Tender For Water Proofing Treatment
Tender Value
5.09 Lakhs
Estimated cost
Bid Submission
20 Feb 2023
0 days left
EMD
10194
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
yelahanka → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Water Proofing Treatment Water Proofing Treatment Of Jawan Barracks Toilets 06 Nos Of Ftr Hq (Spl Ops) Bsf Odisha At Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 2 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work |
| 3 | Removing dry or oil bound distemper, water proofing cement paint ... necessary repairs to scratches etc. complete. |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including hardening liquid i.e Dr. Fixit or equivalent & cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) |
| 6 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 7 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operationsincluding all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 8 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 9 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 10 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 11 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 12 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter |
| 13 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 14 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 15 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 16 | Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia |
| 17 | Cleaning of surface wall and floor tiles by using chemical/ acidall complete as per direction of Engineer-in-charge. |
| 18 | Providing and filling of epoxy grouting by using MYK Laticrete compound including cutting and grooving the tiles joint of nearest matching colour of tiles in the 2 to 4 mm wide and 4 to 6 mm depthall complete as per direction of Engineer-in-charge. |
| 19 | Providing laying and fixing unplasticised rigid PVCsewrage pipes confirming to IS : 13592 Type B,including orking pressure 6 kg/Sqcm & jointing with seal ring confirming to IS: 5832 of approved quality as per direction of engineer in charge.PVCpipe 110 mm dia. |
| 20 | Providing laying and fixing unplasticised rigid PVCsewrage pipes confirming to IS : 13592 Type B,including orking pressure 6 kg/Sqcm & jointing with seal ring confirming to IS: 5832 of approved quality as per direction of engineer in charge.PVCpipe 110 mm dia. |
| 21 | Providing and fixing Pvc bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.Pvc plain bend with door . Pvc plain bend with door 110 mm dia: |
AI Tender Summary
Tender Timeline
Feb 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender