|
| 1 | Earthwork in excavation in ordinary soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth complete as per the direction of the Engineer-in-charge. |
| 2 | Filling foundation and plinth with clean river sand including well watered and rammed with all labour cost, conveyance, royalty and all taxes of materials etc. complete as per the direction of Engineer-in-charge. |
| 3 | Providing and laying Cement Concrete (1:3:6) using 40 mm size hard granite metal free from weatheredskinned and other deleterious materials including hoisting and laying concrete and curing for required days including all laboursT&P, cost, conveyance, royalty all applicable taxes and all incidental charges required to complete the work etc. complete as per direction of Engineer-in-charge. |
| 4 | Providing P.C.C. M-25 with 20mm down graded coarse aggregates of approved quality mixing by concrete mixure and placing manually, compacting with vibrator including hire and running charges of mixure, vibrator with cost, conveyance, royalty of all materials, labour charges and materials complete as per direction of the Engineer-in-Charge. |
| 5 | Rigid and smooth centering and shuttering for R.C.C works including false works and dismantling them after casting including cost of materials etc. complete as per direction of Engineer-in-charge. |
| 6 | RAFT |
| 7 | WALL |
| 8 | Single under reamed pile foundation 3.00m with RCC M-20 using 12mm and down graded size H.G.C.B chips of approved quality including hoisting, laying concrete with rigid smooth centering / shuttering, necessary scaffolding, including cost, conveyance of all materials, labour, T&P required for the work, royalty etc. complete as per specification and direction of Engineer-in-Charge. |
| 9 | Supplying, cutting, bending, binding and placing in position uncoated HYSD bar reinforcement as per techncial specification including all labour, cost, conveyance and all taxes of MS Rod, binding wire etc. complete as per direction of Engineer-in-Charge. |
| 10 | Providing P.C.C. M-15 with 20mm down graded coarse aggregates of approved quality mixing by concrete mixure and placing manually, compacting with vibrator including hire and running charges of mixure, vibrator with cost, conveyance, royalty of all materials, labour charges and materials complete as per direction of the Engineer-in-Charge. |
| 11 | Painting on concrete surface by providing and applying 2 coast of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efforescence and applying paint @ of 1 ltr for 2 Sqm including all labour T&P, cost, carriage,applicable taxes and incidental charges etc. complete as directed by Engineer-in-charge. |
| 12 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of sand, compacting and proper embeding / laying over inter locking paver blocks into the sand bedding layer through vibratory compaction by usingplate vibrator, filling the joints with sand and cutting of paver blocks as per required size and patterns, fininshing and sweeping extra sand, complete all as per direction of Engineer-in-Charge. |
| 13 | Earth work in suitable type of soil in borrow area, loading into transportation vehicle manually or mechanically and transportation of earth by mechanical means unloading the same over the approved surface of embankment in proper profile with 5.00Km leadsincluding rough dressing and breaking clods to maximum 5cm to 7cm including removal of roots, bushes other deleterious materials from transported earth with all cost, carriage, royalty, labour cess and laying in layers not exceeding 22.50cm in depth with sheep foot roller, hire and running charges of all machineries with all labour, T&P required for the work etc.complete in all respect as per specification and direction of Engineer-in-Charge. |
| 14 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustradeof size32mmx32mmx2mm @0.90mtr CIC andstainless square pipe of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. all complete as per the direction of Engineer-in-Charge. |
