End cap. |
| 374 | 110mm Submersible cap. |
| 375 | 50mm MS clamp (Heavy). |
| 376 | 50mmGI elbow. |
| 377 | 50mm X 110mm GI nipple. |
| 378 | 2 HP 9 Stage submersible pump of ISI mark with automatic panel. |
| 379 | 2.5 sqm. Submersible cable. |
| 380 | Drilling charges for 6\" dia tubewell. |
| 381 | Pea Gravel. |
| 382 | 2\" MS socket. |
| 383 | Cartage of material upto site. |
| 384 | G.S.T. Extra as per Applicable |
AI Tender Summary
Tender Timeline
Feb 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 20, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender